JUNIPER-OSPFV3-MIB

JUNIPER-OSPFV3-MIB Download

MIBs list

The MIB module for OSPF version 3.

With the IPHost SNMP tool, you can monitor any SNMP objects of the JUNIPER-OSPFV3-MIB.

OID list for JUNIPER-OSPFV3-MIB

jnxOspfv3RouterId
A 32-bit integer uniquely identifying the router in the Autonomous System. To ensure uniqueness, this may default to the value of one of the router's IPv4 host addresses, represented as a 32-bit unsigned integer, if IPv4 is configured on the router.
jnxOspfv3AdminStat
The administrative status of OSPFv3 in the router. The value 'enabled' denotes that the OSPFv3 Process is active on at least one interface; 'disabled' disables it on all interfaces.
jnxOspfv3VersionNumber
The version number of OSPF for IPv6 is 3.
jnxOspfv3AreaBdrRtrStatus
A flag to note whether this router is an area border router.
jnxOspfv3ASBdrRtrStatus
A flag to note whether this router is configured as an Autonomous System border router.
jnxOspfv3AsScopeLsaCount
The number of AS-Scope (e.g. AS-External) link state advertisements in the link state database.
jnxOspfv3AsScopeLsaCksumSum
The 32-bit unsigned sum of the LS checksums of the AS-scoped link state advertisements contained in the link state database. This sum can be used to determine if there has been a change in a router's link state database, and to compare the link state data ...
jnxOspfv3OriginateNewLsas
The number of new link-state advertisements that have been originated. This number is incremented each time the router originates a new LSA.
jnxOspfv3RxNewLsas
The number of link state advertisements received determined to be new instantiations. This number does not include newer instantiations of self-originated link state advertisements.
jnxOspfv3ExtLsaCount
The number of External(LS type 0x4005) in the link state database
jnxOspfv3ExtAreaLsdbLimit
The maximum number of non-default AS-external-LSAs entries that can be stored in the link state database. If the value is -1, then there is no limit. When the number of non-default AS-external-LSAs in a router's link-state database reaches ospfv3ExtAreaLs ...
jnxOspfv3MulticastExtensions
A Bit Mask indicating whether the router is forwarding IPv6 multicast datagrams based on the algorithms defined in the Multicast Extensions to OSPF. If intraAreaMulticast set, indicates that the router can forward IPv6 multicast datagrams in the router's ...
jnxOspfv3ExitOverflowInterval
The number of seconds that, after entering Overflow State, a router will attempt to leave Overflow State. This allows the router to again originate non-default, AS-External-LSAs. When set to 0, the router will not leave Overflow State until restarted.
jnxOspfv3DemandExtensions
The router's support for demand routing.
jnxOspfv3ReferenceBandwidth
Reference bandwidth in kilobits/second for calculating default interface metrics. The default value is 100,000 KBPS (100 MBPS)
jnxOspfv3RestartSupport
The router's support for OSPF Graceful restart. Options include: no restart support, only planned restarts or both planned and unplanned restarts.
jnxOspfv3RestartInterval
Configured OSPF Graceful restart timeout interval.
jnxOspfv3RestartStatus
The current status of OSPF Graceful restart capability.
jnxOspfv3RestartAge
Remaining time in current OSPF Graceful restart interval.
jnxOspfv3RestartExitRc
Describes the outcome of the last attempt at a Graceful restart. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently underway. completed:.......the last restart completed successfully. timedOut:........the l ...
jnxOspfv3NotificationEnable
If this object is set to true(1), then it enables the generation of OSPFv3 Notifications. If it is set to false(2), these notifications are not generated. Configured values MUST survive an agent reboot.
jnxOspfv3AreaTable
Information describing the configured parameters and cumulative statistics of the router's attached areas. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3AreaEntry
Information describing the configured parameters and cumulative statistics of one of the router's attached areas.
jnxOspfv3AreaId
A 32-bit integer uniquely identifying an area. Area ID 0 is used for the OSPFv3 backbone.
