-- *------------------------------------------------------------------ -- * ALTIGA-SESSION-STATS-MIB.my: Altiga Session Statistics MIB. -- * -- * Altiga Networks was acquired by Cisco Systems on March 29, 2000 -- * -- * Copyright (c) 2002, 2003, 2005 by Cisco Systems, Inc. -- * All rights reserved. -- * -- *------------------------------------------------------------------ ALTIGA-SESSION-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Unsigned32, Gauge32, TimeTicks FROM SNMPv2-SMI RowStatus, DisplayString, MacAddress, TEXTUAL-CONVENTION FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF alStatsSession, alSessionGroup FROM ALTIGA-MIB alSessionMibModule FROM ALTIGA-GLOBAL-REG; altigaSessionStatsMibModule MODULE-IDENTITY LAST-UPDATED "200501260000Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-cvpn3000@cisco.com" DESCRIPTION "The Altiga Session Statistics MIB models counters and objects that are of management interest for sessions. Acronyms The following acronyms are used in this document: MIB: Management Information Base ACS: Access Control Server " REVISION "200501260000Z" DESCRIPTION "Added NAC objects alActiveNacAcceptedSessions, alTotalNacAcceptedSessions. alActiveNacRejectedSessions, alTotalNacRejectedSessions. alActiveNacExemptedSessions, alTotalNacExemptedSessions. alActiveNacNonresponsiveSessions, alTotalNacNonresponsiveSessions. alActiveNacHoldoffSessions, alTotalNacHoldoffSessions. alActiveNacDisabledSessions, alTotalNacDisabledSessions. alActiveSessionNacResult, alActiveSessionSubEntryNacRevalTimer. alActiveSessionSubEntryNacTimetoReval, alActiveSessionSubEntryNacSqTimer. alActiveSessionSubEntryNacSessionAge, alActiveSessionSubEntryNacHoldTimer, alActiveSessionSubEntryNacPosture. alActiveSessionSubEntryNacRedirectUrl." REVISION "200309090000Z" DESCRIPTION "Added new enum value to SessionProtocol and EncryptionAlgorithm. Added alActiveSessionMaxWebVpnUsers and alWeightedSessionCount objects" REVISION "200303170000Z" DESCRIPTION "Added alActiveSessionFilterId object" REVISION "200209051300Z" DESCRIPTION "Added module compliance." REVISION "200207100000Z" DESCRIPTION "Updated with new header" ::= { alSessionMibModule 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- MIB Objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ alStatsSessionGlobal OBJECT IDENTIFIER ::= { alStatsSession 1 } SessionProtocol ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Session Protocol for Active Sessions. As noted in the comments below, some values will not be seen as a subentry, and others will not be seen as an entry. httpsTunnel - SSL Tunnel Client session" SYNTAX INTEGER { pptp(1), l2tp(2), ipsec(3), -- A subentry SA or Remote Access http(4), -- Not a subentry ftp(5), -- Not a subentry telnet(6), -- Not a subentry snmp(7), -- Not a subentry tftp(8), -- Not a subentry console(9), -- Not a subentry debugTelnet(10), -- Not a subentry debugConsole(11), -- Not a subentry other(12), ike(13), -- Not an entry l2tpOverIpSec(14), -- Not a subentry ipsecLanToLan(15), -- Not a subentry ipsecOverUdp(16), ssh(17), -- Not a subentry vcaLanToLan(18), ipsecOverTcp(19), pppoe(20), -- Not a subentry ipsecOverNatT(21), -- Not a subentry ipsecLan2LanOverNatT(22), -- Not a subentry l2tpOverIpsecOverNatT(23), userHttps(24), pop3s(25), imap4s(26), smtps(27), httpsTunnel(28) } EncryptionAlgorithm ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Encryption Algorithm for Active Sessions." SYNTAX INTEGER { none(1), des56(2), des40(3), des168(4), rc4Stateless40(5), rc4Statefull40(6), rc4Stateless128(7), rc4Statefull128(8), aes128(9), aes192(10), aes256(11), sslv3(64), sslv3des56(66), -- +64 sslv3des168(68), -- +64 sslv3rc4Statefull128(72), -- +64 tlsv1(128), tlsv1des56(130), -- +128 tlsv1des168(132), -- +128 tlsv1rc4Statefull128(136) -- +128 } CompressionAlgorithm ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "Compression Algorithm for Active Sessions." SYNTAX INTEGER { none(0), lzs(1), deflate(2), lz(3) -- MPPC } NacResult ::= TEXTUAL-CONVENTION STATUS current DESCRIPTION "NAC result for remote access IPsec sessions. unknown - Posture Validation (authentication of NAC credentials) result none. accepted - Access-Accept received from ACS. rejected - Access-Reject received from ACS. exempted - Exempted from Posture Validation. nonResponsive - No response to Posture Validation requests. notApplicable - NAC is disabled. holdoff - NAC session in Hold-off state." SYNTAX INTEGER { unknown(0), accepted(1), rejected(2), exempted(3), nonResponsive(4), notApplicable(5), holdoff(6) } alActiveSessionCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active sessions." ::= { alStatsSessionGlobal 1 } alTotalSessionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of sessions since the device booted." ::= { alStatsSessionGlobal 2 } alActiveSessionLastUpdate OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The last time the summary stats were updated." ::= { alStatsSessionGlobal 3 } alActiveSessionMaxUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of user sessions allowed." ::= { alStatsSessionGlobal 4 } alActiveSessionGroupIdLock OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group id lock for top 10 list." ::= { alStatsSessionGlobal 5 } alMaxSessionCount OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest number of sessions since the device booted." ::= { alStatsSessionGlobal 6 } alActiveLanToLanSessionCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active LAN-to-LAN sessions." ::= { alStatsSessionGlobal 7 } alActiveManagementSessionCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active management sessions." ::= { alStatsSessionGlobal 8 } alActiveRemoteAccessSessionCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active Remote Access sessions." ::= { alStatsSessionGlobal 9 } alActiveSessionMaxWebVpnUsers OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of WebVPN user sessions allowed." ::= { alStatsSessionGlobal 10 } alWeightedSessionCount OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The weighted number of sessions." ::= { alStatsSessionGlobal 11 } alActiveNacAcceptedSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active Access-Accepted NAC sessions." ::= { alStatsSessionGlobal 12 } alTotalNacAcceptedSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Access-Accepted NAC sessions since the device booted." ::= { alStatsSessionGlobal 13 } alActiveNacRejectedSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active Access-Rejected NAC sessions." ::= { alStatsSessionGlobal 14 } alTotalNacRejectedSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of Access-Rejected NAC sessions since the device booted." ::= { alStatsSessionGlobal 15 } alActiveNacExemptedSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active PV exempt NAC sessions." ::= { alStatsSessionGlobal 16 } alTotalNacExemptedSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of PV exempt NAC sessions since the device booted." ::= { alStatsSessionGlobal 17 } alActiveNacNonresponsiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active non-responsive NAC sessions." ::= { alStatsSessionGlobal 18 } alTotalNacNonresponsiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of non-responsive NAC sessions since the device booted." ::= { alStatsSessionGlobal 19 } alActiveNacDisabledSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of currently active sessions not subjected to NAC." ::= { alStatsSessionGlobal 20 } alTotalNacDisabledSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions not subjected to NAC since the device booted." ::= { alStatsSessionGlobal 21 } alActiveNacHoldoffSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions currently in Hold-off state." ::= { alStatsSessionGlobal 22 } alTotalNacHoldoffSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of sessions placed in Hold-off state since the device booted." ::= { alStatsSessionGlobal 23 } alActiveSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF AlActiveSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of active sessions." ::= { alStatsSession 2 } alActiveSessionEntry OBJECT-TYPE SYNTAX AlActiveSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alActiveSessionTable." INDEX { alActiveSessionIndex } ::= { alActiveSessionTable 1 } AlActiveSessionEntry ::= SEQUENCE { alActiveSessionRowStatus RowStatus, alActiveSessionIndex Integer32, alActiveSessionUserName DisplayString, alActiveSessionIpAddress IpAddress, alActiveSessionProtocol SessionProtocol, alActiveSessionEncrType EncryptionAlgorithm, alActiveSessionStartTime TimeTicks, alActiveSessionConnectTime Unsigned32, alActiveSessionOctetsSent Counter32, alActiveSessionOctetsRcvd Counter32, alActiveSessionSepId Integer32, alActiveSessionGroupName DisplayString, alActiveSessionGroupId Integer32, alActiveSessionPublicIpAddress IpAddress, alActiveSessionTopTenData Gauge32, alActiveSessionLoginTime Unsigned32, alActiveSessionOS DisplayString, alActiveSessionVersion DisplayString, alActiveSessionFilterId Integer32, alActiveSessionNacResult NacResult } alActiveSessionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. Used to terminate the session, cannot be used to create a session." ::= { alActiveSessionEntry 1 } alActiveSessionIndex OBJECT-TYPE SYNTAX Integer32(1..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of this session." ::= { alActiveSessionEntry 2 } alActiveSessionUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The username used to authenticate this session." ::= { alActiveSessionEntry 3 } alActiveSessionIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IP address of this session. For a Remote Access session, this is the assigned IP address. For LAN-to-LAN, this is the peer VPN device. For management, this is the IP address of the management machine." ::= { alActiveSessionEntry 4 } alActiveSessionProtocol OBJECT-TYPE SYNTAX SessionProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol used for this session." ::= { alActiveSessionEntry 5 } alActiveSessionEncrType OBJECT-TYPE SYNTAX EncryptionAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used on this session." ::= { alActiveSessionEntry 6 } alActiveSessionStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this session was established." ::= { alActiveSessionEntry 7 } alActiveSessionConnectTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of time, in seconds that this session has been established." ::= { alActiveSessionEntry 8 } alActiveSessionOctetsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted over this session." ::= { alActiveSessionEntry 9 } alActiveSessionOctetsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on this session." ::= { alActiveSessionEntry 10 } alActiveSessionSepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SEP module assigned to this session." ::= { alActiveSessionEntry 11 } alActiveSessionGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The groupname used to establish this session." ::= { alActiveSessionEntry 12 } alActiveSessionGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group id assigned to this session." ::= { alActiveSessionEntry 13 } alActiveSessionPublicIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The public peer IP address of this Remote Access session. Not used for administrative or LAN-to-LAN sessions." ::= { alActiveSessionEntry 14 } alActiveSessionTopTenData OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Placeholder for the data used to sort the top ten lists." ::= { alActiveSessionEntry 15 } alActiveSessionLoginTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "time_t value of the concentrator when the session started." ::= { alActiveSessionEntry 16 } alActiveSessionOS OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User operating system type." ::= { alActiveSessionEntry 17 } alActiveSessionVersion OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "User application version." ::= { alActiveSessionEntry 18 } alActiveSessionFilterId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The Filter ID applied to the user Session." ::= { alActiveSessionEntry 19 } alActiveSessionNacResult OBJECT-TYPE SYNTAX NacResult MAX-ACCESS read-only STATUS current DESCRIPTION "The NAC result for the remote access IPsec session for which the SessionProtocol is ipsec, l2tpOverIpsec, ipsecOverUdp, ipsecOverTcp, ipsecOverNatT or l2tpOverIpsecOverNatT." ::= { alActiveSessionEntry 20 } alActiveSessionThroughputTable OBJECT-TYPE SYNTAX SEQUENCE OF AlActiveSessionThroughputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Top ten list