NETGEAR-ROUTING-MIB

NETGEAR-ROUTING-MIB Download

MIBs list

The NETGEAR Private MIB for Routing

IPHost Network Monitor offer an easy way of SNMP monitoring your NETGEAR Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for NETGEAR-ROUTING-MIB

agentSwitchArpAgeoutTime
Configures the ARP entry ageout time in seconds. Allowable range: 15-21600
agentSwitchArpResponseTime
Configures the ARP request response timeout in seconds. Allowable range: 1-10
agentSwitchArpMaxRetries
Configures the ARP count of maximum request for retries. Allowable range: 0-10
agentSwitchArpCacheSize
Configures the ARP maximum number of entries in the cache. Allowable range is platform-specific.
agentSwitchArpDynamicRenew
This indicates the current setting of ARP dynamic renew mode.
agentSwitchArpTotalEntryCountCurrent
Current number of entries in the ARP cache.
agentSwitchArpTotalEntryCountPeak
Peak number of entries recorded in the ARP cache over time. This value is restarted whenever the ARP cache size is changed.
agentSwitchArpStaticEntryCountCurrent
Current number of configured static ARP entries.
agentSwitchArpStaticEntryCountMax
Maximum number of configurable static ARP entries.
agentSwitchArpTable
This table augments the MIB-II ipNetToMediaTable by providing per-interface ARP entry information.
agentSwitchArpEntry
agentSwitchArpAge
This defines the time (in seconds) since the ARP entry was last refreshed. This value is 0 for ARP entries of type local(1) or static(3), since these entries are not subject to aging.
agentSwitchArpIpAddress
The IP Address assigned to each interface.
agentSwitchArpMacAddress
The hardware MAX Address that each interface maps to.
agentSwitchArpInterface
The Associated IfIndex which identified the ARP Entry.
agentSwitchArpType
The type of ARP entry.
agentSwitchArpStatus
The status of this ARP entry. Setting this object destroy will remove the entry.
agentSwitchIpRoutingMode
Administratively enables/disables routing on the switch.
agentSwitchIpInterfaceTable
agentSwitchIpInterfaceEntry
agentSwitchIpInterfaceIfIndex
The IfIndex associated with this instance.
agentSwitchIpInterfaceIpAddress
The IpAddress assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceNetMask must be set at the same time.
agentSwitchIpInterfaceNetMask
The NetMask assigned to this interface. When setting this value, the value of agentSwitchIpInterfaceIpAddress must be set at the same time.
agentSwitchIpInterfaceClearIp
Sets the interfaces IpAddress and NetMask back to 0.0.0.0
agentSwitchIpInterfaceRoutingMode
Enables or disables routing for this interface.
agentSwitchIpInterfaceProxyARPMode
Enables or disables Proxy ARP for this interface.
agentSwitchIpInterfaceMtuValue
Configures the MTU value for this interface. If the value returned is 0 this interface is not enabled for routing. It is not valid to set this value to 0 if routing is enabled.
agentSwitchIpRouterDiscoveryTable
There is no global administrative flag for router discovery. The global routing flag (agentSwitchIpRoutingMode) will be used for this purpose. If routing is disabled, router discovery is disabled as well.
agentSwitchIpRouterDiscoveryEntry
agentSwitchIpRouterDiscoveryIfIndex
Interface Number to configure Router Discovery on.
agentSwitchIpRouterDiscoveryAdvertiseMode
Enable or disable router discovery on the interface.
agentSwitchIpRouterDiscoveryMaxAdvertisementInterval
Maximum time allowed between sending router advertisements from the interface.
agentSwitchIpRouterDiscoveryMinAdvertisementInterval
Minimum time allowed between sending router advertisements from the interface. This value must be less than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
agentSwitchIpRouterDiscoveryAdvertisementLifetime
Value of lifetime field of router advertsisement sent from the interface. This value must be greater than or equal to agentSwitchIpRouterDiscoveryMaxAdvertisementInterval.
agentSwitchIpRouterDiscoveryPreferenceLevel
Preferability of the address as a default router address, related to other addresses on the same subnet. This is defined as the larger the number, the higher the preference.
agentSwitchIpRouterDiscoveryAdvertisementAddress
Address used when sending router advertisements from the interface.
agentSwitchIpVlanTable
agentSwitchIpVlanEntry
A Static VLAN for which routing can be enabled/disabled
agentSwitchIpVlanId
The Vlan's Id.
agentSwitchIpVlanIfIndex
The IfIndex associated with this VLAN.
agentSwitchIpVlanRoutingStatus
Status of Routing mode per Vlan. active(1) - Vlan is enabled for routing createAndGo(4) - Adds Vlan entry for routing destroy(6) - Removes Vlan from routing
agentSwitchSecondaryAddressTable
Contains a list of secondary IP Addresses associated with an interface.
agentSwitchSecondaryAddressEntry