jnxOspfv3ImportAsExtern
Indicates whether an area is a Stub area, NSSA, or standard area. AS-scope LSAs are not imported into Stub Areas or NSSAs. NSSAs import AS-External data as NSSA LSAs which have Area-scope
jnxOspfv3AreaSpfRuns
The number of times that the intra-area route table has been calculated using this area's link state database. This is typically done using Dijkstra's algorithm.
jnxOspfv3AreaBdrRtrCount
The total number of area border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
jnxOspfv3AreaAsBdrRtrCount
The total number of Autonomous System border routers reachable within this area. This is initially zero, and is calculated in each SPF Pass.
jnxOspfv3AreaScopeLsaCount
The total number of Area-Scope link state advertisements in this area's link state database.
jnxOspfv3AreaScopeLsaCksumSum
The 32-bit unsigned sum of the Area-Scope link state advertisements' LS checksums contained in this area's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link-state da ...
jnxOspfv3AreaSummary
The variable ospfv3AreaSummary controls the import of Inter-Area LSAs into stub and NSSA areas. It has no effect on other areas. If it is noAreaSummary, the router will neither originate nor propagate Inter-Area LSAs into the stub or NSSA area. It will re ...
jnxOspfv3AreaStatus
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
jnxOspfv3StubMetric
The metric value advertised for the default route into Stub and NSSA areas.
jnxOspfv3AreaNssaTranslatorRole
Indicates an NSSA Border router's ability to perform NSSA translation of NSSA-LSAs into AS-External-LSAs.
jnxOspfv3AreaNssaTranslatorState
Indicates if and how an NSSA Border router is performing NSSA translation of NSSA-LSAs into AS-External-LSA's. When this object is set to enabled, the NSSA Border router's ospfv3AreaNssTranslatorRole has been set to always. When this object is set to elec ...
jnxOspfv3AreaNssaTranslatorStabInt
The number of seconds after an elected translator determines its services are no longer required, that it should continue to perform its translation duties.
jnxOspfv3AreaNssaTranslatorEvents
Indicates the number of Translator State changes that have occurred since the last boot-up.
jnxOspfv3AreaStubMetricType
This variable displays the type of metric advertised as a default route.
jnxOspfv3AsLsdbTable
The OSPFv3 Process's AS-Scope Link State Database. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3AsLsdbEntry
A single AS-Scope Link State Advertisement.
jnxOspfv3AsLsdbType
The type of the link state advertisement. Each link state type has a separate advertisement format. AS-Scope LSAs not recognized by the router may be stored in the database.
jnxOspfv3AsLsdbRouterId
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
jnxOspfv3AsLsdbLsid
The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
jnxOspfv3AsLsdbSequence
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
jnxOspfv3AsLsdbAge
This field is the age of the link state advertisement in seconds.
jnxOspfv3AsLsdbChecksum
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for IS ...
jnxOspfv3AsLsdbAdvertisement
The entire Link State Advertisement, including its header.
jnxOspfv3AsLsdbTypeKnown
Indicates whether the LSA type is recognized by this Router.
jnxOspfv3AreaLsdbTable
The OSPFv3 Process's Area-Scope Link State Database. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3AreaLsdbEntry
A single Area-Scope Link State Advertisement.
jnxOspfv3AreaLsdbAreaId
The 32-bit identifier of the Area from which the LSA was received.
jnxOspfv3AreaLsdbType
The type of the link state advertisement. Each link state type has a separate advertisement format. Area-Scope LSAs unrecognized by the router are also stored in this database.
jnxOspfv3AreaLsdbRouterId
The 32-bit number that uniquely identifies the originating router in the Autonomous System.
jnxOspfv3AreaLsdbLsid
The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
jnxOspfv3AreaLsdbSequence
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
jnxOspfv3AreaLsdbAge
This field is the age of the link state advertisement in seconds.
jnxOspfv3AreaLsdbChecksum
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for IS ...
jnxOspfv3AreaLsdbAdvertisement
The entire Link State Advertisement, including its header.
