-- *------------------------------------------------------------------ -- * ALTIGA-PPTP-STATS-MIB.my: Altiga PPTP Statistics MIB. -- * -- * Altiga Networks was acquired by Cisco Systems on March 29, 2000 -- * -- * Copyright (c) 2002 by Cisco Systems, Inc. -- * All rights reserved. -- * -- *------------------------------------------------------------------ ALTIGA-PPTP-STATS-MIB DEFINITIONS ::= BEGIN IMPORTS MODULE-IDENTITY, OBJECT-TYPE, Integer32, IpAddress, Counter32, Gauge32 FROM SNMPv2-SMI RowStatus, DisplayString, TruthValue FROM SNMPv2-TC OBJECT-GROUP, MODULE-COMPLIANCE FROM SNMPv2-CONF alStatsPptp, alPptpGroup FROM ALTIGA-MIB alPptpMibModule FROM ALTIGA-GLOBAL-REG; altigaPptpStatsMibModule MODULE-IDENTITY LAST-UPDATED "200209051300Z" ORGANIZATION "Cisco Systems, Inc." CONTACT-INFO "Cisco Systems 170 W Tasman Drive San Jose, CA 95134 USA Tel: +1 800 553-NETS E-mail: cs-cvpn3000@cisco.com" DESCRIPTION "The Altiga PPTP Statistics MIB models counters and objects that are of management interest for PPTP tunnels. Acronyms The following acronyms are used in this document: MIB: Management Information Base PPTP: Point-to-Point Tunneling Protocol " REVISION "200209051300Z" DESCRIPTION "Added module compliance." REVISION "200207100000Z" DESCRIPTION "Updated with new header" ::= { alPptpMibModule 2 } -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ -- MIB Objects -- +++++++++++++++++++++++++++++++++++++++++++++++++++++++ alStatsPptpGlobal OBJECT IDENTIFIER ::= { alStatsPptp 1 } alPptpStatsLocalProtVers OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the protocol version and revision of the local implementation. The first octet contains the protocol version. The second octet contains the protocol revision." ::= { alStatsPptpGlobal 1 } alPptpStatsLocalFraming OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "A set of bits indicating the PPTP framing capabilities of this system." ::= { alStatsPptpGlobal 2 } alPptpStatsLocalBearer OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "A set of bits indicating the PPTP bearer capabilities of this system." ::= { alStatsPptpGlobal 3 } alPptpStatsLocalFirmwareRev OBJECT-TYPE SYNTAX OCTET STRING(SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object defines the local firmware revision." ::= { alStatsPptpGlobal 4 } alPptpStatsTotalTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of tunnels, including those that did not reach the established state." ::= { alStatsPptpGlobal 5 } alPptpStatsActiveTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of tunnels that are currently active." ::= { alStatsPptpGlobal 6 } alPptpStatsMaxTunnels OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of simultaneously active PPTP tunnels since the system was booted." ::= { alStatsPptpGlobal 7 } alPptpStatsTotalSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of sessions, including those that did not reach the established state." ::= { alStatsPptpGlobal 8 } alPptpStatsActiveSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of sessions that are currently active." ::= { alStatsPptpGlobal 9 } alPptpStatsMaxSessions OBJECT-TYPE SYNTAX Gauge32 MAX-ACCESS read-only STATUS current DESCRIPTION "The maximum number of simultaneously active PPTP sessions since the system was booted." ::= { alStatsPptpGlobal 10 } alPptpStatsControlRecvOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of control channel octets received." ::= { alStatsPptpGlobal 11 } alPptpStatsControlRecvPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of control packets received." ::= { alStatsPptpGlobal 12 } alPptpStatsControlRecvDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of control packets received that were discarded." ::= { alStatsPptpGlobal 13 } alPptpStatsControlSendOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of control channel octets that were transmitted to tunnel endpoints." ::= { alStatsPptpGlobal 14 } alPptpStatsControlSendPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of control packets that were transmitted to tunnel endpoints." ::= { alStatsPptpGlobal 15 } alPptpStatsPayloadRecvOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of payload channel octets that were received." ::= { alStatsPptpGlobal 16 } alPptpStatsPayloadRecvPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of payload packets that were received." ::= { alStatsPptpGlobal 17 } alPptpStatsPayloadRecvDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of received payload packets that were discarded." ::= { alStatsPptpGlobal 18 } alPptpStatsPayloadSendOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of payload channel octets that were transmitted to tunnel