A secondary IP Address for a given interface. This IP Address must not conflict with the IP Address configured in the agentSwitchIpInterfaceTable.
agentSwitchSecondaryIpAddress
The Secondary IP Address assigned to this interface.
agentSwitchSecondaryNetMask
The Secondary Net Mask assigned to this interface. This value must be set during creation, and can not be changed.
agentSwitchSecondaryStatus
Creates a new entry in the Secondary Address table. Allowed values are: createAndGo(4) - Creates an entry in this table, associating the address with a given interface. The agentSwitchSecondaryNetMask object must be set during creation. destroy(6) ...
agentRouterRipAdminState
Sets the administrative mode of RIP in the router.
agentRouterRipSplitHorizonMode
Sets the RIP split horizon operating mode in the router. A value of none(1) means split horizon processing is disabled. When set to simple(2), the simple split horizon technique is used. When set to poisonReverse(3), the split horizon with poison revers ...
agentRouterRipAutoSummaryMode
Sets the RIP auto summarization mode in the router. A value of enable(1) means that routes advertized by this RIP router are combined, or summarized, whenever possible into aggregates. When set to disable(2), routes are not aggregated in RIP updates gener ...
agentRouterRipHostRoutesAcceptMode
Sets the RIP host route acceptance mode in the router. A value of enable(1) means that host routes advertized to this RIP router will be accepted (learned) into its routing table. When set to disable(2), host routes advertized in RIP updates from neighbo ...
agentRouterRipDefaultMetric
Default metric of redistributed routes, when RIP redistributes from other protocols.
agentRouterRipDefaultMetricConfigured
Flag to determine whether RIP default-metric is configured or not.
agentRouterRipDefaultInfoOriginate
Flag to determine, whether RIP can advertise a default-route learned from another protocol.
agentRipRouteRedistTable
This table contains the MIB objects required to configure route-redistribution for RIP. Here, RIP is the Destination protocol and the source protocols can be any of : BGP, OSPF, Static, Connected.
agentRipRouteRedistEntry
agentRipRouteRedistSource
Source route, from which RIP can redistribute routes. This object also acts as the identifier for the RIP redistribution Table entry.
agentRipRouteRedistMode
User enabels/disables route-redistribution for a particular source protocol.
agentRipRouteRedistMetric
Metric used for redistributing a particular source protocol route into RIP.
agentRipRouteRedistMetricConfigured
Flag to determine whether RIP redistribute-metric is configured or not.
agentRipRouteRedistMatchInternal
If this flag is true, RIP redistributes OSPF internal routes. It will be non-applicable, when source protocol is other than ospf.
agentRipRouteRedistMatchExternal1
If this flag is true, RIP redistributes OSPF External1 routes. It will be non-applicable, when source protocol is other than ospf.
agentRipRouteRedistMatchExternal2
If this flag is true, RIP redistributes OSPF External2 routes. It will be non-applicable, when source protocol is other than ospf.
agentRipRouteRedistMatchNSSAExternal1
If this flag is true, RIP redistributes OSPF NSSA-External1 routes. It will be non-applicable, when source protocol is other than ospf.
agentRipRouteRedistMatchNSSAExternal2
If this flag is true, RIP redistributes OSPF NSSA-External2 routes. It will be non-applicable, when source protocol is other than ospf.
agentRipRouteRedistDistList
Access-list number of the access-list, which filters routes received from a source-protocol.
agentRipRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
agentRip2IfConfTable
A list of subnets which require separate configuration in RIP. Augments rip2IfConfTable in the RIPv2-MIB.
agentRip2IfConfEntry
A Single Routing Domain in a single Subnet. Augments rip2IfConfEntry in RIPv2-MIB.
agentRip2IfConfAuthKeyId
The identifier for the authentication key used on this interface. This field is only meaningful when the RIPv2-MIB rip2IfConfAuthType is md5(3); otherwise, the value is not used.
agentOspfDefaultMetric
Default metric of redistributed routes, when OSPF redistributes from other protocols.
agentOspfDefaultMetricConfigured
Flag to determine whether OSPF default-metric is configured or not.
agentOspfDefaultInfoOriginate
Flag to determine, whether OSPF can advertise a default-route learned from another protocol.
agentOspfDefaultInfoOriginateAlways
When this flag is true, the router advertises 0.0.0.0/0.0.0.0 always. Without this option, OSPF will only advertise 0.0.0.0/0.0.0.0 if the router's forwarding table contains a default route.
agentOspfDefaultInfoOriginateMetric