jnxOspfv3AreaLsdbTypeKnown
Indicates whether the LSA type is recognized by this Router.
jnxOspfv3LinkLsdbTable
The OSPFv3 Process's Link-Scope Link State Database. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3LinkLsdbEntry
A single Link-Scope Link State Advertisement.
jnxOspfv3LinkLsdbIfIndex
The identifier of the link from which the LSA was received.
jnxOspfv3LinkLsdbIfInstId
The identifier of the interface instance from which the LSA was received.
jnxOspfv3LinkLsdbType
The type of the link state advertisement. Each link state type has a separate advertisement format. Link-Scope LSAs unrecognized by the router are also stored in this database.
jnxOspfv3LinkLsdbRouterId
The 32 bit number that uniquely identifies the originating router in the Autonomous System.
jnxOspfv3LinkLsdbLsid
The Link State ID is an LS Type Specific field containing a unique identifier; it identifies the piece of the routing domain that is being described by the advertisement. In contrast to OSPFv2, the LSID has no addressing semantics.
jnxOspfv3LinkLsdbSequence
The sequence number field is a signed 32-bit integer. It is used to detect old and duplicate link state advertisements. The space of sequence numbers is linearly ordered. The larger the sequence number the more recent the advertisement.
jnxOspfv3LinkLsdbAge
This field is the age of the link state advertisement in seconds.
jnxOspfv3LinkLsdbChecksum
This field is the checksum of the complete contents of the advertisement, excepting the age field. The age field is excepted so that an advertisement's age can be incremented without updating the checksum. The checksum used is the same that is used for IS ...
jnxOspfv3LinkLsdbAdvertisement
The entire Link State Advertisement, including its header.
jnxOspfv3LinkLsdbTypeKnown
Indicates whether the LSA type is recognized by this Router.
jnxOspfv3HostTable
The list of Hosts, and their metrics, that the router will advertise as host routes. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3HostEntry
A metric to be advertised when a given host is reachable.
jnxOspfv3HostAddressType
The address type of ospfv3HostAddress. Only IPv6 addresses without zone index are expected.
jnxOspfv3HostAddress
The IPv6 Address of the Host. Must be a Global address.
jnxOspfv3HostMetric
The Metric to be advertised.
jnxOspfv3HostStatus
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
jnxOspfv3HostAreaID
The Area the Host Entry is to be found within. By default, the area that a subsuming OSPFv3 interface is in, or Area 0
jnxOspfv3IfTable
The OSPFv3 Interface Table describes the interfaces from the viewpoint of OSPFv3. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3IfEntry
The OSPFv3 Interface Entry describes one interface from the viewpoint of OSPFv3.
jnxOspfv3IfIndex
The interface index of this OSPFv3 interface. It corresponds to the interface index of the IPv6 interface on which OSPFv3 is configured.
jnxOspfv3IfInstId
Enables multiple interface instances of OSPFv3 to be run over a single link. Each protocol instance would be assigned a separate ID. This ID has local link significance only.
jnxOspfv3IfAreaId
A 32-bit integer uniquely identifying the area to which the interface connects. Area ID 0 is used for the OSPFv3 backbone.
jnxOspfv3IfType
The OSPFv3 interface type.
jnxOspfv3IfAdminStat
The OSPFv3 interface's administrative status. The value formed on the interface, and the interface will be advertised as an internal route to some area. The value 'disabled' denotes that the interface is external to OSPFv3.
jnxOspfv3IfRtrPriority
The priority of this interface. Used in multi-access networks, this field is used in the designated router election algorithm. The value 0 signifies that the router is not eligible to become the designated router on this particular network. In the event o ...
jnxOspfv3IfTransitDelay
The estimated number of seconds it takes to transmit a link state update packet over this interface.
jnxOspfv3IfRetransInterval
The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets.
jnxOspfv3IfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for all routers attached to a common network.
jnxOspfv3IfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down on the interface. This should be some multiple of the Hello interval. This value must be the same for all routers attached to a common netw ...
