ZYXEL-ES3124-MIB Download

pingCtlTable

Defines the ping Control Table for providing, via SNMP, the capability of performing ping operations at a remote host. The results of these operations are stored in the pingResultsTable and the pingProbeHistoryTable.

pingCtlEntry

Defines an entry in the pingCtlTable. The first index element, pingCtlOwnerIndex, is of type SnmpAdminString, a textual convention that allows for use of the SNMPv3 View-Based Access Control Model (RFC 2575 [11], VACM) and allows an management applicatio ...

pingCtlOwnerIndex

To facilitate the provisioning of access control by a security administrator using the View-Based Access Control Model (RFC 2575, VACM) for tables in which multiple users may need to independently create or modify entries, the initial index is used as an ...

pingCtlTestName

The name of the ping test. This is locally unique, within the scope of an pingCtlOwnerIndex.

pingCtlTargetAddressType

Specifies the type of host address to be used at a remote host for performing a ping operation.

pingCtlTargetAddress

Specifies the host address to be used at a remote host for performing a ping operation. The host address type is determined by the object value of corresponding pingCtlTargetAddressType. A value for this object MUST be set prior to transitioning its corr ...

pingCtlDataSize

Specifies the size of the data portion to be transmitted in a ping operation in octets. A ping request is usually an ICMP message encoded into an IP packet. An IP packet has a maximum size of 65535 octets. Subtracting the size of the ICMP or UDP header ...

pingCtlTimeOut

Specifies the time-out value, in seconds, for a remote ping operation.

pingCtlProbeCount

Specifies the number of times to perform a ping operation at a remote host.

pingCtlAdminStatus

Reflects the desired state that a pingCtlEntry should be in: enabled(1) - Attempt to activate the test as defined by this pingCtlEntry. disabled(2) - Deactivate the test as defined by this pingCtlEntry. Refer to the corresponding pingResultsOperStatus to ...

pingCtlDataFill

The content of this object is used together with the corresponding pingCtlDataSize value to determine how to fill the data portion of a probe packet. The option of selecting a data fill pattern can be useful when links are compressed or have data pattern ...

pingCtlFrequency

The number of seconds to wait before repeating a ping test as defined by the value of the various objects in the corresponding row. A single ping test consists of a series of ping probes. The number of probes is determined by the value of the correspondin ...

pingCtlMaxRows

The maximum number of entries allowed in the pingProbeHistoryTable. An implementation of this MIB will remove the oldest entry in the pingProbeHistoryTable to allow the addition of an new entry once the number of rows in the pingProbeHistoryTable reaches ...

pingCtlStorageType

The storage type for this conceptual row. Conceptual rows having the value 'permanent' need not allow write-access to any columnar objects in the row.

pingCtlTrapGeneration

The value of this object determines when and if to generate a notification for this entry: probeFailure(0) - Generate a pingProbeFailed notification subject to the value of pingCtlTrapProbeFailureFilter. The object pingCtlTrapProbeFailureFilter can be ...

pingCtlTrapProbeFailureFilter

The value of this object is used to determine when to generate a pingProbeFailed NOTIFICATION. Setting pingCtlTrapGeneration to probeFailure(0) implies that a pingProbeFailed NOTIFICATION is generated only when the number of successive probe failures as i ...

pingCtlTrapTestFailureFilter

The value of this object is used to determine when to generate a pingTestFailed NOTIFICATION. Setting pingCtlTrapGeneration to testFailure(1) implies that a pingTestFailed NOTIFICATION is generated only when the number of ping failures within a test excee ...

pingCtlType

The value of this object is used to either report or select the implementation method to be used for calculating a ping response time. The value of this object MAY be selected from pingImplementationTypeDomains. Additional implementation types SHOULD be ...

pingCtlDescr

The purpose of this object is to provide a descriptive name of the remote ping test.

pingCtlSourceAddressType

Specifies the type of the source address, pingCtlSourceAddress, to be used at a remote host when performing a ping operation.

