-- ============================================================================
-- AT-ETH.MIB, Allied Telesis enterprise MIB: FLASH module
--
-- Extracted from ATROUTER.MIB of pre 2.9.1 release
--
-- June 2006, Stan Xiang
--
-- Copyright (c) 2006 by Allied Telesis, Inc.
-- All rights reserved.
-- 
-- ============================================================================

AT-FLASH-MIB DEFINITIONS ::= BEGIN

IMPORTS
    MODULE-IDENTITY, 
    OBJECT-TYPE, 
    NOTIFICATION-TYPE
    	FROM SNMPv2-SMI

    DisplayString,
    TruthValue
        FROM SNMPv2-TC

	ifIndex
		FROM IF-MIB

	modules,
	DisplayStringUnsized
		FROM AT-SMI-MIB
;
                                 
flash MODULE-IDENTITY
    LAST-UPDATED "200606281222Z"
    ORGANIZATION "Allied Telesis, Inc"
	CONTACT-INFO
	    "http://www.alliedtelesis.com"
	DESCRIPTION
	    "This MIB file contains definitions of managed objects for the
	    FLASH module. "

    REVISION "200606281222Z"
DESCRIPTION
	"Initial Revision"

::= { modules 31}

flashGetFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash get operations that have failed."
    ::= { flash 1 }

flashOpenFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash open operations that have failed."
    ::= { flash 2 }

flashReadFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash read operations that have failed."
    ::= { flash 3 }

flashCloseFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash close operations that have failed."
    ::= { flash 4 }

flashCompleteFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash complete operations that have failed."
    ::= { flash 5 }

flashWriteFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash write operations that have failed."
    ::= { flash 6 }

flashCreateFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash create operations that have failed."
    ::= { flash 7 }

flashPutFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash put operations that have failed."
    ::= { flash 8 }

flashDeleteFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash delete operations that have failed."
    ::= { flash 9 }

flashCheckFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash check operations that have failed."
    ::= { flash 10 }

flashEraseFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash erase operations that have failed."
    ::= { flash 11 }

flashCompactFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash compaction operations that have failed."
    ::= { flash 12 }

flashVerifyFailure OBJECT-TYPE
    SYNTAX      INTEGER 
    MAX-ACCESS  read-only
    STATUS      current
    DESCRIPTION
            "The number of flash verify operations that have failed."
    ::= { flash 13 }

flashTrap 	OBJECT IDENTIFIER ::= { flash 0}
flashFailureTrap NOTIFICATION-TYPE
    OBJECTS  { flashGetFailure, flashOpenFailure, flashReadFailure,
    		 flashCloseFailure, flashCompleteFailure, flashWriteFailure,
    		 flashCreateFailure, flashPutFailure, flashDeleteFailure, 
    		 flashCheckFailure, flashEraseFailure, flashCompactFailure,
    		 flashVerifyFailure }
    STATUS      current
    DESCRIPTION
                "A flash failure trap is generated when any of the above 
                flash counter is incremented and the failure type is
                sent in the trap."
    ::= { flashTrap 1 }


END