peers." ::= { alStatsPptpGlobal 19 } alPptpStatsPayloadSendPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the number of payload packets that were transmitted to tunnel peers." ::= { alStatsPptpGlobal 20 } alPptpStatsTunnelTable OBJECT-TYPE SYNTAX SEQUENCE OF AlPptpStatsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "The PPTP tunnel status and statistics table." ::= { alStatsPptp 2 } alPptpStatsTunnelEntry OBJECT-TYPE SYNTAX AlPptpStatsTunnelEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alPptpStatsTunnelTable." INDEX { alPptpStatsTunnelPeerIpAddr } ::= { alPptpStatsTunnelTable 1 } AlPptpStatsTunnelEntry ::= SEQUENCE { alPptpStatsTunnelRowStatus RowStatus, alPptpStatsTunnelPeerIpAddr IpAddress, alPptpStatsTunnelDatastreamId Integer32, alPptpStatsTunnelLocalIpAddr IpAddress, alPptpStatsTunnelPeerHostName DisplayString, alPptpStatsTunnelPeerVendorName DisplayString, alPptpStatsTunnelPeerFirmwareRev OCTET STRING, alPptpStatsTunnelPeerProtVers OCTET STRING, alPptpStatsTunnelPeerFramingCap Integer32, alPptpStatsTunnelPeerBearerCap Integer32, alPptpStatsTunnelPeerMaxChan Integer32, alPptpStatsTunnelActiveSessions Counter32 } alPptpStatsTunnelRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. Used to terminate the tunnel, cannot be used to create a tunnel." ::= { alPptpStatsTunnelEntry 1 } alPptpStatsTunnelPeerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's IP address for this tunnel." ::= { alPptpStatsTunnelEntry 2 } alPptpStatsTunnelDatastreamId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The IP-GRE datastream ID of this tunnel." ::= { alPptpStatsTunnelEntry 3 } alPptpStatsTunnelLocalIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The local IP address for this tunnel." ::= { alPptpStatsTunnelEntry 4 } alPptpStatsTunnelPeerHostName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's host name, as indicated by the peer in a Start-Control-Connection packet." ::= { alPptpStatsTunnelEntry 5 } alPptpStatsTunnelPeerVendorName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's vendor name, as indicated by the peer in a Start-Control-Connection packet." ::= { alPptpStatsTunnelEntry 6 } alPptpStatsTunnelPeerFirmwareRev OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the tunnel peer's firmware revision number. If the tunnel is idle this object should maintain its value from the last time it was connected." ::= { alPptpStatsTunnelEntry 7 } alPptpStatsTunnelPeerProtVers OBJECT-TYPE SYNTAX OCTET STRING (SIZE(2)) MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the protocol version and revision of the tunnel peers implementation. The first octet contains the protocol version. The second octet contains the protocol revision." ::= { alPptpStatsTunnelEntry 8 } alPptpStatsTunnelPeerFramingCap OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the Framing Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected." ::= { alPptpStatsTunnelEntry 9 } alPptpStatsTunnelPeerBearerCap OBJECT-TYPE SYNTAX Integer32 (0..3) MAX-ACCESS read-only STATUS current DESCRIPTION "This object describes the Bearer Capabilities of the tunnel peer. If the tunnel is idle this object should maintain its value from the last time it was connected." ::= { alPptpStatsTunnelEntry 10 } alPptpStatsTunnelPeerMaxChan OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's maximum channels value, as indicated by the peer in a Start-Control-Connection packet." ::= { alPptpStatsTunnelEntry 11 } alPptpStatsTunnelActiveSessions OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object contains the total number of sessions for this tunnel." ::= { alPptpStatsTunnelEntry 12 } alPptpStatsSessionTable OBJECT-TYPE SYNTAX SEQUENCE OF AlPptpStatsSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "List of active sessions within tunnels." ::= { alStatsPptp 3 } alPptpStatsSessionEntry OBJECT-TYPE SYNTAX AlPptpStatsSessionEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION "An entry in the alPptpStatsSessionTable." INDEX { alPptpStatsSessionDatastreamId } ::= { alPptpStatsSessionTable 1 } AlPptpStatsSessionEntry ::= SEQUENCE { alPptpStatsSessionRowStatus RowStatus, alPptpStatsSessionDatastreamId Integer32, alPptpStatsSessionLocalCallId Integer32, alPptpStatsSessionPeerCallId Integer32, alPptpStatsSessionUserName DisplayString, alPptpStatsSessionSerial Integer32, alPptpStatsSessionMinimumSpeed Integer32, alPptpStatsSessionMaximumSpeed Integer32, alPptpStatsSessionConnectSpeed Integer32, alPptpStatsSessionBearerType INTEGER, alPptpStatsSessionFramingType INTEGER, alPptpStatsSessionPhysicalChannel Integer32, alPptpStatsSessionLocalWindowSize Integer32, alPptpStatsSessionPeerWindowSize Integer32, alPptpStatsSessionLocalPpd