pingCtlSourceAddress

Use the specified IP address (which must be given in numeric form, not as a hostname) as the source address in outgoing probe packets. On hosts with more than one IP address, this option can be used to force the source address to be something other than ...

pingCtlIfIndex

Setting this object to an interface's ifIndex prior to starting a remote ping operation directs the ping probes to be transmitted over the specified interface. A value of zero for this object means that this option is not enabled.

pingCtlByPassRouteTable

The purpose of this object is to optionally enable bypassing the route table. If enabled, the remote host will bypass the normal routing tables and send directly to a host on an attached network. If the host is not on a directly-attached network, an err ...

pingCtlDSField

Specifies the value to store in the Differentiated Services (DS) Field in the IP packet used to encapsulate the ping probe. The DS Field is defined as the Type of Service (TOS) octet in a IPv4 header or as the Traffic Class octet in a IPv6 header. The va ...

pingCtlRowStatus

This object allows entries to be created and deleted in the pingCtlTable. Deletion of an entry in this table results in all corresponding (same pingCtlOwnerIndex and pingCtlTestName index values) pingResultsTable and pingProbeHistoryTable entries being d ...

pingResultsTable

Defines the Ping Results Table for providing the capability of performing ping operations at a remote host. The results of these operations are stored in the pingResultsTable and the pingPastProbeTable. An entry is added to the pingResultsTable when an p ...

pingResultsEntry

Defines an entry in the pingResultsTable. The pingResultsTable has the same indexing as the pingCtlTable in order for a pingResultsEntry to correspond to the pingCtlEntry that caused it to be created.

pingResultsOperStatus

Reflects the operational state of a pingCtlEntry: enabled(1) - Test is active. disabled(2) - Test has stopped.

pingResultsIpTargetAddressType

This objects indicates the type of address stored in the corresponding pingResultsIpTargetAddress object.

pingResultsIpTargetAddress

This objects reports the IP address associated with a pingCtlTargetAddress value when the destination address is specified as a DNS name. The value of this object should be a zero length octet string when a DNS name is not specified or when a specified D ...

pingResultsMinRtt

The minimum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.

pingResultsMaxRtt

The maximum ping round-trip-time (RTT) received. A value of 0 for this object implies that no RTT has been received.

pingResultsAverageRtt

The current average ping round-trip-time (RTT).

pingResultsProbeResponses

Number of responses received for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probe responses have been received.

pingResultsSentProbes

The value of this object reflects the number of probes sent for the corresponding pingCtlEntry and pingResultsEntry. The value of this object MUST be reported as 0 when no probes have been sent.

pingResultsRttSumOfSquares

This object contains the sum of the squares for all ping responses received. Its purpose is to enable standard deviation calculation. The value of this object MUST be reported as 0 when no ping responses have been received.

pingResultsLastGoodProbe

Date and time when the last response was received for a probe.

pingProbeHistoryTable

Defines a table for storing the results of a ping operation. Entries in this table are limited by the value of the corresponding pingCtlMaxRows object. An entry in this table is created when the result of a ping probe is determined. The initial 2 instan ...

pingProbeHistoryEntry

Defines an entry in the pingProbeHistoryTable. The first two index elements identify the pingCtlEntry that a pingProbeHistoryEntry belongs to. The third index element selects a single probe result.

pingProbeHistoryIndex

An entry in this table is created when the result of a ping probe is determined. The initial 2 instance identifier index values identify the pingCtlEntry that a probe result (pingProbeHistoryEntry) belongs to. An implementation MUST start assigning pingP ...

pingProbeHistoryResponse

The amount of time measured in milliseconds from when a probe was sent to when its response was received or when it timed out. The value of this object is reported as 0 when it is not possible to transmit a probe.

pingProbeHistoryStatus

The result of a particular probe done by a remote host.

pingProbeHistoryLastRC

The last implementation method specific reply code received. If the ICMP Echo capability is being used then a successful probe ends when an ICMP response is received that contains the code ICMP_ECHOREPLY(0). The ICMP responses are defined normally in the ...

pingProbeHistoryTime

Timestamp for when this probe result was determined.