Nortel-Magellan-Passport-ServerAccessRsaMIB Download

rsaRowStatusTable

This entry controls the addition and deletion of rsa components.

rsaRowStatusEntry

A single entry in the table represents a single rsa component.

rsaRowStatus

This variable is used as the basis for SNMP naming of rsa components. These components can be added and deleted.

rsaComponentName

This variable provides the component's string name for use with the ASCII Console Interface

rsaStorageType

This variable represents the storage type value for the rsa tables.

rsaIndex

This variable represents the index for the rsa tables.

rsaOptionsTable

The Options group defines provisionable attributes associated with the Rsa component.

rsaOptionsEntry

An entry in the rsaOptionsTable.

rsaLogicalProcessor

This attribute specifies the logical processor on which the RSA process will execute.

rsaStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

rsaStateEntry

An entry in the rsaStateTable.

rsaAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

rsaOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

rsaUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

rsaOperationalTable

The Operational group defines operational attributes associated with the Rsa component.

rsaOperationalEntry

An entry in the rsaOperationalTable.

rsaMaxRsiConnections

This attribute specifies the maximum number of RSI connections which can be supported by this Rsa.

rsaRsiConnections

This attribute specifies the number of active RSI connections currently supported by the Rsa component.

rsaDnaRowStatusTable

This entry controls the addition and deletion of rsaDna components.

rsaDnaRowStatusEntry

A single entry in the table represents a single rsaDna component.

rsaDnaRowStatus

This variable is used as the basis for SNMP naming of rsaDna components. These components cannot be added nor deleted.

rsaDnaComponentName

This variable provides the component's string name for use with the ASCII Console Interface

rsaDnaStorageType

This variable represents the storage type value for the rsaDna tables.

rsaDnaIndex

This variable represents the index for the rsaDna tables.

rsaDnaAddressTable

The Address group contains attributes common to all Dna's. Every Dna used in the network is defined with this group of 2 attributes. The string of address digits is complemented by the type of address or Npi. These attributes are used to interpret the for ...

rsaDnaAddressEntry

An entry in the rsaDnaAddressTable.

rsaDnaNumberingPlanIndicator

This attribute indicates the Numbering Plan Indicator (NPI) of the Dna that is entered. An address may belong to the X.121 or E.164 numbering plans. X.121 is used in packet switched data networks.

rsaDnaDataNetworkAddress

The Dna attribute contains digits which form a unique identifier of the customer interface. It can be compared (approximation only) to a telephone number where each phone number identifies a unique telephone set. Dna digits are selected and assigned by ne ...

rsaDnaOutgoingOptionsTable

The OutgoingOptions group defines call options of a Dna for calls which are made out of the interface represented by the Dna. These options are not used for calls arriving to the interface represented by the Dna.

rsaDnaOutgoingOptionsEntry

An entry in the rsaDnaOutgoingOptionsTable.

rsaDnaOutCalls

This attribute, if set to a value of allowed indicates that outgoing calls (from the DTE to the network) can be made using this particular Dna. If set to a value of disallowed, then outgoing calls cannot be made using this Dna - such calls will be cleared ...

rsaDnaIncomingOptionsTable

IncomingOptions defines the set of options for incoming calls. These options are used for calls arriving to the interface represented by the Dna. For calls originated from the interface, IncomingOptions attributes are not used.

rsaDnaIncomingOptionsEntry

An entry in the rsaDnaIncomingOptionsTable.

rsaDnaIncCalls

This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) can be made to this Dna. If set to a value of disallowed, then incoming calls cannot be made to this Dna - such calls will be cleared by the local DCE ...

rsaDnaIncAccess

This attribute is an extension of the Closed User Group (CUG) facility, as follows: This attribute, if set to a value of allowed indicates that incoming calls (from the network to the DTE) from the open (non-CUG) part of the network are permitted. It also ...

rsaDnaCugRowStatusTable

This entry controls the addition and deletion of rsaDnaCug components.

rsaDnaCugRowStatusEntry

A single entry in the table represents a single rsaDnaCug component.

rsaDnaCugRowStatus

This variable is used as the basis for SNMP naming of rsaDnaCug components. These components can be added and deleted.

rsaDnaCugComponentName

This variable provides the component's string name for use with the ASCII Console Interface

rsaDnaCugStorageType

This variable represents the storage type value for the rsaDnaCug tables.