of throughput users." ::= { alStatsSession 3 } alActiveSessionThroughputEntry OBJECT-TYPE SYNTAX AlActiveSessionThroughputEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alActiveSessionThroughputTable." INDEX { alActiveSessionThroughputIndex } ::= { alActiveSessionThroughputTable 1 } AlActiveSessionThroughputEntry ::= SEQUENCE { alActiveSessionThroughputRowStatus RowStatus, alActiveSessionThroughputIndex Integer32, alActiveSessionThroughputUserName DisplayString, alActiveSessionThroughputIpAddress IpAddress, alActiveSessionThroughputProtocol SessionProtocol, alActiveSessionThroughputEncrType EncryptionAlgorithm, alActiveSessionThroughputStartTime TimeTicks, alActiveSessionThroughputConnectTime Counter32, alActiveSessionThroughputOctetsSent Counter32, alActiveSessionThroughputOctetsRcvd Counter32, alActiveSessionThroughputSepId Integer32, alActiveSessionThroughputGroupName DisplayString, alActiveSessionThroughputGroupId Integer32, alActiveSessionThroughputPublicIpAddress IpAddress, alActiveSessionThroughputTopTenData Gauge32, alActiveSessionThroughputLoginTime Unsigned32 } alActiveSessionThroughputRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this row." ::= { alActiveSessionThroughputEntry 1 } alActiveSessionThroughputIndex OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of this session." ::= { alActiveSessionThroughputEntry 2 } alActiveSessionThroughputUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The username used to authenticate this session." ::= { alActiveSessionThroughputEntry 3 } alActiveSessionThroughputIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IP address of this session." ::= { alActiveSessionThroughputEntry 4 } alActiveSessionThroughputProtocol OBJECT-TYPE SYNTAX SessionProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol used for this session." ::= { alActiveSessionThroughputEntry 5 } alActiveSessionThroughputEncrType OBJECT-TYPE SYNTAX EncryptionAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used on this session." ::= { alActiveSessionThroughputEntry 6 } alActiveSessionThroughputStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this session was established." ::= { alActiveSessionThroughputEntry 7 } alActiveSessionThroughputConnectTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of time, in seconds that this session has been established." ::= { alActiveSessionThroughputEntry 8 } alActiveSessionThroughputOctetsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted over this session." ::= { alActiveSessionThroughputEntry 9 } alActiveSessionThroughputOctetsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on this session." ::= { alActiveSessionThroughputEntry 10 } alActiveSessionThroughputSepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SEP module assigned to this session." ::= { alActiveSessionThroughputEntry 11 } alActiveSessionThroughputGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The groupname used to establish this session." ::= { alActiveSessionThroughputEntry 12 } alActiveSessionThroughputGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group id assigned to this session." ::= { alActiveSessionThroughputEntry 13 } alActiveSessionThroughputPublicIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The public peer IP address of this Remote Access session. Not used for administrative or LAN-to-LAN sessions." ::= { alActiveSessionThroughputEntry 14 } alActiveSessionThroughputTopTenData OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Placeholder for the data used to sort the top ten lists." ::= { alActiveSessionThroughputEntry 15 } alActiveSessionThroughputLoginTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "time_t value of the concentrator when the session started." ::= { alActiveSessionThroughputEntry 16 } alActiveSessionDataTable OBJECT-TYPE SYNTAX SEQUENCE OF AlActiveSessionDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Top ten list of data users." ::= { alStatsSession 4 } alActiveSessionDataEntry OBJECT-TYPE SYNTAX AlActiveSessionDataEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alActiveSessionDataTable." INDEX { alActiveSessionDataIndex } ::= { alActiveSessionDataTable 1 } AlActiveSessionDataEntry ::= SEQUENCE { alActiveSessionDataRowStatus RowStatus, alActiveSessionDataIndex Integer32, alActiveSessionDataUserName DisplayString, alActiveSessionDataIpAddress IpAddress, alActiveSessionDataProtocol SessionProtocol, alActiveSessionDataEncrType EncryptionAlgorithm, alActiveSessionDataStartTime TimeTicks, alActiveSessionDataConnectTime Counter32, alActiveSessionDataOctetsSent Counter32, alActiveSessionDataOctetsRcvd Counter32, alActiveSessionDataSepId Integer32, alActiveSessionDataGroupName DisplayString, alActiveSessionDataGroupId Integer32, alActiveSessionDataPublicIpAddress IpAddress, alActiveSessionDataTopTenData Gauge32, alActiveSessionDataLoginTime Unsigned32 } alActiveSessionDataRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this row." ::= { alActiveSessionDataEntry 1 } alActiveSessionDataIndex OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of this session." ::= { alActiveSessionDataEntry 2 } alActiveSessionDataUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The username used to authenticate this session." ::= { alActiveSessionDataEntry 3 } alActiveSessionDataIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IP address of this session." ::= { alActiveSessionDataEntry 4 } alActiveSessionDataProtocol OBJECT-TYPE SYNTAX SessionProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol used for this session." ::= { alActiveSessionDataEntry 5 } alActiveSessionDataEncrType OBJECT-TYPE SYNTAX EncryptionAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used on this session." ::= { alActiveSessionDataEntry 6 } alActiveSessionDataStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this session was established." ::= { alActiveSessionDataEntry 7 } alActiveSessionDataConnectTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of time, in seconds that this session has been established." ::= { alActiveSessionDataEntry 8 } alActiveSessionDataOctetsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted over this session." ::= { alActiveSessionDataEntry 9 } alActiveSessionDataOctetsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on