SRED-MIB Download
The structure of Simple RED Information for the
proprietary enterprise.
IPHost Network Monitor offer an easy way of SNMP monitoring your D-Link Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for SRED-MIB
- swSredGlobalState
- This object enables/disables the Simple RED state of the device.
- swSredDropCounterTable
- A table that contains SRED drop packet counter information for each port.
- swSredDropCounterEntry
- A list that contains SRED drop packet counter information per port.
- swSredPortIndex
- This object indicates the port number.
- swSredLowDropCounter
- This object indicates the drop count for red packets.
- swSredHighDropCounter
- This object indicates the drop count for yellow packets.
- swSredCtrlTable
- A table that contains the SRED setting for each port.
- swSredCtrlEntry
- A list that contains the SRED setting per port.
- swSredCtrlPortIndex
- This object indicates the port number.
- swSredCtrlClassIndex
- This object indicates the hardware CoS queues the config SRED command will apply to.
- swSredCtrlThresholdLow
- This object indicates the low threshold that specifies the percentage of space utilized.
- swSredCtrlThresholdHigh
- This object indicates the high threshold that specifies the percentage of queue space utilized.
- swSredCtrlDropRateLow
- This object indicates the probabilistic drop rate if above the low threshold. There are eight drop rates: 1 100% 2 6.25% 3 3.125% 4 1.5625% 5 0.78125% 6 0.390625% 7 0.1953125% 8 0.09765625% DEFVAL { 1 } ::= { swSredCtrlEntry 5 } SYNTAX INTEGER (1 ...
- sw8021pColorMapCtrlTable
- A table that contains information about priority map to packet color on each port.
- sw8021pColorMapCtrlEntry
- A list that contains priority map to packet color on per port.
- sw8021pColorMapCtrlPortIndex
- This object indicates the port number.
- sw8021pColorMapCtrlPriorityIndex
- This object indicates the source priority of incoming packets.
- sw8021pColorMapCtrlColor
- This object indicates the source priority of incoming packets.
- swDscpTrustPortCtrlTable
- A table that contains information about the DSCP trust portlist.
- swDscpTrustPortCtrlEntry
- A list that contains the DSCP trust state for per port.
- swDscpTrustPortCtrlPortIndex
- This object indicates the port number.
- swDscpTrustPortCtrlState
- This object is used to enable/disable the DSCP trust state on a selected port.
- swDscpMapCtrlTable
- A table that contains information about DSCP map to priority and packet color on each port.
- swDscpMapCtrlEntry
- A list that contains DSCP map information for each port.
- swDscpMapCtrlPortIndex
- This object indicates the port number.
- swDscpMapCtrlDscpIndex
- This object indicates the source DSCP incoming packet.
- swDscpMapCtrl8021pPriority
- This object indicates the 802.1p priority on each port. Default value is: DSCP Priority 0-7 0 8-15 1 16-23 2 24-31 3 32-39 4 40-47 5 48-55 6 56-63 7 ::= { swDscpMapCtrlEntry 3 } SYNTAX INTEGER(0..63) MAX-ACCESS read-write STATUS current DESCRIPTION Thi ...
- swDscpMapCtrlColor
- This object maps the color for packets on each port.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