Integer32, alPptpStatsSessionPeerPpd Integer32, alPptpStatsSessionRecvOctets Counter32, alPptpStatsSessionRecvPackets Counter32, alPptpStatsSessionRecvDiscards Counter32, alPptpStatsSessionRecvZLB Counter32, alPptpStatsSessionSendOctets Counter32, alPptpStatsSessionSendPackets Counter32, alPptpStatsSessionSendZLB Counter32, alPptpStatsSessionAckTimeouts Counter32, alPptpStatsSessionLocalFlowOff TruthValue, alPptpStatsSessionPeerFlowOff TruthValue, alPptpStatsSessionOutOfWindow Counter32, alPptpStatsSessionOutOfSequence Counter32, alPptpStatsSessionTunnelPeerIpAddr IpAddress } alPptpStatsSessionRowStatus OBJECT-TYPE SYNTAX RowStatus MAX-ACCESS read-write STATUS current DESCRIPTION "The status of this row. Used to terminate the session, cannot be used to create a Session." ::= { alPptpStatsSessionEntry 1 } alPptpStatsSessionDatastreamId OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The GRE-PPP datastream ID of this tunnel, used as the index for this row." ::= { alPptpStatsSessionEntry 2 } alPptpStatsSessionLocalCallId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The local call ID within the tunnel of the session represented by this row." ::= { alPptpStatsSessionEntry 3 } alPptpStatsSessionPeerCallId OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The peer call ID within the tunnel of the session represented by this row." ::= { alPptpStatsSessionEntry 4 } alPptpStatsSessionUserName OBJECT-TYPE SYNTAX DisplayString MAX-ACCESS read-only STATUS current DESCRIPTION "This object identifies the peer session name on this interface. This is typically the login name of the remote user. If the user name is unknown to the local tunnel peer then this object will contain a null string." ::= { alPptpStatsSessionEntry 5 } alPptpStatsSessionSerial OBJECT-TYPE SYNTAX Integer32 (0..65535) MAX-ACCESS read-only STATUS current DESCRIPTION "The call serial number within the tunnel of the session represented by this row." ::= { alPptpStatsSessionEntry 6 } alPptpStatsSessionMinimumSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The lowest acceptable line speed (in bits/second) for this session, as indicated in the Call-Request packet." ::= { alPptpStatsSessionEntry 7 } alPptpStatsSessionMaximumSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The highest acceptable line speed (in bits/second) for this session, as indicated in the Call-Request packet." ::= { alPptpStatsSessionEntry 8 } alPptpStatsSessionConnectSpeed OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The actual line speed (in bits/second) for this session." ::= { alPptpStatsSessionEntry 9 } alPptpStatsSessionBearerType OBJECT-TYPE SYNTAX INTEGER { analog (1), digital (2), any (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the bearer capability required for this session." ::= { alPptpStatsSessionEntry 10 } alPptpStatsSessionFramingType OBJECT-TYPE SYNTAX INTEGER { asynchronous (1), synchronous (2), either (3) } MAX-ACCESS read-only STATUS current DESCRIPTION "A value indicating the framing capability required for this session." ::= { alPptpStatsSessionEntry 11 } alPptpStatsSessionPhysicalChannel OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The physical channel number used for this session." ::= { alPptpStatsSessionEntry 12 } alPptpStatsSessionLocalWindowSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received data packets this system will buffer for this session, as indicated in the setup packets for this session." ::= { alPptpStatsSessionEntry 13 } alPptpStatsSessionPeerWindowSize OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of received data packets the peer will buffer for this session, as indicated in the setup packets for this session." ::= { alPptpStatsSessionEntry 14 } alPptpStatsSessionLocalPpd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A measure of the packet processing delay that might be imposed on data sent to this system, in units of 1/10 seconds." ::= { alPptpStatsSessionEntry 15 } alPptpStatsSessionPeerPpd OBJECT-TYPE SYNTAX Integer32 MAX-ACCESS read-only STATUS current DESCRIPTION "A measure of the packet processing delay that might be imposed on data sent to the peer, in units of 1/10 seconds." ::= { alPptpStatsSessionEntry 16 } alPptpStatsSessionRecvOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number payload octets received for this session." ::= { alPptpStatsSessionEntry 17 } alPptpStatsSessionRecvPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of payload packets received for this session." ::= { alPptpStatsSessionEntry 18 } alPptpStatsSessionRecvDiscards OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of payload packets received that