this session." ::= { alActiveSessionDataEntry 10 } alActiveSessionDataSepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SEP module assigned to this session." ::= { alActiveSessionDataEntry 11 } alActiveSessionDataGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The groupname used to establish this session." ::= { alActiveSessionDataEntry 12 } alActiveSessionDataGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group id assigned to this session." ::= { alActiveSessionDataEntry 13 } alActiveSessionDataPublicIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The public peer IP address of this Remote Access session. Not used for administrative or LAN-to-LAN sessions." ::= { alActiveSessionDataEntry 14 } alActiveSessionDataTopTenData OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Placeholder for the data used to sort the top ten lists." ::= { alActiveSessionDataEntry 15 } alActiveSessionDataLoginTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "time_t value of the concentrator when the session started." ::= { alActiveSessionDataEntry 16 } alActiveSessionDurationTable OBJECT-TYPE SYNTAX SEQUENCE OF AlActiveSessionDurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "Top ten list of Duration users." ::= { alStatsSession 5 } alActiveSessionDurationEntry OBJECT-TYPE SYNTAX AlActiveSessionDurationEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alActiveSessionDurationTable." INDEX { alActiveSessionDurationIndex } ::= { alActiveSessionDurationTable 1 } AlActiveSessionDurationEntry ::= SEQUENCE { alActiveSessionDurationRowStatus RowStatus, alActiveSessionDurationIndex Integer32, alActiveSessionDurationUserName DisplayString, alActiveSessionDurationIpAddress IpAddress, alActiveSessionDurationProtocol SessionProtocol, alActiveSessionDurationEncrType EncryptionAlgorithm, alActiveSessionDurationStartTime TimeTicks, alActiveSessionDurationConnectTime Counter32, alActiveSessionDurationOctetsSent Counter32, alActiveSessionDurationOctetsRcvd Counter32, alActiveSessionDurationSepId Integer32, alActiveSessionDurationGroupName DisplayString, alActiveSessionDurationGroupId Integer32, alActiveSessionDurationPublicIpAddress IpAddress, alActiveSessionDurationTopTenData Gauge32, alActiveSessionDurationLoginTime Unsigned32 } alActiveSessionDurationRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this row." ::= { alActiveSessionDurationEntry 1 } alActiveSessionDurationIndex OBJECT-TYPE SYNTAX Integer32(1..10) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of this session." ::= { alActiveSessionDurationEntry 2 } alActiveSessionDurationUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The username used to authenticate this session." ::= { alActiveSessionDurationEntry 3 } alActiveSessionDurationIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer IP address of this session." ::= { alActiveSessionDurationEntry 4 } alActiveSessionDurationProtocol OBJECT-TYPE SYNTAX SessionProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol used for this session." ::= { alActiveSessionDurationEntry 5 } alActiveSessionDurationEncrType OBJECT-TYPE SYNTAX EncryptionAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used on this session." ::= { alActiveSessionDurationEntry 6 } alActiveSessionDurationStartTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The value of sysUpTime when this session was established." ::= { alActiveSessionDurationEntry 7 } alActiveSessionDurationConnectTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of time, in seconds that this session has been established." ::= { alActiveSessionDurationEntry 8 } alActiveSessionDurationOctetsSent OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets transmitted over this session." ::= { alActiveSessionDurationEntry 9 } alActiveSessionDurationOctetsRcvd OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total number of octets received on this session." ::= { alActiveSessionDurationEntry 10 } alActiveSessionDurationSepId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The SEP module assigned to this session." ::= { alActiveSessionDurationEntry 11 } alActiveSessionDurationGroupName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The groupname used to establish this session." ::= { alActiveSessionDurationEntry 12 } alActiveSessionDurationGroupId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The group id assigned to this session." ::= { alActiveSessionDurationEntry 13 } alActiveSessionDurationPublicIpAddress OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The public peer IP address of this Remote Access session. Not used for administrative or LAN-to-LAN sessions." ::= { alActiveSessionDurationEntry 14 } alActiveSessionDurationTopTenData OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "Placeholder for the data used to sort the top ten lists." ::= { alActiveSessionDurationEntry 15 } alActiveSessionDurationLoginTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "time_t value of the concentrator when the session started." ::= { alActiveSessionDurationEntry 16 } alActiveSessionSubTable OBJECT-TYPE SYNTAX SEQUENCE OF AlActiveSessionSubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of active session sub entries." ::= { alStatsSession 6 } alActiveSessionSubEntry OBJECT-TYPE SYNTAX AlActiveSessionSubEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alActiveSessionDurationTable." INDEX { alActiveSessionSubEntryIndex, alActiveSessionSubEntryInstance } ::= { alActiveSessionSubTable 1 } AlActiveSessionSubEntry ::= SEQUENCE { alActiveSessionSubEntryRowStatus RowStatus, alActiveSessionSubEntryIndex Integer32, alActiveSessionSubEntryInstance Integer32, alActiveSessionSubEntryProtocol SessionProtocol, alActiveSessionSubEntryEncrAlg EncryptionAlgorithm, alActiveSessionSubEntryHashAlg INTEGER, alActiveSessionSubEntryDiffHelmanGrp INTEGER, alActiveSessionSubEntryAuthMode INTEGER, alActiveSessionSubEntryEncapMode INTEGER, alActiveSessionSubEntryRekeyTime Unsigned32, alActiveSessionSubEntryRekeyKBytes Unsigned32, alActiveSessionSubEntryRemAddrType INTEGER, alActiveSessionSubEntryRemAddr1 IpAddress, alActiveSessionSubEntryRemAddr2 IpAddress, alActiveSessionSubEntryLocAddrType INTEGER, alActiveSessionSubEntryLocAddr1 IpAddress, alActiveSessionSubEntryLocAddr2 