rsaDnaCugIndex

This variable represents the index for the rsaDnaCug tables.

rsaDnaCugCugOptionsTable

Attributes in this group define ClosedUserGroup options associated with this particular interlockCode. Dna's with the same Cug (interlockCode) can make calls within this group. Various combinations which permit or prevent calls in the same Cug group are d ...

rsaDnaCugCugOptionsEntry

An entry in the rsaDnaCugCugOptionsTable.

rsaDnaCugType

This attribute specifies the Cug type - the Cug is either a national Cug, or an international Cug. International closed user groups are usually established between DTEs for which there is an X.75 Gateway between; whereas national closed user groups are us ...

rsaDnaCugDnic

This attribute specifies the dnic (Data Network ID Code) of the Cug by which packet networks are identified. This attribute is not applicable if the Cug is a national Cug, as specified by the Cug type attribute. There are usually 1 or 2 dnics assigned per ...

rsaDnaCugInterlockCode

This attribute specifies the Cug identifier of a national or international Cug call. It is an arbitrary number and it also can be called Cug in some descriptions. Interfaces (Dna's) defined with this number can make calls to Dna's with the same interlockC ...

rsaDnaCugPreferential

This attribute, if set to yes indicates that this Cug is the preferential Cug, in which case it will be used during the call establishment phase if the DTE has not explicitly specified a Cug index in the call request packet. If set to no, then this Cug is ...

rsaDnaCugOutCalls

This attribute, if set to allowed indicates that outgoing calls (from the DTE into the network) can be made using this particular Cug. If set to a value of disallowed, then outgoing calls cannot be made using this Cug - such calls will be cleared by the l ...

rsaDnaCugIncCalls

This attribute, if set to allowed indicates that incoming calls (from the network to the DTE) can be made using this particular Cug. If set to disallowed, then incoming calls cannot be made using this Cug - such calls will be cleared by the local DCE. Thi ...

rsaDnaCugPrivileged

This attribute, if set to yes indicates that this Cug is a privileged Cug. In DPN, at least one side of a call setup within a Cug must have the Cug as a privileged Cug. If set to no, then the Cug is not privileged. If both the local DTE and the remote DTE ...

rsaVncsAccessRowStatusTable

This entry controls the addition and deletion of rsaVncsAccess components.

rsaVncsAccessRowStatusEntry

A single entry in the table represents a single rsaVncsAccess component.

rsaVncsAccessRowStatus

This variable is used as the basis for SNMP naming of rsaVncsAccess components. These components can be added and deleted.

rsaVncsAccessComponentName

This variable provides the component's string name for use with the ASCII Console Interface

rsaVncsAccessStorageType

This variable represents the storage type value for the rsaVncsAccess tables.

rsaVncsAccessIndex

This variable represents the index for the rsaVncsAccess tables.

rsaVncsAccessProvisionedTable

The Provisioned group defines provisioned attributes associated with the VncsAccess component.

rsaVncsAccessProvisionedEntry

An entry in the rsaVncsAccessProvisionedTable.

rsaVncsAccessTimeToLive

This attribute specifies the length of time VNCS requests are allowed to remain queued for transmission before they are considered too old and are discarded. This attribute should be set in considereation with the voice application timeout interval.

rsaVncsAccessStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

rsaVncsAccessStateEntry

An entry in the rsaVncsAccessStateTable.

rsaVncsAccessAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

rsaVncsAccessOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

rsaVncsAccessUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

rsaVncsAccessOperationalTable

The Operational group defines operational attributes associated with the VncsAccess component.

rsaVncsAccessOperationalEntry

An entry in the rsaVncsAccessOperationalTable.

rsaVncsAccessRequestsSent

This attribute counts the number of translation requests sent to VNCS. This counter wraps to zero when it reaches its maximum value.

rsaVncsAccessRepliesReceived

This attribute counts the number of translation replies received from VNCS. This counter wraps to zero when it reaches its maximum value.

rsaVncsAccessRequestsQueued

This attribute indicates the number of translation requests queued for transmission to VNCS.

rsaVncsAccessRequestsDiscarded

This attribute counts the number of translation requests discarded before being sent to VNCS. Requests are discarded if the queue becomes too large or the VNCS server is unavailable. This counter wraps to zero when it reaches its maximum value.

rsaConnectionRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rsaConnection components.

rsaConnectionRowStatusEntry

A single entry in the table represents a single rsaConnection component.

rsaConnectionRowStatus

This variable is used as the basis for SNMP naming of rsaConnection components. These components cannot be added nor deleted.

rsaConnectionComponentName

This variable provides the component's string name for use with the ASCII Console Interface

rsaConnectionStorageType

This variable represents the storage type value for the rsaConnection tables.

rsaConnectionIndex

This variable represents the index for the rsaConnection tables.

rsaConnectionOperationalTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The Operational group defines operational attributes associated with the Connection component.

rsaConnectionOperationalEntry

An entry in the rsaConnectionOperationalTable.

rsaConnectionRemoteName

This attribute specifies an ASCII string identifier for the remote module which is retrieved from the call request as user data.

rsaConnectionCallState

This attribute indicates the state of the connection. The normal state for the connection is dataTransfer. The other states are transient states used to setup or clear the connection.

rsaConnectionServerStatsTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** The ServerStatistics group provides individual server usage statistics for the connection.

rsaConnectionServerStatsEntry

An entry in the rsaConnectionServerStatsTable.

rsaConnectionVncsRequests

This attribute counts the number of VNCS translation requests sent or received on this connection.

rsaConnectionVncsReplies

This attribute counts the number of VNCS translation replies sent or received on this connection.

rsaConnectionLapfStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the LAPF status.

rsaConnectionLapfStatusEntry

An entry in the rsaConnectionLapfStatusTable.

rsaConnectionLapfState

This attribute shows the current state of the LAPF interface. The normal states are informationTransfer and waitingAck. Since the LAPF interface is not over a physical link the other states are transitional.

rsaConnectionLapfQueueSize

This attribute indicates the number of frames in the LAPF transmit queue.

rsaConnectionLapfStatsTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group contains the LAPF statistics.

rsaConnectionLapfStatsEntry

An entry in the rsaConnectionLapfStatsTable.

rsaConnectionLapfStateChanges

This attribute counts the number of times the LAPF interface has changed state. While the LAPF interface is in informationTransfer state, this counter will increment on each expiry of idleProbeTimer as its state goes from informationTransfer to waitingAck ...

rsaConnectionLapfRemoteBusy

This attribute counts the number of times transmission of an I-frame was unsuccessful due to a perceived remote busy condition (window closed or remote busy). When this count reaches maximum, it wraps to zero.

rsaConnectionLapfAckTimeouts

This attribute counts the number of times the ackTimer has expired. Frequent increments of this counter indicate improper values have been chosen for ackTimer and ackDelayTimer between the local and remote ends. When this count reaches maximum, it wraps t ...

rsaConnectionLapfRejectFramesRx

This attribute counts the number of REJ frames received. When this count reaches maximum, it wraps to zero.

rsaConnectionLapfIFramesTx

This attribute counts the number of I-frames transmitted. An I- frame may be counted more than once if there are retransmissions. When this count reaches maximum, it wraps to zero.

rsaConnectionLapfIFramesTxDiscarded

This attribute counts the number of transmit I-frames that have been discarded. Discard reasons may be one of the following: 1. The frame length is beyond allowed limit. 2. The LAPF interface is in disconnected state. 3. The transmit queue has been pur ...

rsaConnectionLapfIFramesRx

This attribute counts the number of I-frames received. When this count reaches maximum, it wraps to zero.

rsaConnectionLapfIFramesRxDiscarded

This attribute counts the number of received I-frames that have been discarded. The discard reasons are: 1. Incorrect frame size. 2. Frame is out of sequence. 3. Frame received while not in informationTransfer or waitingAck state. When this count reaches ...

rsaConnectionVcRowStatusTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This entry controls the addition and deletion of rsaConnectionVc components.

rsaConnectionVcRowStatusEntry

A single entry in the table represents a single rsaConnectionVc component.

rsaConnectionVcRowStatus

This variable is used as the basis for SNMP naming of rsaConnectionVc components. These components cannot be added nor deleted.

rsaConnectionVcComponentName

This variable provides the component's string name for use with the ASCII Console Interface

rsaConnectionVcStorageType

This variable represents the storage type value for the rsaConnectionVc tables.