were discarded for this session." ::= { alPptpStatsSessionEntry 19 } alPptpStatsSessionRecvZLB OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of Zero Length Body acknowlegement payload packets received for this session." ::= { alPptpStatsSessionEntry 20 } alPptpStatsSessionSendOctets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of payload octets transmitted for this session." ::= { alPptpStatsSessionEntry 21 } alPptpStatsSessionSendPackets OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of payload packets transmitted for this session." ::= { alPptpStatsSessionEntry 22 } alPptpStatsSessionSendZLB OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of Zero Length Body acknowledgement packets transmitted for this session." ::= { alPptpStatsSessionEntry 23 } alPptpStatsSessionAckTimeouts OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "This object returns the total number of acknowledgement timeouts seen on payload packets for this session." ::= { alPptpStatsSessionEntry 24 } alPptpStatsSessionLocalFlowOff OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the session is in a locally flowed-off state because the number of outstanding unacknowledged packets received from the peer is equal to the local window size." ::= { alPptpStatsSessionEntry 25 } alPptpStatsSessionPeerFlowOff OBJECT-TYPE SYNTAX TruthValue MAX-ACCESS read-only STATUS current DESCRIPTION "Indicates whether the session peer is in a flowed-off state because the number of outstanding unacknowledged packets sent to the peer is equal to the peer's window size." ::= { alPptpStatsSessionEntry 26 } alPptpStatsSessionOutOfWindow OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data packets received from the peer which were received outside of the offered receive window." ::= { alPptpStatsSessionEntry 27 } alPptpStatsSessionOutOfSequence OBJECT-TYPE SYNTAX Counter32 MAX-ACCESS read-only STATUS current DESCRIPTION "The number of data packets that were not received in the correct order (as per the sequence number)." ::= { alPptpStatsSessionEntry 28 } alPptpStatsSessionTunnelPeerIpAddr OBJECT-TYPE SYNTAX IpAddress MAX-ACCESS read-only STATUS current DESCRIPTION "The peer's IP address for the tunnel over which this session is established." ::= { alPptpStatsSessionEntry 29 } altigaPptpStatsMibConformance OBJECT IDENTIFIER ::= { altigaPptpStatsMibModule 1 } altigaPptpStatsMibCompliances OBJECT IDENTIFIER ::= { altigaPptpStatsMibConformance 1 } altigaPptpStatsMibCompliance MODULE-COMPLIANCE STATUS current DESCRIPTION "The compliance statement for agents which implement the Altiga PPTP Statistics MIB." MODULE MANDATORY-GROUPS { altigaPptpStatsGroup } ::= { altigaPptpStatsMibCompliances 1 } altigaPptpStatsGroup OBJECT-GROUP OBJECTS { alPptpStatsLocalProtVers, alPptpStatsLocalFraming, alPptpStatsLocalBearer, alPptpStatsLocalFirmwareRev, alPptpStatsTotalTunnels, alPptpStatsActiveTunnels, alPptpStatsMaxTunnels, alPptpStatsTotalSessions, alPptpStatsActiveSessions, alPptpStatsMaxSessions, alPptpStatsControlRecvOctets, alPptpStatsControlRecvPackets, alPptpStatsControlRecvDiscards, alPptpStatsControlSendOctets, alPptpStatsControlSendPackets, alPptpStatsPayloadRecvOctets, alPptpStatsPayloadRecvPackets, alPptpStatsPayloadRecvDiscards, alPptpStatsPayloadSendOctets, alPptpStatsPayloadSendPackets, alPptpStatsTunnelRowStatus, alPptpStatsTunnelDatastreamId, alPptpStatsTunnelLocalIpAddr, alPptpStatsTunnelPeerIpAddr, alPptpStatsTunnelPeerHostName, alPptpStatsTunnelPeerVendorName, alPptpStatsTunnelPeerFirmwareRev, alPptpStatsTunnelPeerProtVers, alPptpStatsTunnelPeerFramingCap, alPptpStatsTunnelPeerBearerCap, alPptpStatsTunnelPeerMaxChan, alPptpStatsTunnelActiveSessions, alPptpStatsSessionRowStatus, alPptpStatsSessionDatastreamId, alPptpStatsSessionLocalCallId, alPptpStatsSessionPeerCallId, alPptpStatsSessionUserName, alPptpStatsSessionSerial, alPptpStatsSessionMinimumSpeed, alPptpStatsSessionMaximumSpeed, alPptpStatsSessionConnectSpeed, alPptpStatsSessionBearerType, alPptpStatsSessionFramingType, alPptpStatsSessionPhysicalChannel, alPptpStatsSessionLocalWindowSize, alPptpStatsSessionPeerWindowSize, alPptpStatsSessionLocalPpd, alPptpStatsSessionPeerPpd, alPptpStatsSessionRecvOctets, alPptpStatsSessionRecvPackets, alPptpStatsSessionRecvDiscards, alPptpStatsSessionRecvZLB, alPptpStatsSessionSendOctets, alPptpStatsSessionSendPackets, alPptpStatsSessionSendZLB, alPptpStatsSessionAckTimeouts, alPptpStatsSessionLocalFlowOff, alPptpStatsSessionPeerFlowOff, alPptpStatsSessionOutOfWindow, alPptpStatsSessionOutOfSequence, alPptpStatsSessionTunnelPeerIpAddr } STATUS current DESCRIPTION "The objects for PPTP statistics." ::= { alPptpGroup 2 } END