IpAddress, alActiveSessionSubEntryRcvdOctets Counter32, alActiveSessionSubEntrySentOctets Counter32, alActiveSessionSubEntrySep Integer32, alActiveSessionSubEntryUserName DisplayString, alActiveSessionSubEntryClientIpAddr IpAddress, alActiveSessionSubEntryUdpPort Integer32, alActiveSessionSubEntryTotalIdleTime Counter32, alActiveSessionSubEntryIkeNegMode INTEGER, alActiveSessionSubEntryCompression CompressionAlgorithm, alActiveSessionSubEntryInstId Integer32, alActiveSessionSubEntryPfsGroup INTEGER, alActiveSessionSubEntryTcpSrcPort Integer32, alActiveSessionSubEntryTcpDstPort Integer32, alActiveSessionSubEntryUdpSrcPort Integer32, alActiveSessionSubEntryIkeUdpSrcPort Integer32, alActiveSessionSubEntryIkeUdpDstPort Integer32, alActiveSessionSubEntryNacRevalTimer Integer32, alActiveSessionSubEntryNacTimetoReval Integer32, alActiveSessionSubEntryNacSqTimer Integer32, alActiveSessionSubEntryNacSessionAge Integer32, alActiveSessionSubEntryNacPosture DisplayString, alActiveSessionSubEntryNacRedirectUrl DisplayString, alActiveSessionSubEntryNacHoldTimer Integer32 } alActiveSessionSubEntryRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-only STATUS current DESCRIPTION "The status of this row." ::= { alActiveSessionSubEntry 1 } alActiveSessionSubEntryIndex OBJECT-TYPE SYNTAX Integer32(1..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Index to the session of this session sub-entry." ::= { alActiveSessionSubEntry 2 } alActiveSessionSubEntryInstance OBJECT-TYPE SYNTAX Integer32(1..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Instance of this session sub-entry." ::= { alActiveSessionSubEntry 3 } alActiveSessionSubEntryProtocol OBJECT-TYPE SYNTAX SessionProtocol MAX-ACCESS read-only STATUS current DESCRIPTION "The protocol used for this session." ::= { alActiveSessionSubEntry 4 } alActiveSessionSubEntryEncrAlg OBJECT-TYPE SYNTAX EncryptionAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "The encryption algorithm used on this session sub-entry." ::= { alActiveSessionSubEntry 5 } alActiveSessionSubEntryHashAlg OBJECT-TYPE SYNTAX INTEGER { none(0), md5(1), sha1(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "The Hashing algorithm used on this session sub-entry." ::= { alActiveSessionSubEntry 6 } alActiveSessionSubEntryDiffHelmanGrp OBJECT-TYPE SYNTAX INTEGER { none(0), group1(1), group2(2), group3(3), group4(4), group5(5), group7(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Diffie Helman Group used on this session sub-entry. rsaCertHybrid - RSA Cert Hybrid dsaCertHybrid - DSA Cert Hybrid crack - Challenge/Resp Auth " ::= { alActiveSessionSubEntry 7 } alActiveSessionSubEntryAuthMode OBJECT-TYPE SYNTAX INTEGER { none(0), preSharedKeys(1), rsaCert(2), dsaCert(3), pap(4), chap(5), eapMd5(6), eapGtc(7), msChapV1(8), msChapV2(9), preSharedKeysXauth(10), rsaCertXauth(11), dsaCertXauth(12), eap(13), usernamePassword(14), rsaCertHybrid(15), dsaCertHybrid(16), crack(17) } MAX-ACCESS read-only STATUS current DESCRIPTION "Authentication Mode used on this session sub-entry" ::= { alActiveSessionSubEntry 8 } alActiveSessionSubEntryEncapMode OBJECT-TYPE SYNTAX INTEGER { none(0), transport(1), tunnel(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "Encapsulation Mode used on this session sub-entry." ::= { alActiveSessionSubEntry 9 } alActiveSessionSubEntryRekeyTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Rekey time interval for this session sub-entry." ::= { alActiveSessionSubEntry 10 } alActiveSessionSubEntryRekeyKBytes OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of kilobytes." ::= { alActiveSessionSubEntry 11 } alActiveSessionSubEntryRemAddrType OBJECT-TYPE SYNTAX INTEGER { none(0), addrWithSubNet(1), range(2), hostAddress(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Address or Address Range for this session sub-entry." ::= { alActiveSessionSubEntry 12 } alActiveSessionSubEntryRemAddr1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ip address or start address for this session sub-entry." ::= { alActiveSessionSubEntry 13 } alActiveSessionSubEntryRemAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet or end address for this session sub-entry." ::= { alActiveSessionSubEntry 14 } alActiveSessionSubEntryLocAddrType OBJECT-TYPE SYNTAX INTEGER { none(0), addrWithSubNet(1), range(2), hostAddress(3) } MAX-ACCESS read-only STATUS current DESCRIPTION "Address or Address Range for this session sub-entry." ::= { alActiveSessionSubEntry 15 } alActiveSessionSubEntryLocAddr1 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Ip address or start address for this session sub-entry." ::= { alActiveSessionSubEntry 16 } alActiveSessionSubEntryLocAddr2 OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Subnet or end address for this session sub-entry." ::= { alActiveSessionSubEntry 17 } alActiveSessionSubEntryRcvdOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets received for this session sub-entry." ::= { alActiveSessionSubEntry 18 } alActiveSessionSubEntrySentOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "Number of octets sent for this session sub-entry." ::= { alActiveSessionSubEntry 19 } alActiveSessionSubEntrySep OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "SEP used for thios session sub-entry." ::= { alActiveSessionSubEntry 20 } alActiveSessionSubEntryUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The username used to authenticate this session sub entry." ::= { alActiveSessionSubEntry 21 } alActiveSessionSubEntryClientIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "Remote client assigned IP address for this session sub-entry." ::= { alActiveSessionSubEntry 22 } alActiveSessionSubEntryUdpPort OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP destination port used by IPSec for this connection to permit access through a firewall." ::= { alActiveSessionSubEntry 23 } alActiveSessionSubEntryTotalIdleTime OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of time, in seconds that this session has been idle." ::= { alActiveSessionSubEntry 24 } alActiveSessionSubEntryIkeNegMode OBJECT-TYPE SYNTAX INTEGER { none(0), main(1), aggressive(2) } MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Negotiation mode used on this session sub-entry." ::= { alActiveSessionSubEntry 25 } alActiveSessionSubEntryCompression