XYLAN-IPX-MIB Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the XYLAN-IPX-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the XYLAN-IPX-MIB .

OID list for XYLAN-IPX-MIB

xylanIpxStaticRouteTable: destinations reached via statically configured routes.
xylanIpxStaticRouteEntry: Each entry corresponds to one static route.
xylanIpxStaticRouteNetNum: The IPX network number of the route's destination.
xylanIpxStaticRouteAdminState: the route is functioning, delete (2) tell SNMP to delete the route
xylanIpxStaticRouteNextHopNet: reach the first hop in the static route.
xylanIpxStaticRouteNextHopNode: reach the first hop in the static route.
xylanIpxStaticRouteTicks: The delay, in ticks, to reach the route's destination.
xylanIpxStaticRouteHopCount: The number of hops necessary to reach the destination.
xylanIpxRipSapFilterTable: all filters that have been defined.
xylanIpxRipSapFilterEntry: Each entry corresponds to one filter.
xylanIpxRipSapFilterNum: be used when specifying a filter to delete.
xylanIpxRipSapFilterAdminState: the filter is functioning, delete (2) tells SNMP to delete the filter
xylanIpxRipSapFilterType: The type of filter.
xylanIpxRipSapFilterNet: of all 0's is used to denote All Networks.
xylanIpxRipSapFilterNetMask: The IPX Network Mask to be used.
xylanIpxRipSapFilterNode: of all 0's is used to denote All Nodes.
xylanIpxRipSapFilterNodeMask: The IPX node address mask to be used.
xylanIpxRipSapFilterSvcType: service types are defined by Novell. A value of ALL (65535) indicates that all services will be filtered.
xylanIpxRipSapFilterMode: packets matching this filter will be blocked, and allow (0) means that packets matching this filter will be allowed.
xylanIpxRipSapFilterGroupId: particular interface. A GroupId of 0 means that the filter is global.
xylanIpxRipSapFilterVlanId: The VlanId for this filter.
xylanIpxRipSapFilterWanType: can be used to specify whether this interface is a Frame Relay service or a PPP service. This will be used to determine whether the slot/port/vc or PeerId fields are applicable to this entry. A value of 1 implies that this field is not used. (The interf ...
xylanIpxRipSapFilterSlot: slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC).
xylanIpxRipSapFilterPort: slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC).
xylanIpxRipSapFilterVc: slot/port/vc can be used to apply this filter to a particular Virtual Circuit (VC).
xylanIpxRipSapFilterPeerId: PeerId can be used to apply this filter to a particular Peer.
xylanIpxWatchdogSpoofTable: all of the WAN routing services and their current IPX spoofing status.
xylanIpxWatchdogSpoofEntry: Each entry corresponds to one WAN routing service.
xylanIpxWatchdogSpoofGroupId: applies to.
xylanIpxWatchdogSpoofMode: enabled or disabled. When enabled, this routing service will spoof IPX Watchdog packets. When disabled, this routing service will not spoof IPX Watchdog packets.
xylanIpxSerialFilterTable: information about all of the WAN routing services and their current IPX Serialization Filtering status.
xylanIpxSerialFilterEntry: Each entry corresponds to one WAN routing service.
xylanIpxSerialFilterGroupId: applies to.
xylanIpxSerialFilterMode: enabled or disabled. When enabled, this routing service will filter IPX Serialization packets. When disabled, this routing service will not filter IPX Serialization packets.
xylanSpxKeepaliveSpoofTable: all of the WAN routing services and their current SPX Keepalive spoofing status.
xylanSpxKeepaliveSpoofEntry: Each entry corresponds to one WAN routing service.
xylanSpxKeepaliveSpoofGroupId: applies to.
xylanSpxKeepaliveSpoofMode: enabled or disabled. When enabled, this routing service will spoof SPX Keepalive packets. When disabled, this routing service will not spoof SPX Keepalive packets.
xylanIpxType20Table: can enable the passing of packet on each interface.
xylanIpxType20Entry: Each entry corresponds to one Virtual LAN.
xylanIpxType20VlanId: applies to.
xylanIpxType20Mode: enabled or disabled. When enabled, this routing interface will forward Type 20 packets. When disabled, the packets will not.
xylanIpxTimerTable: timers.
xylanIpxTimerEntry: Each entry corresponds to one Virtual LAN.
xylanIpxTimerVlanId: applies to.
xylanIpxTimerSap: This controls whether IPX SAP packet timer duration.
xylanIpxTimerRip: This controls whether IPX RIP packet timer duration.
xylanIpxDefRouteTable: the destinations to which all packets are sent when the destination network is not known.
xylanIpxDefRouteEntry: One table entry per switch for default route.
xylanIpxDefRouteNum: The table row ID will always be 1.
xylanIpxDefRouteNet: reach the first hop in the default route.
xylanIpxDefRouteNode: reach the first hop in the default route.
xylanIpxExtMsg: packets are sent and received.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list