SMON-MIB Download
The MIB module for managing remote monitoring device
implementations for Switched Networks
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for SMON-MIB
- smonCapabilities
- An indication of the SMON MIB groups supported by this agent.
- dataSourceCapsTable
- This table describes RMON data sources and port copy capabilities. An NMS MAY use this table to discover the identity and attributes of the data sources on a given agent implementation. Similar to the probeCapabilities object, actual row-creation operatio ...
- dataSourceCapsEntry
- Entries per data source containing descriptions of data source and port copy capabilities. This table is populated by the SMON agent with one entry for each supported data source.
- dataSourceCapsObject
- Defines an object that can be a SMON data source or a source or a destination for a port copy operation.
- dataSourceRmonCaps
- General attributes of the specified dataSource. Note that these are static attributes, which SHOULD NOT be adjusted because of current resources or configuration. - countErrFrames(0) The agent sets this bit for the dataSource if errored frames received on ...
- dataSourceCopyCaps
- PortCopy function capabilities of the specified dataSource. Note that these are static capabilities, which SHOULD NOT be adjusted because of current resources or configuration. - copySourcePort(0) The agent sets this bit if this dataSource is capable of a ...
- dataSourceCapsIfIndex
- This object contains the ifIndex value of the ifEntry associated with this smonDataSource. The agent MUST create 'propVirtual' ifEntries for each dataSourceCapsEntry of type VLAN or entPhysicalEntry.
- smonVlanStatsControlTable
- Controls the setup of VLAN statistics tables. The statistics collected represent a distribution based on the IEEE 802.1Q VLAN-ID (VID), for each good frame attributed to the data source for the collection.
- smonVlanStatsControlEntry
- A conceptual row in the smonVlanStatsControlTable.
- smonVlanStatsControlIndex
- A unique arbitrary index for this smonVlanStatsControlEntry.
- smonVlanStatsControlDataSource
- The source of data for this set of VLAN statistics. This object MAY NOT be modified if the associated smonVlanStatsControlStatus object is equal to active(1).
- smonVlanStatsControlCreateTime
- The value of sysUpTime when this control entry was last activated. This object allows to a management station to detect deletion and recreation cycles between polls.
- smonVlanStatsControlOwner
- Administratively assigned named of the owner of this entry. It usually defines the entity that created this entry and is therefore using the resources assigned to it, though there is no enforcement mechanism, nor assurance that rows created are ever used.
- smonVlanStatsControlStatus
- The status of this row. An entry MAY NOT exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the smonVlanIdStatsTable SHALL be deleted.
- smonVlanIdStatsTable
- Contains the VLAN statistics data. The statistics collected represent a distribution based on the IEEE 802.1Q VLAN-ID (VID), for each good frame attributed to the data source for the collection. This function applies the same rules for attributing frames ...
- smonVlanIdStatsEntry
- A conceptual row in smonVlanIdStatsTable.
- smonVlanIdStatsId
- The unique identifier of the VLAN monitored for this specific statistics collection. Tagged packets match the VID for the range between 1 and 4094. An external RMON probe MAY detect VID=0 on an Inter Switch Link, in which case the packet belongs to a VLAN ...
- smonVlanIdStatsTotalPkts
- The total number of packets counted on this VLAN.
- smonVlanIdStatsTotalOverflowPkts
- The number of times the associated smonVlanIdStatsTotalPkts counter has overflowed.
- smonVlanIdStatsTotalHCPkts
- The total number of packets counted on this VLAN.
- smonVlanIdStatsTotalOctets
- The total number of octets counted on this VLAN.
- smonVlanIdStatsTotalOverflowOctets
- The number of times the associated smonVlanIdStatsTotalOctets counter has overflowed.
- smonVlanIdStatsTotalHCOctets
- The total number of octets counted on this VLAN.
- smonVlanIdStatsNUcastPkts
- The total number of non-unicast packets counted on this VLAN.
- smonVlanIdStatsNUcastOverflowPkts
- The number of times the associated smonVlanIdStatsNUcastPkts counter has overflowed.
- smonVlanIdStatsNUcastHCPkts
- The total number of non-unicast packets counted on this VLAN.
- smonVlanIdStatsNUcastOctets
- The total number of non-unicast octets counted on this VLAN.
- smonVlanIdStatsNUcastOverflowOctets
- The number of times the associated smonVlanIdStatsNUcastOctets counter has overflowed.
- smonVlanIdStatsNUcastHCOctets
- The total number of Non-unicast octets counted on this VLAN.
- smonVlanIdStatsCreateTime
- The value of sysUpTime when this entry was last activated. This object allows to a management station to detect deletion and recreation cycles between polls.
- smonPrioStatsControlTable
- Controls the setup of priority statistics tables. The smonPrioStatsControlTable allows configuration of collections based on the value of the 3-bit user priority field encoded in the Tag Control Information (TCI) field according to [19],[20]. Note that th ...