OBJECT-TYPE SYNTAX CompressionAlgorithm MAX-ACCESS read-only STATUS current DESCRIPTION "IKE Negotiation mode used on this session sub-entry." ::= { alActiveSessionSubEntry 26 } alActiveSessionSubEntryInstId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "Instance Identifier allocated by RM for this session sub-entry." ::= {alActiveSessionSubEntry 27 } alActiveSessionSubEntryPfsGroup OBJECT-TYPE SYNTAX INTEGER { none(0), group1(1), group2(2), group3(3), group4(4), group7(7) } MAX-ACCESS read-only STATUS current DESCRIPTION "Perfect Forward Secrecy Group used on this session sub-entry." ::= { alActiveSessionSubEntry 28 } alActiveSessionSubEntryTcpSrcPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP Source port used by IKE/IPSec for this connection to permit access through a firewall." ::= { alActiveSessionSubEntry 29 } alActiveSessionSubEntryTcpDstPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The TCP Dest port used by IKE/IPSec for this connection to permit access through a firewall." ::= { alActiveSessionSubEntry 30 } alActiveSessionSubEntryUdpSrcPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP Source port used by IPSec for this connection to permit access through a firewall." ::= { alActiveSessionSubEntry 31 } alActiveSessionSubEntryIkeUdpSrcPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP Source port used by IPSec/UDP for IKE Session." ::= { alActiveSessionSubEntry 32 } alActiveSessionSubEntryIkeUdpDstPort OBJECT-TYPE SYNTAX Integer32(0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The UDP Source port used by IPSec/UDP for IKE Session." ::= { alActiveSessionSubEntry 33 } alActiveSessionSubEntryNacRevalTimer OBJECT-TYPE SYNTAX Integer32(0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "NAC Re-validation Timer. Periodic interval after IPsec session establishment and initial posture validation, at which the host is subject to a full posture validation." ::= { alActiveSessionSubEntry 34 } alActiveSessionSubEntryNacTimetoReval OBJECT-TYPE SYNTAX Integer32(0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time after which the NAC session will be re-validated. This is the number of seconds before the NAC Revalidation Timer expires." ::= { alActiveSessionSubEntry 35 } alActiveSessionSubEntryNacSqTimer OBJECT-TYPE SYNTAX Integer32(0..1800) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "NAC Status Query Timer. Periodic interval after IPsec session establishment and initial posture validation, at which the host is queried for changes in its posture." ::= { alActiveSessionSubEntry 36 } alActiveSessionSubEntryNacSessionAge OBJECT-TYPE SYNTAX Integer32(0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "NAC EAPoUDP session age. The total time in seconds for which the EAPoUDP association exists." ::= { alActiveSessionSubEntry 37 } alActiveSessionSubEntryNacPosture OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Posture-token for the NAC session." ::= { alActiveSessionSubEntry 38 } alActiveSessionSubEntryNacRedirectUrl OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "Re-direct URL for the NAC session." ::= { alActiveSessionSubEntry 39} alActiveSessionSubEntryNacHoldTimer OBJECT-TYPE SYNTAX Integer32(0..86400) UNITS "seconds" MAX-ACCESS read-only STATUS current DESCRIPTION "Time after which the NAC PV will be retried." ::= { alActiveSessionSubEntry 40 } alActiveHWClientUserTable OBJECT-TYPE SYNTAX SEQUENCE OF AlActiveHWClientUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of active hardware client sessions" ::= { alStatsSession 7 } alActiveHWClientUserEntry OBJECT-TYPE SYNTAX AlActiveHWClientUserEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alActiveSessionTable." INDEX { alActiveHWClientUserSessionIndex, alActiveHWClientUserIpAddr } ::= { alActiveHWClientUserTable 1 } AlActiveHWClientUserEntry ::= SEQUENCE { alActiveHWClientUserRowStatus RowStatus, alActiveHWClientUserSessionIndex Integer32, alActiveHWClientUserIpAddr IpAddress, alActiveHWClientUserName DisplayString, alActiveHWClientUserMacAddr MacAddress, alActiveHWClientUserLoginTime Unsigned32, alActiveHWClientUserUpTime TimeTicks } alActiveHWClientUserRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. Used to terminate the HW Client user session, cannot be used to create a session." ::= { alActiveHWClientUserEntry 1 } alActiveHWClientUserSessionIndex OBJECT-TYPE SYNTAX Integer32(1..10000) MAX-ACCESS read-only STATUS current DESCRIPTION "Index of this HW Client User session." ::= { alActiveHWClientUserEntry 2 } alActiveHWClientUserIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The IP address of this HW Client user." ::= { alActiveHWClientUserEntry 3 } alActiveHWClientUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The username used to authenticate this HW Client user session." ::= { alActiveHWClientUserEntry 4 } alActiveHWClientUserMacAddr OBJECT-TYPE SYNTAX MacAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The MAC address for a HW Client User session." ::= { alActiveHWClientUserEntry 5 } alActiveHWClientUserLoginTime OBJECT-TYPE SYNTAX Unsigned32 MAX-ACCESS read-only STATUS current DESCRIPTION "time_t value of the concentrator when the session started." ::= { alActiveHWClientUserEntry 6 } alActiveHWClientUserUpTime OBJECT-TYPE SYNTAX TimeTicks MAX-ACCESS read-only STATUS current DESCRIPTION "The total amount of time, in seconds that this HW Client User session has been established." ::= { alActiveHWClientUserEntry 7 } altigaSessionStatsMibConformance OBJECT IDENTIFIER ::= { altigaSessionStatsMibModule 1 } altigaSessionStatsMibCompliances OBJECT IDENTIFIER ::= { altigaSessionStatsMibConformance 1 } altigaSessionStatsMibCompliance MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for agents which implement the Altiga Session Statistics MIB." MODULE MANDATORY-GROUPS { altigaSessionStatsGroup } ::= { altigaSessionStatsMibCompliances 1 } altigaSessionStatsMibComplianceRev1 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for agents which implement the Altiga Session Statistics MIB." MODULE MANDATORY-GROUPS { altigaSessionStatsGroupRev1 } ::= { altigaSessionStatsMibCompliances 2 } altigaSessionStatsMibComplianceRev2 MODULE-COMPLIANCE STATUS deprecated DESCRIPTION "The compliance statement for agents which implement the Altiga