Nortel-Magellan-Passport-AlarmMIB

Nortel-Magellan-Passport-AlarmMIB Download

MIBs list

This MIB module specifies the variables and notifications used to implement the Passport Alarms reporting facility.

IPHost Network Monitor offer an easy way of SNMP monitoring your Nortel network devices, Firewalls, Repeaters.

OID list for Nortel-Magellan-Passport-AlarmMIB

componentRowPointer
A pointer to the RowStatus variable of the component emitting the alarm.
componentName
The textual name of the component emitting the alarm in a format suitable for use in commands entered on the `console'. It includes the name of the node from which the alarm was sent, as specified in `ModuleData nodeName'.
eventTime
The date and time at which the alarmed event occurred.
activeListStatus
The active alarm list status. This may be used by the Manager to add (on receiving a set) and delete (on receiving a clear) alarms from the alarm displays.
severity
The severity of the alarm which should indicate what priority that fixing this problem should be given. All values are OSI-defined; refer to CCITT X.733/ISO 10164-4 for a more complete description.
alarmType
The alarm type field as defined by OSI which is used to indicate a broad category of what is wrong. The first 6 values are OSI-defined; refer to CCITT X.733/ISO 10164-4 (for the first 5) and CCITT X.736/ISO 10164-4 (for the last) for a more complete desc ...
probableCause
The probable cause for the alarm which usually qualifies the Alarm Type field. Most values are OSI-defined; refer refer to CCITT X.733 and X.736 (ISO 10164-4 and 10164-7) for a more complete description.
ntpIndex
An 8-digit code which is an index into an NTP to provide more description of the alarm and possible actions to take. The first 4 digits indicate a 'group' of alarms (belonging to a particular subsystem or component, etc.). The last 4 digits are a subindex ...
commentData
Additional textual information for the network operator to use. It contains only ASCII characters. Note: The total number of bytes in commentData, operatorData, and internalData may not exceed 750 bytes.
notificationID
The notification Id of the alarm. The high-order byte is the card number of the card from which this alarm originated. The low-order 24 bits contain a sequence number which increases each time an alarm is generated. Thus, this id provides a simple way of ...
lpForHierClear
A pointer to the RowStatus variable of the Logical Processor the component generating the alarm is running on. A component generating an Alarm with `activeListStatus = set' can include this variable in the Alarm. If the identified Logical Processor gener ...
operatorData
Additional hexadecimal information for the network operator to use. Note: The total number of bytes in commentData, operatorData, and internalData may not exceed 750 bytes.
pid
A string representation of the internal process id (Pid) of the process which generated the alarm (for internal use only). Note that it may or may not map to the componentName field.
fileName
An internal filename (for internal use only).
fileLineNumber
An internal line number in the file (see filename) referred to above (for internal use only).
fileVersion
A version indicator of the file (filename) referred to above (for internal use only).
internalData
An additional internal hexadecimal information for internal use only. Note: The total number of bytes in comment, operator, and internal data may not exceed 750 bytes.
cid
This is a Custom Identifier(CID) of the component which generated the alarm

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list