rsaConnectionVcIndex

This variable represents the index for the rsaConnectionVc tables.

rsaConnectionVcCadTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group represents operational call data related to Frame Relay Vc. It can be displayed only for Frame Relay Vc which is created by application.

rsaConnectionVcCadEntry

An entry in the rsaConnectionVcCadTable.

rsaConnectionVcType

This attribute displays the type of call, pvc,svc or spvc.

rsaConnectionVcState

This attribute displays the state of call control. P5 state is not supported but is listed for completness. Transitions from one state to another take very short time. state most often displayed is dataTransferP4.

rsaConnectionVcPreviousState

This attribute displays the previous state of call control. This is a valuable field to determine how the processing is progressing.

rsaConnectionVcDiagnosticCode

This attribute displays the internal substate of call control. It is used to further refine state of call processing.

rsaConnectionVcPreviousDiagnosticCode

This attribute displays the internal substate of call control. It is used to further refine state of call processing.

rsaConnectionVcCalledNpi

This attribute displays the Numbering Plan Indicator (NPI) of the called end.

rsaConnectionVcCalledDna

This attribute displays the Data Network Address (Dna) of the called (destination) DTE to which this call is sent. This address if defined at recieving end will complete Vc connection.

rsaConnectionVcCalledLcn

This attribute displays the Logical Channel Number of the called end. It is valid only after both ends of Vc exchanged relevant information.

rsaConnectionVcCallingNpi

This attribute displays the Numbering Plan Indicator (NPI) of the calling end.

rsaConnectionVcCallingDna

This attribute displays the Data Network Address (Dna) of the calling end.

rsaConnectionVcCallingLcn

This attribute displays the Logical Channel Number of the calling end.

rsaConnectionVcAccountingEnabled

This attribute indicates that this optional section of accounting record is suppressed or permitted. If accountingEnabled is yes, conditions for generation of accounting record were met. These conditions include billing options, vc recovery conditions and ...

rsaConnectionVcFastSelectCall

This attribute displays that this is a fast select call.

rsaConnectionVcPathReliability

This attribute displays the path reliability.

rsaConnectionVcAccountingEnd

This attribute indicates if this end should generate an accounting record. Normally, callingEnd is the end to generate an accounting record.

rsaConnectionVcPriority

This attribute displays whether the call is a normal or a high priority call.

rsaConnectionVcSegmentSize

This attribute displays the segment size (in bytes) used on the call. It is used to calculate the number of segments transmitted and received.

rsaConnectionVcMaxSubnetPktSize

This attribute indicates the maximum packet size allowed on the Vc.

rsaConnectionVcRcosToNetwork

This attribute indicates the routing metric routing class of service to the network.

rsaConnectionVcRcosFromNetwork

This attribute displays the routing metric Routing Class of Service from the Network.

rsaConnectionVcEmissionPriorityToNetwork

This attribute displays the network internal emission priotity to the network.

rsaConnectionVcEmissionPriorityFromNetwork

This attribute displays the network internal emission priotity from the network.

rsaConnectionVcDataPath

This attribute indicates the data path used by the connection. The data path is provisioned in Dna and DirectCall components. The displayed value of this attribute can be different from the provisioned value. If the connection is using dprsOnly data path, ...

rsaConnectionVcIntdTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines display of interval data collected by Vc. Data in this group is variable and may depend on time when this display command is issued.

rsaConnectionVcIntdEntry

An entry in the rsaConnectionVcIntdTable.

rsaConnectionVcCallReferenceNumber

This attribute displays the call reference number which is a unique number generated by the switch.The same Call Reference Number is stored in the interval data (accounting record) at both ends of the call. It can be used as one of the attributes in match ...

rsaConnectionVcElapsedTimeTillNow

This attribute displays the elapsed time representing the period of this interval data. It is elapsed time in 0.1 second increments since Vc started.

rsaConnectionVcSegmentsRx

This attribute displays the number of segments received at the time command was issued. This is the segment received count maintained by accounting at each end of the Vc. This counter is updated only when the packet cannot be successfully delivered out of ...

rsaConnectionVcSegmentsSent

This attribute displays the number of segments sent at the time command was issued. This is the segment sent count maintained by accounting at the source Vc. Vc only counts packets that Vc thinks can be delivered successfully into the subnet. In reality, ...