Session Statistics MIB." MODULE MANDATORY-GROUPS { altigaSessionStatsGroupRev2 } ::= { altigaSessionStatsMibCompliances 3 } altigaSessionStatsMibComplianceRev3 MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents which implement the Altiga Session Statistics MIB." MODULE MANDATORY-GROUPS { altigaSessionStatsGroupRev2, altigaSessionStatsGroupRev2Sup1 } ::= { altigaSessionStatsMibCompliances 4 } altigaSessionStatsGroup OBJECT-GROUP OBJECTS { alActiveSessionCount, alTotalSessionCount, alActiveSessionLastUpdate, alActiveSessionMaxUsers, alActiveSessionGroupIdLock, alMaxSessionCount, alActiveLanToLanSessionCount, alActiveManagementSessionCount, alActiveRemoteAccessSessionCount, alActiveSessionRowStatus, alActiveSessionIndex, alActiveSessionUserName, alActiveSessionIpAddress, alActiveSessionProtocol, alActiveSessionEncrType, alActiveSessionStartTime, alActiveSessionConnectTime, alActiveSessionOctetsSent, alActiveSessionOctetsRcvd, alActiveSessionSepId, alActiveSessionGroupName, alActiveSessionGroupId, alActiveSessionPublicIpAddress, alActiveSessionTopTenData, alActiveSessionLoginTime, alActiveSessionOS, alActiveSessionVersion, alActiveSessionThroughputRowStatus, alActiveSessionThroughputIndex, alActiveSessionThroughputUserName, alActiveSessionThroughputIpAddress, alActiveSessionThroughputProtocol, alActiveSessionThroughputEncrType, alActiveSessionThroughputStartTime, alActiveSessionThroughputConnectTime, alActiveSessionThroughputOctetsSent, alActiveSessionThroughputOctetsRcvd, alActiveSessionThroughputSepId, alActiveSessionThroughputGroupName, alActiveSessionThroughputGroupId, alActiveSessionThroughputPublicIpAddress, alActiveSessionThroughputTopTenData, alActiveSessionThroughputLoginTime, alActiveSessionDataRowStatus, alActiveSessionDataIndex, alActiveSessionDataUserName, alActiveSessionDataIpAddress, alActiveSessionDataProtocol, alActiveSessionDataEncrType, alActiveSessionDataStartTime, alActiveSessionDataConnectTime, alActiveSessionDataOctetsSent, alActiveSessionDataOctetsRcvd, alActiveSessionDataSepId, alActiveSessionDataGroupName, alActiveSessionDataGroupId, alActiveSessionDataPublicIpAddress, alActiveSessionDataTopTenData, alActiveSessionDataLoginTime, alActiveSessionDurationRowStatus, alActiveSessionDurationIndex, alActiveSessionDurationUserName, alActiveSessionDurationIpAddress, alActiveSessionDurationProtocol, alActiveSessionDurationEncrType, alActiveSessionDurationStartTime, alActiveSessionDurationConnectTime, alActiveSessionDurationOctetsSent, alActiveSessionDurationOctetsRcvd, alActiveSessionDurationSepId, alActiveSessionDurationGroupName, alActiveSessionDurationGroupId, alActiveSessionDurationPublicIpAddress, alActiveSessionDurationTopTenData, alActiveSessionDurationLoginTime, alActiveSessionSubEntryRowStatus, alActiveSessionSubEntryIndex, alActiveSessionSubEntryInstance, alActiveSessionSubEntryProtocol, alActiveSessionSubEntryEncrAlg, alActiveSessionSubEntryHashAlg, alActiveSessionSubEntryDiffHelmanGrp, alActiveSessionSubEntryAuthMode, alActiveSessionSubEntryEncapMode, alActiveSessionSubEntryRekeyTime, alActiveSessionSubEntryRekeyKBytes, alActiveSessionSubEntryRemAddrType, alActiveSessionSubEntryRemAddr1, alActiveSessionSubEntryRemAddr2, alActiveSessionSubEntryLocAddrType, alActiveSessionSubEntryLocAddr1, alActiveSessionSubEntryLocAddr2, alActiveSessionSubEntryRcvdOctets, alActiveSessionSubEntrySentOctets, alActiveSessionSubEntrySep, alActiveSessionSubEntryUserName, alActiveSessionSubEntryClientIpAddr, alActiveSessionSubEntryUdpPort, alActiveSessionSubEntryTotalIdleTime, alActiveSessionSubEntryIkeNegMode, alActiveSessionSubEntryCompression, alActiveSessionSubEntryInstId, alActiveSessionSubEntryPfsGroup, alActiveSessionSubEntryTcpSrcPort, alActiveSessionSubEntryTcpDstPort, alActiveSessionSubEntryUdpSrcPort, alActiveSessionSubEntryIkeUdpSrcPort, alActiveSessionSubEntryIkeUdpDstPort, alActiveHWClientUserRowStatus, alActiveHWClientUserSessionIndex, alActiveHWClientUserName, alActiveHWClientUserIpAddr, alActiveHWClientUserMacAddr, alActiveHWClientUserLoginTime, alActiveHWClientUserUpTime } STATUS deprecated DESCRIPTION "The objects for Session statistics." ::= { alSessionGroup 2 } altigaSessionStatsGroupRev1 OBJECT-GROUP OBJECTS { alActiveSessionCount, alTotalSessionCount, alActiveSessionLastUpdate, alActiveSessionMaxUsers, alActiveSessionGroupIdLock, alMaxSessionCount, alActiveLanToLanSessionCount, alActiveManagementSessionCount, alActiveRemoteAccessSessionCount, alActiveSessionRowStatus, alActiveSessionIndex, alActiveSessionUserName, alActiveSessionIpAddress, alActiveSessionProtocol, alActiveSessionEncrType, alActiveSessionStartTime, alActiveSessionConnectTime, alActiveSessionOctetsSent, alActiveSessionOctetsRcvd, alActiveSessionSepId, alActiveSessionGroupName, alActiveSessionGroupId, alActiveSessionPublicIpAddress, alActiveSessionTopTenData, alActiveSessionLoginTime, alActiveSessionOS, alActiveSessionVersion, alActiveSessionFilterId, alActiveSessionThroughputRowStatus, alActiveSessionThroughputIndex, alActiveSessionThroughputUserName, alActiveSessionThroughputIpAddress, alActiveSessionThroughputProtocol, alActiveSessionThroughputEncrType, alActiveSessionThroughputStartTime, alActiveSessionThroughputConnectTime, alActiveSessionThroughputOctetsSent, alActiveSessionThroughputOctetsRcvd, alActiveSessionThroughputSepId, alActiveSessionThroughputGroupName, alActiveSessionThroughputGroupId, alActiveSessionThroughputPublicIpAddress, alActiveSessionThroughputTopTenData, alActiveSessionThroughputLoginTime, alActiveSessionDataRowStatus, alActiveSessionDataIndex, alActiveSessionDataUserName, alActiveSessionDataIpAddress, alActiveSessionDataProtocol, alActiveSessionDataEncrType, alActiveSessionDataStartTime, alActiveSessionDataConnectTime, alActiveSessionDataOctetsSent, alActiveSessionDataOctetsRcvd, alActiveSessionDataSepId, alActiveSessionDataGroupName, alActiveSessionDataGroupId, alActiveSessionDataPublicIpAddress, alActiveSessionDataTopTenData, alActiveSessionDataLoginTime, alActiveSessionDurationRowStatus, alActiveSessionDurationIndex, alActiveSessionDurationUserName, alActiveSessionDurationIpAddress, alActiveSessionDurationProtocol, alActiveSessionDurationEncrType, alActiveSessionDurationStartTime, alActiveSessionDurationConnectTime, alActiveSessionDurationOctetsSent, alActiveSessionDurationOctetsRcvd, alActiveSessionDurationSepId, alActiveSessionDurationGroupName, alActiveSessionDurationGroupId, alActiveSessionDurationPublicIpAddress, alActiveSessionDurationTopTenData, alActiveSessionDurationLoginTime, alActiveSessionSubEntryRowStatus, alActiveSessionSubEntryIndex, alActiveSessionSubEntryInstance, alActiveSessionSubEntryProtocol, alActiveSessionSubEntryEncrAlg, alActiveSessionSubEntryHashAlg, alActiveSessionSubEntryDiffHelmanGrp, alActiveSessionSubEntryAuthMode, alActiveSessionSubEntryEncapMode, alActiveSessionSubEntryRekeyTime, alActiveSessionSubEntryRekeyKBytes, alActiveSessionSubEntryRemAddrType, alActiveSessionSubEntryRemAddr1, alActiveSessionSubEntryRemAddr2, alActiveSessionSubEntryLocAddrType, alActiveSessionSubEntryLocAddr1, alActiveSessionSubEntryLocAddr2, alActiveSessionSubEntryRcvdOctets, alActiveSessionSubEntrySentOctets, alActiveSessionSubEntrySep, alActiveSessionSubEntryUserName, alActiveSessionSubEntryClientIpAddr, alActiveSessionSubEntryUdpPort, alActiveSessionSubEntryTotalIdleTime, alActiveSessionSubEntryIkeNegMode, alActiveSessionSubEntryCompression, alActiveSessionSubEntryInstId, alActiveSessionSubEntryPfsGroup, alActiveSessionSubEntryTcpSrcPort, alActiveSessionSubEntryTcpDstPort, alActiveSessionSubEntryUdpSrcPort, alActiveSessionSubEntryIkeUdpSrcPort, alActiveSessionSubEntryIkeUdpDstPort, alActiveHWClientUserRowStatus, alActiveHWClientUserSessionIndex, alActiveHWClientUserName, alActiveHWClientUserIpAddr, alActiveHWClientUserMacAddr, alActiveHWClientUserLoginTime, alActiveHWClientUserUpTime } STATUS deprecated DESCRIPTION "The objects for Session statistics." ::= { alSessionGroup 3 } altigaSessionStatsGroupRev2 OBJECT-GROUP OBJECTS { alActiveSessionCount, alTotalSessionCount, alActiveSessionLastUpdate, alActiveSessionMaxUsers, alActiveSessionGroupIdLock, alMaxSessionCount, alActiveLanToLanSessionCount, alActiveManagementSessionCount, alActiveRemoteAccessSessionCount, alActiveSessionRowStatus, alActiveSessionIndex, alActiveSessionUserName, alActiveSessionIpAddress, alActiveSessionProtocol, alActiveSessionEncrType, alActiveSessionStartTime, alActiveSessionConnectTime, alActiveSessionOctetsSent, alActiveSessionOctetsRcvd, alActiveSessionSepId, alActiveSessionGroupName, alActiveSessionGroupId, alActiveSessionPublicIpAddress, alActiveSessionTopTenData, alActiveSessionLoginTime, alActiveSessionOS, alActiveSessionVersion, alActiveSessionFilterId, alActiveSessionThroughputRowStatus, alActiveSessionThroughputIndex, alActiveSessionThroughputUserName, alActiveSessionThroughputIpAddress, alActiveSessionThroughputProtocol, alActiveSessionThroughputEncrType, alActiveSessionThroughputStartTime, alActiveSessionThroughputConnectTime, alActiveSessionThroughputOctetsSent, alActiveSessionThroughputOctetsRcvd, alActiveSessionThroughputSepId, alActiveSessionThroughputGroupName, alActiveSessionThroughputGroupId, alActiveSessionThroughputPublicIpAddress, alActiveSessionThroughputTopTenData, alActiveSessionThroughputLoginTime, alActiveSessionDataRowStatus, alActiveSessionDataIndex, alActiveSessionDataUserName, alActiveSessionDataIpAddress, alActiveSessionDataProtocol, alActiveSessionDataEncrType, alActiveSessionDataStartTime, alActiveSessionDataConnectTime, alActiveSessionDataOctetsSent, alActiveSessionDataOctetsRcvd, alActiveSessionDataSepId, alActiveSessionDataGroupName, alActiveSessionDataGroupId, alActiveSessionDataPublicIpAddress, alActiveSessionDataTopTenData, alActiveSessionDataLoginTime, alActiveSessionDurationRowStatus, alActiveSessionDurationIndex, alActiveSessionDurationUserName, alActiveSessionDurationIpAddress, alActiveSessionDurationProtocol, alActiveSessionDurationEncrType, alActiveSessionDurationStartTime, alActiveSessionDurationConnectTime, alActiveSessionDurationOctetsSent, alActiveSessionDurationOctetsRcvd, alActiveSessionDurationSepId, alActiveSessionDurationGroupName, alActiveSessionDurationGroupId, alActiveSessionDurationPublicIpAddress, alActiveSessionDurationTopTenData, alActiveSessionDurationLoginTime, alActiveSessionSubEntryRowStatus, alActiveSessionSubEntryIndex, alActiveSessionSubEntryInstance, alActiveSessionSubEntryProtocol, alActiveSessionSubEntryEncrAlg, alActiveSessionSubEntryHashAlg, alActiveSessionSubEntryDiffHelmanGrp, alActiveSessionSubEntryAuthMode, alActiveSessionSubEntryEncapMode, alActiveSessionSubEntryRekeyTime, alActiveSessionSubEntryRekeyKBytes, alActiveSessionSubEntryRemAddrType, alActiveSessionSubEntryRemAddr1, alActiveSessionSubEntryRemAddr2, alActiveSessionSubEntryLocAddrType, alActiveSessionSubEntryLocAddr1, alActiveSessionSubEntryLocAddr2, alActiveSessionSubEntryRcvdOctets, alActiveSessionSubEntrySentOctets, alActiveSessionSubEntrySep, alActiveSessionSubEntryUserName, alActiveSessionSubEntryClientIpAddr, alActiveSessionSubEntryUdpPort, alActiveSessionSubEntryTotalIdleTime, alActiveSessionSubEntryIkeNegMode, alActiveSessionSubEntryCompression, alActiveSessionSubEntryInstId, alActiveSessionSubEntryPfsGroup, alActiveSessionSubEntryTcpSrcPort, alActiveSessionSubEntryTcpDstPort, alActiveSessionSubEntryUdpSrcPort, alActiveSessionSubEntryIkeUdpSrcPort, alActiveSessionSubEntryIkeUdpDstPort, alActiveHWClientUserRowStatus, alActiveHWClientUserSessionIndex, alActiveHWClientUserName, alActiveHWClientUserIpAddr, alActiveHWClientUserMacAddr, alActiveHWClientUserLoginTime, alActiveHWClientUserUpTime, alActiveSessionMaxWebVpnUsers, alWeightedSessionCount } STATUS current DESCRIPTION "The objects for Session statistics." ::= { alSessionGroup 4 } altigaSessionStatsGroupRev2Sup1 OBJECT-GROUP OBJECTS { alActiveSessionNacResult, alActiveSessionSubEntryNacRevalTimer, alActiveSessionSubEntryNacTimetoReval, alActiveSessionSubEntryNacSqTimer, alActiveSessionSubEntryNacSessionAge, alActiveSessionSubEntryNacPosture, alActiveSessionSubEntryNacRedirectUrl, alActiveSessionSubEntryNacHoldTimer, alActiveNacAcceptedSessions, alTotalNacAcceptedSessions, alActiveNacRejectedSessions, alTotalNacRejectedSessions, alActiveNacExemptedSessions, alTotalNacExemptedSessions, alActiveNacNonresponsiveSessions, alTotalNacNonresponsiveSessions, alActiveNacDisabledSessions, alTotalNacDisabledSessions, alActiveNacHoldoffSessions, alTotalNacHoldoffSessions } STATUS current DESCRIPTION "The objects for Session statistics." ::= { alSessionGroup 5 } END