PORT-SECURITY-MIB Download

swPortSecTrapLogState

When enabled(1), whenever there's a new MAC address that violates the pre-defined port security configuration, traps will be sent out and the relevant information will be logged into the system.

swPortSecSysMaxLernAddr

Indicates the maximum number of addresses to be authorized by port security on the system. The max entry range is (1..N). The value N means the max number and is determined by the project itself.

swPortSecPortTable

A port security feature which controls the address learning capability and traffic forwarding decisions. Each port can be enabled or disabled for this function. When it is enabled and a number is given said N, which allows N addresses to be learned on thi ...

swPortSecPortEntry

A list of information contained in the swPortSecPortTable.

swPortSecPortIndex

Indicates the secured port to lock address learning.

swPortSecPortMaxLernAddr

Indicates the allowable number of addresses to be learned on this port. The max entry range is (0..N). The value N means the max number and is determined by the project itself.

swPortSecPortLockAddrMode

Indicates the mode of locking address. In deleteOnTimeout(2) mode, the locked addresses can be aged out after the aging timer expires. In this mode, when the locked address is aged out, the number of addresses that can be learned has to be increased by on ...

swPortSecPortAdmState

Indicates the administration state of the locking address.

swPortSecPortClearCtrl

Used to clear port security entries by port. Setting this value to 'start' will execute the clear action. Once cleared, the value returns to 'other'.

swPortSecVLANTable

A port security feature which controls the address leaning capability. When number is given said N, which allows N addresses to be learned on this VLAN, the first N learned addresses are locked at this VLAN as static entries. When the learned addresses nu ...

swPortSecVLANEntry

A list of information contained in the swPortSecVLANTable.

swPortSecVLANID

Indicates the secured VLAN to lock address learning.

swPortSecVLANMaxLernAddr

Indicates allowable number of addresses to be learned on this VLAN. A value of -1 means no-limit. The default value is no-limit. The max entry range is (0..N). The value N means the max number and is determined by the project itself.

swPortSecVLANClearCtrl

Used to clear port security entries by VLAN. Setting this value to 'start' will execute the clear action. Once cleared, the value returns to 'other'. ::= { swPortSecVLANEntry 3 } -- ------------------------------------------------------------------------- ...

swPortSecVLANOnPortEntry

A list of information contained in the swPortSecVLANOnPortTable.

swPortSecVLANOnPortMaxLernAddr

Indicates allowable number of addresses to be learned on this VLAN from the special port. A value of -1 means no-limit. The default value is no-limit. Only VLANs with limitations will be displayed in this table. The max entry range is (0..N). The value N ...

swPortSecVLANOnPortAddCtrl

other (1): When user gets this object, it always returns other(1). add (2): Used to configure the VLAN limit from the special port. If 'add' is selected, swPortSecVLANOnPortMaxLernAddr must be set to a valid value except -1. ::= { swPortSecVLANOnPortEntry ...

swPortSecMgmtByVLANOnPortClearVID

Indicates the VID.

swPortSecMgmtByVLANOnPortClearAction

other(1): When user gets this object, it always returns other(1). start(2): Used to clear port security entries by VLAN on the special port.

swPortSecEntriesTable

This table is used to show port security entries.

swPortSecEntriesEntry

A list of information contained in the swPortSecEntriesTable.

swPortSecMac

Specifies a MAC address.

swPortSecVID

Indicates the VLAN ID.

swPortSecPort

Indicates the port.

swPortSecDelCtrl

Used to delete this port security entry. Setting this value to 'start' will execute the delete action. Once deleted, the value returns to 'other'.