Metric of the default route,which OSPF advertises when learned from other protocol.
agentOspfDefaultInfoOriginateMetricConfigured
Flag to determine whether OSPF default-info originate metric is configured or not.
agentOspfDefaultInfoOriginateMetricType
Metric Type of the default route,which OSPF advertises when learned from other protocol. It can be 1(external type 1) or 2(external type 2).
agentOspfRouteRedistTable
This table contains the MIB objects required to configure route-redistribution for OSPF. Here, OSPF is the Destination protocol and the source protocols can be any of : BGP, RIP, Static, Connected.
agentOspfRouteRedistEntry
agentOspfRouteRedistSource
Source protocol, from which OSPF can redistribute routes. This object also acts as the identifier for the OSPF redistribution Table entry.
agentOspfRouteRedistMode
User enabels/disables route-redistribution for a particular source protocol.
agentOspfRouteRedistMetric
Metric used for redistributing a particular source protocol route into OSPF.
agentOspfRouteRedistMetricConfigured
Flag to determine whether OSPF redistribute-metric is configured or not.
agentOspfRouteRedistMetricType
Metric Type of routes,which OSPF redistributes from other source protocols. It can be 1(external type 1) or 2(external type 2).
agentOspfRouteRedistTag
It specifies the tag field in routes redistributed by OSPF.
agentOspfRouteRedistSubnets
If this value is false, then OSPF will not redistribute subnetted routes.
agentOspfRouteRedistDistList
Access-list number of the access-list, which filters routes received from a source-protocol.
agentOspfRouteRedistDistListConfigured
Flag to determine whether Access-list is configured or not.
agentOspfIfTable
The OSPF Interface Table describes the inter- faces from the viewpoint of OSPF. Augments ospfIfTable from the OSPF-MIB.
agentOspfIfEntry
The OSPF Interface Entry describes one inter- face from the viewpoint of OSPF. Augments ospfIfEntry in OSPF-MIB.
agentOspfIfAuthKeyId
The identifier for the authentication key used on this interface. This field is only meaningful when the OSPF-MIB ospfIfAuthType is md5(2); otherwise, the value is not used.
agentOspfIfIpMtuIgnoreFlag
Configures the IP MTU Ignore Flag value for this OSPF interface.
agentOspfVirtIfTable
Information about this router's virtual inter- faces. Augments ospfVirtIfTable from the OSPF-MIB.
agentOspfVirtIfEntry
Information about a single Virtual Interface. Augments ospfVirtIfEntry in OSPF-MIB.
agentOspfVirtIfAuthKeyId
The identifier for the authentication key used on this virtual interface. This field is only meaningful when the OSPF-MIB ospfVirtIfAuthType is md5(2); otherwise, the value is not used.
agentRouterOspfRFC1583CompatibilityMode
From RFC2328: Controls the preference rules used in Section 16.4 when choosing among multiple AS-external-LSAs advertising the same destination. When set to 'enabled', the preference rules remain those specified by RFC 1583 ([Ref9]). When set to 'disabled ...
agentSnmpVRRPNewMasterTrapFlag
This flag enables the sending of VRRP new master notification traps.
agentSnmpVRRPAuthFailureTrapFlag
This flag enables the sending of VRRP authentication failure notification traps.
agentBootpDhcpRelayMaxHopCount
The BOOTP/DHCP Max Hop Count. The relay agent silently discards BOOTREQUEST messages whose hops field exceeds the value 16 assuming that the request is looped through the intermediate agents. The default value is 4.
agentBootpDhcpRelayForwardingIp
The BOOTP/DHCP Server IP Address. All the requests will be forwarded and the replies expected from this address.
agentBootpDhcpRelayForwardMode
The BOOTP/DHCP Admin Mode. The relaying functionality can be administratively enabled or disabled by this object
agentBootpDhcpRelayMinWaitTime
The BOOTP/DHCP Minimum Wait Time. When the BOOTP relay agent receives a BOOTREQUEST message, it MAY use the value of the 'secs' (seconds since client began booting) field of the request as a factor in deciding whether to relay the request or not.
agentBootpDhcpRelayCircuitIdOptionMode
The BOOTP/DHCP Circuit ID Option Mode. This flag is set to enable/disable the network element to add/remove the DHCP Relay agent Circuit ID sub-options.
agentBootpDhcpRelayNumOfRequestsReceived
The Number of BOOTP/DHCP Requests Received. Total number of BOOTREQUESTs received from all clients.
agentBootpDhcpRelayNumOfRequestsForwarded
The Number of BOOTP/DHCP Requests Forwarded. Total number of BOOTREQUESTs forwarded to the next agents/servers.
agentBootpDhcpRelayNumOfDiscards
The Number of BOOTP/DHCP Discards. Total number of packets discarded by the network element because of error in the packet.
agentECMPOspfMaxPaths
It sets the number of paths that OSPF can report for a given destination where maxpaths is platform-dependent.

MIBs list