-- ============================================================================ -- AT-ETH.MIB, Allied Telesis enterprise MIB: BRI module -- -- Extracted from ATROUTER.MIB of pre 2.9.1 release -- -- June 2006, Stan Xiang -- -- Copyright (c) 2006 by Allied Telesis, Inc. -- All rights reserved. -- -- ============================================================================ AT-BRI-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, NOTIFICATION-TYPE FROM SNMPv2-SMI DisplayString, TruthValue FROM SNMPv2-TC ifIndex FROM IF-MIB modules, DisplayStringUnsized FROM AT-SMI-MIB ; bri MODULE-IDENTITY LAST-UPDATED "200606281222Z" ORGANIZATION "Allied Telesis, Inc" CONTACT-INFO "http://www.alliedtelesis.com" DESCRIPTION "This MIB file contains definitions of managed objects for the BRI module. " REVISION "200606281222Z" DESCRIPTION "Initial Revision" ::= { modules 41 } -- This group consists of a table of BRI interfaces indexed -- by ifIndex which provide MIB objects not given in a convenient form by -- other standard MIBs. There is also a BRI channel MIB indexed by ifIndex -- and channel index which gives information about the channels on the -- interface. -- The BRI interface table. Each entry is a BRI interface on the router. briIntTable OBJECT-TYPE SYNTAX SEQUENCE OF BriIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of BRI interfaces." ::= { bri 1 } briIntEntry OBJECT-TYPE SYNTAX BriIntEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry in the BRI interfaces table." INDEX { briIntIndex } ::= { briIntTable 1 } BriIntEntry ::= SEQUENCE { briIntIndex INTEGER, briIntBoardIndex INTEGER, briIntBoardPosition INTEGER, briIntMode INTEGER, briIntTdmChannelMap INTEGER, briIntIsdnChannelMap INTEGER } briIntIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the BRI interface." ::= { briIntEntry 1 } briIntBoardIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The index in the arBoardTable of the board on which this BRI interface resides." ::= { briIntEntry 2 } briIntBoardPosition OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The position on this BRI interface's board of this BRI interface." ::= { briIntEntry 3 } briIntMode OBJECT-TYPE SYNTAX INTEGER { isdn (1), tdm (2), mixed (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mode of operation of this BRI interface. The value isdn means that the entire interface is operating as an ISDN interface, the value tdm means that the entire interface is operating as TDM groups and the value mixed means that some channels in the interface are dedicated to ISDN and some to TDM groups." ::= { briIntEntry 4 } briIntTdmChannelMap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A bit map of the channels in the BRI interface which are dedicated to TDM. Channel B1 has channel map value of 1, channel B2 has a channel map value of 2." ::= { briIntEntry 5 } briIntIsdnChannelMap OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "A bit map of the channels in the BRI interface which are dedicated to ISDN. Channel B1 has channel map value of 1, channel B2 has a channel map value of 2." ::= { briIntEntry 6 } -- The BRI channel table. Each entry is a channel on a BRI interface. briChanTable OBJECT-TYPE SYNTAX SEQUENCE OF BriChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The table of channels on BRI interfaces." ::= { bri 2 } briChanEntry OBJECT-TYPE SYNTAX BriChanEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "A single entry in the BRI channels table." INDEX { briChanIntIndex, briChanChannelIndex } ::= { briChanTable 1 } BriChanEntry ::= SEQUENCE { briChanIntIndex INTEGER, briChanChannelIndex INTEGER, briChanMode INTEGER, briChanState INTEGER } briChanIntIndex OBJECT-TYPE SYNTAX INTEGER MAX-ACCESS read-only STATUS current DESCRIPTION "The ifIndex of the BRI interface." ::= { briChanEntry 1 } briChanChannelIndex OBJECT-TYPE SYNTAX INTEGER (1..3) MAX-ACCESS read-only STATUS current DESCRIPTION "The channel index of the BRI channel. Channel B1 has index 1, channel B2 has index 2 and the D channel has index 3." ::= { briChanEntry 2 } briChanMode OBJECT-TYPE SYNTAX INTEGER { isdn (1), tdm (2), none (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "The mode of this BRI channel. The value isdn means that the channel is reserved for use in ISDN calls. The value tdm means that the channel is reserved for use by TDM. For the D channel, this object will always have the value isdn." ::= { briChanEntry 3 } briChanState OBJECT-TYPE SYNTAX INTEGER { inactive (1), active (2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The state of this BRI channel. The value inactive means that the channel does not currently have an active user, either an ISDN call or an active TDM group. The value active means that the channel is in use, either by an ISDN call or an active TDM group. For the D channel, this object will have the value active if LAPD is using the D channel (either for call control or X.25), or the value inactive otherwise." ::= { briChanEntry 4 } END