- smonPrioStatsControlEntry
- A conceptual row in the smonPrioStatsControlTable.
- smonPrioStatsControlIndex
- A unique arbitrary index for this smonPrioStatsControlEntry.
- smonPrioStatsControlDataSource
- The source of data for this set of VLAN statistics. This object MAY NOT be modified if the associated smonPrioStatsControlStatus object is equal to active(1).
- smonPrioStatsControlCreateTime
- The value of sysUpTime when this entry was created. This object allows to a management station to detect deletion and recreation cycles between polls.
- smonPrioStatsControlOwner
- Administratively assigned named of the owner of this entry. It usually defines the entity that created this entry and is therefore using the resources assigned to it, though there is no enforcement mechanism, nor assurance that rows created are ever used.
- smonPrioStatsControlStatus
- The status of this row. An entry MAY NOT exist in the active state unless all objects in the entry have an appropriate value. If this object is not equal to active(1), all associated entries in the smonPrioStatsTable SHALL be deleted.
- smonPrioStatsTable
- Contains the priority statistics. The collections are based on the value of the 3-bit user priority field encoded in the Tag Control Information (TCI) field according to [19], [20]. Note that this table merely reports priority as encoded in the VLAN heade ...
- smonPrioStatsEntry
- A conceptual row in smonPrioStatsTable.
- smonPrioStatsId
- The unique identifier of the priority level monitored for this specific statistics collection.
- smonPrioStatsPkts
- The total number of packets counted on this priority level.
- smonPrioStatsOverflowPkts
- The number of times the associated smonPrioStatsPkts counter has overflowed.
- smonPrioStatsHCPkts
- The total number of packets counted on this priority level.
- smonPrioStatsOctets
- The total number of octets counted on this priority level.
- smonPrioStatsOverflowOctets
- The number of times the associated smonPrioStatsOctets counter has overflowed.
- smonPrioStatsHCOctets
- The total number of octets counted on this priority level.
- portCopyTable
- Port Copy provides the ability to copy all frames from a specified source to specified destination within a switch. Source and destinations MUST be ifEntries, as defined by [22]. One to one, one to many, many to one and many to many source to destination ...
- portCopyEntry
- Describes a particular port copy entry.
- portCopySource
- The ifIndex of the source which will have all packets redirected to the destination as defined by portCopyDest.
- portCopyDest
- Defines the ifIndex destination for the copy operation.
- portCopyDestDropEvents
- The total number of events in which port copy packets were dropped by the switch at the destination port due to lack of resources. Note that this number is not necessarily the number of packets dropped; it is just the number of times this condition has be ...
- portCopyDirection
- This object affects the way traffic is copied from a switch source port, for the indicated port copy operation. If this object has the value 'copyRxOnly(1)', then only traffic received on the indicated source port will be copied to the indicated destinati ...
- portCopyStatus
- Defines the status of the port copy entry. In order to configure a source to destination portCopy relationship, both source and destination interfaces MUST be present as an ifEntry in the ifTable and their respective ifAdminStatus and ifOperStatus values ...
- dataSourceCapsGroup
- Defines the objects that describe the capabilities of RMON data sources.
- smonVlanStatsGroup
- Defines the switch monitoring specific statistics - per VLAN Id on interfaces of 10MB or less.
- smonPrioStatsGroup
- Defines the switch monitoring specific statistics - per VLAN Id on interface.
- smonHcTo100mbGroup
- Defines the additional high capacity statistics needed to be kept on interfaces with ifSpeed greater than 10MB/sec and less than or equal to 100MB/sec.
- smonHc100mbPlusGroup
- Defines the additional high capacity statistics needed to be kept on interfaces with ifSpeed of more than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry.
- hcVlanTo100mbGroup
- Defines the additional high capacity VLAN statistics needed to be kept on interfaces with ifSpeed greater than 10MB/sec and less than or equal to 100MB/sec.
- hcVlan100mbPlusGroup
- Defines the additional high capacity VLAN statistics needed to be kept on interfaces with ifSpeed of more than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry.
- hcPrioTo100mbGroup
- Defines the additional high capacity VLAN priority statistics needed to be kept on interfaces with ifSpeed of greater than 10MB/sec and less than or equal to 100MB/sec.
- hcPrio100mbPlusGroup
- Defines the additional high capacity VLAN priority statistics needed to be kept on interfaces with ifSpeed of greater than 100MB/sec. These statistics MUST also be kept on smonDataSources of type VLAN or entPhysicalEntry.
- smonVlanStatsExtGroup
- Defines the switch monitoring specific statistics for systems capable of counting non-unicast octets for a given dataSource (as described in the dataSourceRmonCaps object).
- smonInformationGroup
- An indication of the SMON capabilities supported by this agent.
- portCopyConfigGroup
- Defines the control objects for copy port operations.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