jnxOspfv3IfPollInterval
The larger time interval, in seconds, between the Hello packets sent to an inactive non-broadcast multi-access neighbor.
jnxOspfv3IfState
The OSPFv3 Interface State.
jnxOspfv3IfDesignatedRouter
The Router ID of the Designated Router.
jnxOspfv3IfBackupDesignatedRouter
The Router ID of the Backup Designated Router.
jnxOspfv3IfEvents
The number of times this OSPF interface has changed its state, or an error has occurred.
jnxOspfv3IfStatus
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
jnxOspfv3IfMulticastForwarding
The way multicasts should forwarded on this interface; not forwarded, forwarded as data link multicasts, or forwarded as data link unicasts. Data link multicasting is not meaningful on point to point and NBMA interfaces, and setting ospfv3MulticastForward ...
jnxOspfv3IfDemand
Indicates whether Demand OSPFv3 procedures (hello suppression to FULL neighbors and setting the DoNotAge flag on propagated LSAs) should be performed on this interface.
jnxOspfv3IfMetricValue
The metric assigned to this interface. The default value of the Metric is Reference Bandwidth / ifSpeed. The value of the reference bandwidth is configured by the ospfv3ReferenceBandwidth object.
jnxOspfv3IfLinkScopeLsaCount
The total number of Link-Scope link state advertisements in this link's link state database.
jnxOspfv3IfLinkLsaCksumSum
The 32-bit unsigned sum of the Link-Scope link state advertisements' LS checksums contained in this link's link state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link state da ...
jnxOspfv3IfDemandNbrProbe
Indicates whether or not neighbor probing is enabled to determine whether or not the neighbor is inactive. Neighbor probing is disabled by default.
jnxOspfv3IfDemandNbrProbeRetxLimit
The number of consecutive LSA retransmissions before the neighbor is deemed inactive and the neighbor adjacency is brought down.
jnxOspfv3IfDemandNbrProbeInterval
Defines how often the neighbor will be probed.
jnxOspfv3VirtIfTable
Information about this router's virtual interfaces. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3VirtIfEntry
Information about a single Virtual Interface.
jnxOspfv3VirtIfAreaId
The Transit Area that the Virtual Link traverses. By definition, this is not Area 0
jnxOspfv3VirtIfNeighbor
The Router ID of the Virtual Neighbor.
jnxOspfv3VirtIfIndex
The local interface index assigned to this OSPFv3 virtual interface. It is advertised in Hello's sent over the virtal link and in the router's router-LSAs.
jnxOspfv3VirtIfInstId
Specifies the interface instance ID to be used for the virtual interface. This ID has local link significance only.
jnxOspfv3VirtIfTransitDelay
The estimated number of seconds it takes to transmit a link state update packet over this interface.
jnxOspfv3VirtIfRetransInterval
The number of seconds between link state advertisement retransmissions, for adjacencies belonging to this interface. This value is also used when retransmitting database description and link state request packets. This value should be well over the expect ...
jnxOspfv3VirtIfHelloInterval
The length of time, in seconds, between the Hello packets that the router sends on the interface. This value must be the same for the virtual neighbor.
jnxOspfv3VirtIfRtrDeadInterval
The number of seconds that a router's Hello packets have not been seen before its neighbors declare the router down. This should be some multiple of the Hello interval. This value must be the same for the virtual neighbor.
jnxOspfv3VirtIfState
ospf virtual interface states. The same encoding as the ospfV3IfTable is used.
jnxOspfv3VirtIfEvents
The number of state changes or error events on this Virtual Link
jnxOspfv3VirtIfStatus
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
jnxOspfv3VirtIfLinkScopeLsaCount
The total number of Link-Scope link state advertisements in this virtual link's link state database.
jnxOspfv3VirtIfLinkLsaCksumSum
The 32-bit unsigned sum of the Link-Scope link-state advertisements' LS checksums contained in this virtual link's link-state database. The sum can be used to determine if there has been a change in a router's link state database, and to compare the link ...
