Nortel-Magellan-Passport-DisdnETSIMIB Download

dataSigChanEtsiRowStatusTable

This entry controls the addition and deletion of dataSigChanEtsi components.

dataSigChanEtsiRowStatusEntry

A single entry in the table represents a single dataSigChanEtsi component.

dataSigChanEtsiRowStatus

This variable is used as the basis for SNMP naming of dataSigChanEtsi components. These components can be added and deleted.

dataSigChanEtsiComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanEtsiStorageType

This variable represents the storage type value for the dataSigChanEtsi tables.

dataSigChanEtsiIndex

This variable represents the index for the dataSigChanEtsi tables.

dataSigChanEtsiL2Table

This group represents the provisionable Layer 2 attributes of the Q931 CCITT protocol.

dataSigChanEtsiL2Entry

An entry in the dataSigChanEtsiL2Table.

dataSigChanEtsiT23

This attribute specifies the layer2 enable request timer.

dataSigChanEtsiT200

This attribute specifies the maximum time between a layer 2 frame and its acknowledgement

dataSigChanEtsiN200

This attribute specifies the maximum number of re-transmissions of a layer2 frame.

dataSigChanEtsiT203

This attribute specifies the maximum time that a no layer 2 traffic situation can last. Expiry triggers a check on whether the far end is a live.

dataSigChanEtsiN201

This attribute specifies the maximum number of octets in an information field.

dataSigChanEtsiCircuitSwitchedK

This attribute specifies the maximum number of frames for B channel use.

dataSigChanEtsiProvTable

This group defines the general options of the d-channel signalling link.

dataSigChanEtsiProvEntry

An entry in the dataSigChanEtsiProvTable.

dataSigChanEtsiSide

This attribute specifies whether the layer 2 HDLC interface is the network or user side of the connection.

dataSigChanEtsiOperTable

This group provides the operational attributes for the signalling protocol.

dataSigChanEtsiOperEntry

An entry in the dataSigChanEtsiOperTable.

dataSigChanEtsiActiveChannels

This attribute indicates the number of currently active channels. This includes data and voice channels.

dataSigChanEtsiPeakActiveChannels

This attribute indicates the maximum number of channels that have been active on this signalling channel during the last polling period.

dataSigChanEtsiDChanStatus

This attribute indicates the state of the D-channel. outOfService means that there is no layer 2 or layer 3 connectivity to the PBX. establishing means that the signalling channel is attempting to stage the layer 2. established means that the layer 2 is e ...

dataSigChanEtsiToolsTable

This group contains a series of operational attributes which turn on and off several kinds of tracing.

dataSigChanEtsiToolsEntry

An entry in the dataSigChanEtsiToolsTable.

dataSigChanEtsiTracing

This attribute defines which types of tracing are active for this signalling channel. The tracing messages are sent to the debug stream. To see the messages the agentQueue attribute in Col/debug must be greater than 0 and a Telnet NMIS session must list ...

dataSigChanEtsiFramerRowStatusTable

This entry controls the addition and deletion of dataSigChanEtsiFramer components.

dataSigChanEtsiFramerRowStatusEntry

A single entry in the table represents a single dataSigChanEtsiFramer component.

dataSigChanEtsiFramerRowStatus

This variable is used as the basis for SNMP naming of dataSigChanEtsiFramer components. These components cannot be added nor deleted.

dataSigChanEtsiFramerComponentName

This variable provides the component's string name for use with the ASCII Console Interface

dataSigChanEtsiFramerStorageType

This variable represents the storage type value for the dataSigChanEtsiFramer tables.

dataSigChanEtsiFramerIndex

This variable represents the index for the dataSigChanEtsiFramer tables.

dataSigChanEtsiFramerProvTable

This group contains the base provisioning data for the Framer component. Application or hardware interface specific provisioning data is contained in other provisionable Framer groups.

dataSigChanEtsiFramerProvEntry

An entry in the dataSigChanEtsiFramerProvTable.

dataSigChanEtsiFramerInterfaceName

This attribute contains a hardware component name. The attribute associates the application with a specific link. This defines the module processor on which Framer's parent component (as well as Framer itself) will run.

dataSigChanEtsiFramerStateTable

This group contains the three OSI State attributes. The descriptions generically indicate what each state attribute implies about the component. Note that not all the values and state combinations described here are supported by every component which uses ...

dataSigChanEtsiFramerStateEntry

An entry in the dataSigChanEtsiFramerStateTable.

dataSigChanEtsiFramerAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

dataSigChanEtsiFramerOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

dataSigChanEtsiFramerUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

dataSigChanEtsiFramerStatsTable

This group contains the operational statistics data for a Framer component.

dataSigChanEtsiFramerStatsEntry

An entry in the dataSigChanEtsiFramerStatsTable.

dataSigChanEtsiFramerFrmToIf

This attribute counts the number of frames transmitted to the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerFrmFromIf

This attribute counts the number of frames received from the link interface by Framer. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerOctetFromIf

The number of bytes received from the link interface by Framer.

dataSigChanEtsiFramerAborts

This attribute counts the total number of aborts received. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerCrcErrors

This attribute counts the total number of frames with CRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerLrcErrors

This attribute counts the total number of frames with LRC errors. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerNonOctetErrors

This attribute counts the total number of frames that were non octet aligned. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerOverruns

This attribute counts the total number of frames received from the link for which overruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerUnderruns

This attribute counts the total number of frames transmitted to the link for which underruns occurred. This count wraps to zero after reaching its maximum value.

dataSigChanEtsiFramerLargeFrmErrors

This attribute counts the total number of frames received which were too large. The frame was longer than 500 bytes. This count wraps to zero after reaching its maximum value.