Nortel-Magellan-Passport-AtmTrunksMIB Download

trkAtmRowStatusTable

This entry controls the addition and deletion of trkAtm components.

trkAtmRowStatusEntry

A single entry in the table represents a single trkAtm component.

trkAtmRowStatus

This variable is used as the basis for SNMP naming of trkAtm components. These components can be added and deleted.

trkAtmComponentName

This variable provides the component's string name for use with the ASCII Console Interface

trkAtmStorageType

This variable represents the storage type value for the trkAtm tables.

trkAtmIndex

This variable represents the index for the trkAtm tables.

trkAtmProvTable

This group of provisionable attributes contains the parameters used by AtmAccess for monitoring link quality.

trkAtmProvEntry

An entry in the trkAtmProvTable.

trkAtmMaximumErroredInterval

This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the Unacknowledged, Utp, AtmAccess or FrAccess component can be degraded. Once the error interval coun ...

trkAtmReceiveErrorSensitivity

This attribute specifies the allowable error rate beyond which the AtmAccess component can be degraded if the error rate persists for a duration longer than the maximumErrorInterval. The threshold is expressed as a percentage. It is the ratio of the numbe ...

trkAtmAtmAccMaximumErroredInterval

This attribute specifies the interval time over which the error threshold (as specified by receiveErrorSensitivity) must be continuously exceeded before the AtmAccess component can be degraded. Once the error interval count exceeds the provisioned value, ...

trkAtmInterfaceTable

This group of attributes provides the parameters used by the AtmAccess component for specifying access to an ATM interface.

trkAtmInterfaceEntry

An entry in the trkAtmInterfaceTable.

trkAtmAtmConnection

This attribute specifies the component name of the ATM Layer 2 AAL5 interface that the AtmAccess component will use.

trkAtmBwElastic

This attribute specifies how changes in the bandwidth of the atmConnection are handled by the ATM software. If its value is no, the atmConnection will be released by the ATM software if it is incapable of providing the bandwidth specified by the peak cell ...

trkAtmVccReportingBw

This attribute specifies how the bandwidth of the VCC is reported to the parent Trunk component. If its value is pcr and attribute bwElastic of AtmAccess has a value of no, the peak cell rate (PCR) of the VCC, defined in txTrafficDescParm of AtmIf Vcc Vcd ...

trkAtmStateTable

This group contains the three OSI State attributes and the six OSI Status attributes. The descriptions generically indicate what each attribute implies about the component. Note that not all the values and state combinations described here are supported b ...

trkAtmStateEntry

An entry in the trkAtmStateTable.

trkAtmAdminState

This attribute indicates the OSI Administrative State of the component. The value locked indicates that the component is administratively prohibited from providing services for its users. A Lock or Lock - force command has been previously issued for this ...

trkAtmOperationalState

This attribute indicates the OSI Operational State of the component. The value enabled indicates that the component is available for operation. Note that if adminState is locked, it would still not be providing service. The value disabled indicates that t ...

trkAtmUsageState

This attribute indicates the OSI Usage State of the component. The value idle indicates that the component is not currently in use. The value active indicates that the component is in use and has spare capacity to provide for additional users. The value b ...

trkAtmAvailabilityStatus

If supported by the component, this attribute indicates the OSI Availability status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that ei ...

trkAtmProceduralStatus

If supported by the component, this attribute indicates the OSI Procedural status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that eith ...

trkAtmControlStatus

If supported by the component, this attribute indicates the OSI Control status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either ...

trkAtmAlarmStatus

If supported by the component, this attribute indicates the OSI Alarm status of the component. Note that, even though it is defined as a multi-valued set, at most one value is shown to the user. When no values are in the set, this indicates that either th ...

trkAtmStandbyStatus

If supported by the component, this attribute indicates the OSI Standby status of the component. The value notSet indicates that either the attribute is not supported or that none of the status conditions described below are present. Note that this is a n ...

trkAtmUnknownStatus

This attribute indicates the OSI Unknown status of the component. The value false indicates that all of the other OSI State and Status attribute values can be considered accurate. The value true indicates that the actual state of the component is not know ...

trkAtmUtilTable

This group contains all of the provisioning data required to set the ATM VCC utilization alarm thresholds. The ATM VCC utilization is indicated by the lastCalculatedVccUtilization attribute. All thresholds are percentages which can take on any value in th ...

trkAtmUtilEntry

An entry in the trkAtmUtilTable.

trkAtmMinorVccUtilAlarmThreshold

This attribute specifies the threshold value at which a minor alarm will be issued based on a sustained average ATM VCC utilization as indicated by the lastCalculatedVccUtilization attribute. The Set alarm is issued after 3 minutes of utilization greater ...

trkAtmMajorVccUtilAlarmThreshold

This attribute specifies the threshold value at which a major alarm will be issued based on a sustained average ATM VCC utilization as indicated by the lastCalculatedVccUtilization attribute. The Set alarm is issued after 3 minutes of utilization greater ...

trkAtmCriticalVccUtilAlarmThreshold

This attribute specifies the threshold value at which a critical alarm will be issued based on a sustained average ATM VCC utilization as indicated by the lastCalculatedVccUtilization attribute. The Set alarm is issued after 3 minutes of utilization great ...

trkAtmVccUtilAlarmStatus

This attribute provides control of the generation of ATM VCC utilization alarms. If the value is disabled, none of the alarms is generated (this is equivalent to setting all of the thresholds to 200%). If the value is enabled, the individual thresholds ar ...

trkAtmStatsTable

This group of attributes contains statistics collected by the AtmAccess component.

trkAtmStatsEntry

An entry in the trkAtmStatsTable.

trkAtmLastCalculatedVccUtilization

This attribute indicates the last calculated receive utilization of the ATM VCC. It is calculated every 30 seconds based on comparing the number of cells received by the AtmIf Vcc with the estimated available bandwidth on the AtmIf Vcc.

trkAtmLastCalculatedTxVccUtilization

This attribute indicates the last calculated transmit utilization of the ATM VCC. It is calculated every 30 seconds based on comparing the number of cells transmitted by the AtmIf Vcc with the estimated available bandwidth on the AtmIf Vcc.