Mac-Based-Authentication-MIB Download

--swMacBasedAuthRelativeVLAN

-- "This object indicates the associated VLAN name of the authentication method. Used to delete the guest VLAN of MAC-based Access Control.

swMacBasedAuthState

This object enables or disables the MAC-based Access Control status of the device.

swMacBasedAuthMethod

This object indicates the type of authentication method. The RADIUS method is authenticated per authentication server.

swMacBasedAuthPWD

This object indicates the password of the RADIUS authentication method.

swMacBasedAuthVlanName

This object indicates the VLAN name of the MAC-based Access Control guest VLAN.

swMacBasedAuthMemberPorts

This object indicates the member ports of the MAC-based Access Control guest VLAN.

swMacBasedAuthClearAllAction

Used to clear the authentication state of all ports.

swMacBasedAuthMaxUser

This object indicates the maximum number of authorized client(s) on the whole device. Note: The maximum number of the authorized client(s) range is (0..N). The value N means the maximum number. This is determined by the project itself. When 0 is set, the ...

swMacBasedAuthFailOver

This object sets the RADIUS authentication failover state. When the authentication failover is disabled and if the RADIUS servers are unreachable, the authentication will fail. When the authentication failover is enabled and if the RADIUS servers authenti ...

swMacBasedAuthRadiusAuthorization

This object sets the acceptance state of RADIUS authorization. When the authorization is enabled for MAC-based Access Control's RADIUS method, the authorized attributes (for example VLAN, 802.1p default priority, and ACL) assigned by the local database wi ...

swMacBasedAuthLocalAuthorization

This object sets the acceptance state of local authorization. When the authorization is enabled for MAC-based Access Control's local method, the authorized attributes assigned by the local database will be accepted if the global authorization state is ena ...

swMacBasedAuthTrapState

This object is used to enable or disable sending of MAC-based Access Control traps.

swMacBasedAuthLogState

This object is used to enable or disable the generating of MAC-based Access Control logs.

swMacBasedAuthPortInfoTable

A table that displays the authentication state of every port.

swMacBasedAuthPortInfoEntry

A table that displays the authentication state for each port.

swMacBasedAuthInfoPortIndex

This object indicates the authenticated port number.

swMacBasedAuthInfoMacIndex

This object indicates the authenticated MAC address.

swMacBasedAuthInfoStatus

This object indicates the authenticated status.

swMacBasedAuthInfoAssignVLANName

This object indicates the VLAN name that the port is assigned to once MAC authentication was successful.

swMacBasedAuthClearMacAction

When set to start (2), the user will return to an un-authenticated state. All the timers associated with the user will be reset. When the administrator performs a get operation, it always returns the other (1). ::= { swMacBasedAuthPortInfoEntry 5 } SYNTAX ...

swMacBasedAuthInfoAgingTime

This object indicates the remaining time until the authenticated client returns to an unauthenticated state. -1 will be displayed before the port or MAC address passes authentication. 0 will be displayed when the aging time is set to infinite on the port. ...

swMacBasedAuthInfoBlockTime

This object indicates the remaining time until the authentication failure client is allowed to start a new authentication. -1 will be displayed after the port or MAC address passes authentication. -2 indicates the host block timeout, but MAC-based Access ...

swMacBasedAuthInfoAssignVID

This object indicates the VID that the port is assigned to once The MAC authentication was successful.

swMacBasedAuthStateTable

This table contains the MAC-based Access Control clients' authentication information.

swMacBasedAuthStateEntry

This list contains the MAC-based Access Control host's authentication information.

swMacBasedAuthStatePort

Specifies the MAC-based Access Control host's port number.

swMacBasedAuthStateOriginalVID

Specifies the MAC-based Access Control host's original received VLAN ID.

swMacBasedAuthStateMacAddr

Specifies the MAC-based Access Control host's MAC address.

swMacBasedAuthStateAuthStatus

Specifies the MAC-based Access Control host's authentication state.

swMacBasedAuthStateAssignVID

Specifies the MAC-based Access Control host's assign VLAN ID.

swMacBasedAuthStateAssignPriority

Specifies the MAC-based Access Control host's priority assigned when it passes authentication. -1 indicates the host has no priority assigned.

swMacBasedAuthStateRemainTime

Specifies the remaining MAC-based Access Control host's aging or block time. When host's authentication state is 'authenticated' in swMacBasedAuthStateAuthStatus, this object indicates the host's aging time, the units is minutes. When host's authenticatio ...

swMacBasedAuthStateDelAction

Used to delete the specified authentication entry. Setting start(2) will delete this MAC-based Access Control host entry. ::= { swMacBasedAuthStateEntry 25 } -- ----------------------------------------------------------------------------- -- swMBAPortMgmt ...

swMacBasedAuthPortEntry

A list of method types and states for each port.

swMacBasedAuthPortIndex

This object indicates the module's port number.

swMacBasedAuthPortState

This object enables or disables the authentication state of this port.

swMacBasedAuthPortMode

This object specifies the mode of this entry. port_based: All users connected to a port share the first authentication result. host_based: Each user can have its own authentication result. DEFVAL {port_based} ::= { swMacBasedAuthPortEntry 3 } SYNTAX ...

swMacBasedAuthDatabaseTable

A table that contains the MAC-based Access Control account information.

swMacBasedAuthDatabaseEntry

A list that contains the MAC-based Access Control account information.

swMacBasedAuthDatabaseMacIndex

This object indicates the MAC address for this user account.

swMacBasedAuthDatabaseVlanName

This object indicates the VLAN name for this user account.

swMacBasedAuthDatabaseStatus

The status of this entry.

swMacBasedAuthDatabaseVID

This object indicates the VID for this user account. 0 indicates to delete the configured VID in this user account.

swMacBasedAuthVID

The VLAN ID for the host already exists.