rsaConnectionVcStartTime

This attribute displays the start time of this interval period. If Vc spans 12 hour time or time of day change startTime reflects new time as recorded at 12 hour periods or time of day changes.

rsaConnectionVcFrdTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This group defines Frame Relay attributes collected by Frame Relay Vc. The purpose of Vc attributes is to aid end users and verification people to understand the Vc internal behavior. This is particularly usefu ...

rsaConnectionVcFrdEntry

An entry in the rsaConnectionVcFrdTable.

rsaConnectionVcFrmCongestedToSubnet

This attribute displays the number of frames from link discarded due to lack of resources. It keeps track of the number of frames from link that have to be discarded. The discard reasons include insufficient memory for splitting the frame into smaller sub ...

rsaConnectionVcCannotForwardToSubnet

This attribute displays the number of discarded packets that can not be forwarded into the subnet because of subnet congestion. Number of frames from link discarded due to failure in forwarding a packet from Vc into the subnet.- This attribute is increase ...

rsaConnectionVcNotDataXferToSubnet

This attribute records the number of frames from link discarded when the Vc tries to recover from internal path failure.

rsaConnectionVcOutOfRangeFrmFromSubnet

This attribute displays the number of frames from subnet discarded due to out of sequence range for arriving too late.

rsaConnectionVcCombErrorsFromSubnet

This attribute records the number of subnet packets discarded at the sink Vc due to the Vc segmentation and combination protocol error. Usually, this occurs when the subnet discards packets and thus this statistics can be used to guest the number of subne ...

rsaConnectionVcDuplicatesFromSubnet

This attribute displays the number of subnet packets discarded due to duplication. Although packets are not retransmitted by the Frame Relay Vc, it is possible for the subnet to retransmit packets. When packets are out-of-sequenced and copies of the same ...

rsaConnectionVcNotDataXferFromSubnet

This attribute displays the number of subnet packets discarded when data transfer is suspended in Vc recovery.

rsaConnectionVcFrmLossTimeouts

This attribute displays the number of lost frame timer expiries. When this count is excessive, the network is very congested and packets have been discarded in the subnet.

rsaConnectionVcOoSeqByteCntExceeded

This attribute displays the number times that the out of sequence byte threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. We ...

rsaConnectionVcPeakOoSeqPktCount

This attribute displays the frame relay peak packet count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.

rsaConnectionVcPeakOoSeqFrmForwarded

This attribute displays the frame relay peak size of the sequence packet queue. The subnet may deliver packets out-of- sequenced. These packets are then queued in an out-of-sequenced queue, waiting for a packet with the expected sequence number to come. W ...

rsaConnectionVcSendSequenceNumber

This attribute displays the Vc internal packet's send sequence number. Note that a 'packet' in this context, may be either a user data packet, or an OAM frame.

rsaConnectionVcPktRetryTimeouts

This attribute displays the number of packets which have retransmission time-outs. When this count is excessive, the network is very congested and packets have been discarded in the subnet.

rsaConnectionVcPeakRetryQueueSize

This attribute displays the peak size of retransmission queue. This attribute is used as an indicator of the acknowledgment behavior across the subnet. Records the largest body of unacknowledged packets.

rsaConnectionVcSubnetRecoveries

This attribute displays the number of successful Vc recovery attempts.

rsaConnectionVcOoSeqPktCntExceeded

This attribute displays the number times that the out of sequence packet threshold is exceeded. When the threshold is exceeded, this condition is treated as if the loss frame timer has expired and all frames queued at the sink Vc are delivered to the AP. ...

rsaConnectionVcPeakOoSeqByteCount

This attribute displays the frame relay peak byte count of the out of sequence queue. This attribute records the maximum queue length of the out-of-sequenced queue. The counter can be used to deduce the message buffer requirement on a Vc.

rsaConnectionVcDmepTable

*** THIS TABLE CURRENTLY NOT IMPLEMENTED *** This attribute displays the data path used by the connection. Data path is provisioned in Dna and DirectCall components. If the connection is using dprsOnly data path, this attribute is empty. If the connection ...

rsaConnectionVcDmepEntry

An entry in the rsaConnectionVcDmepTable.

rsaConnectionVcDmepValue

This variable represents both the value and the index for the rsaConnectionVcDmepTable.