jnxOspfv3NbrTable
A table of non-virtual neighbor information.
jnxOspfv3NbrEntry
The information regarding a single neighbor.
jnxOspfv3NbrIfIndex
The local link ID of the link over which the neighbor can be reached.
jnxOspfv3NbrIfInstId
Interface instance over which the neighbor can be reached. This ID has local link significance only.
jnxOspfv3NbrRtrId
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
jnxOspfv3NbrAddressType
The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.
jnxOspfv3NbrAddress
The IPv6 address of the neighbor associated with the local link.
jnxOspfv3NbrOptions
A Bit Mask corresponding to the neighbor's options field.
jnxOspfv3NbrPriority
The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
jnxOspfv3NbrState
The State of the relationship with this Neighbor.
jnxOspfv3NbrEvents
The number of times this neighbor relationship has changed state, or an error has occurred.
jnxOspfv3NbrLsRetransQLen
The current length of the retransmission queue.
jnxOspfv3NbrHelloSuppressed
Indicates whether Hellos are being suppressed to the neighbor
jnxOspfv3NbrIfId
The interface ID that the neighbor advertises in its Hello Packets on this link, that is, the neighbor's local interface index.
jnxOspfv3NbrRestartHelperStatus
Indicates whether the router is acting as a Graceful restart helper for the neighbor.
jnxOspfv3NbrRestartHelperAge
Remaining time in current OSPF Graceful restart interval, if the router is acting as a restart helper for the neighbor.
jnxOspfv3NbrRestartHelperExitRc
Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgress:......a restart attempt is currentlyly underway. completed:.......the last restart completed ...
jnxOspfv3CfgNbrTable
A table of configured, non-virtual neighbor information. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3CfgNbrEntry
The information regarding a single configured neighbor or neighbor discovered by lower-level protocols such as Inverse Neighbor Discovery.
jnxOspfv3CfgNbrIfIndex
The local link ID of the link over which the neighbor can be reached.
jnxOspfv3CfgNbrIfInstId
Interface instance over which the neighbor can be reached. This ID has local link significance only.
jnxOspfv3CfgNbrAddressType
The address type of ospfv3NbrAddress. Only IPv6 addresses without zone index are expected.
jnxOspfv3CfgNbrAddress
The IPv6 address of the neighbor associated with the local link.
jnxOspfv3CfgNbrPriority
The priority of this neighbor in the designated router election algorithm. The value 0 signifies that the neighbor is not eligible to become the designated router on this particular network.
jnxOspfv3CfgNbrStatus
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
jnxOspfv3VirtNbrTable
A table of virtual neighbor information. Marking this table and its objects deprecated as it is now implemented as a part of RFC 5643.
jnxOspfv3VirtNbrEntry
Virtual neighbor information.
jnxOspfv3VirtNbrArea
The Transit Area Identifier.
jnxOspfv3VirtNbrRtrId
A 32-bit integer uniquely identifying the neighboring router in the Autonomous System.
jnxOspfv3VirtNbrIfIndex
The local interface ID for the virtual link over which the neighbor can be reached.
jnxOspfv3VirtNbrIfInstId
The interface instance for the virtual link over which the neighbor can be reached.
jnxOspfv3VirtNbrAddressType
The address type of ospfv3VirtNbrAddress. Only IPv6 addresses without zone index are expected.
jnxOspfv3VirtNbrAddress
The IPv6 address advertised by this Virtual Neighbor. It must be a Global scope address.
jnxOspfv3VirtNbrOptions
A Bit Mask corresponding to the neighbor's options field.
jnxOspfv3VirtNbrState
The state of the Virtual Neighbor Relationship.
jnxOspfv3VirtNbrEvents
The number of times this virtual link has changed its state, or an error has occurred.
jnxOspfv3VirtNbrLsRetransQLen
The current length of the retransmission queue.
jnxOspfv3VirtNbrHelloSuppressed
Indicates whether Hellos are being suppressed to the neighbor
jnxOspfv3VirtNbrIfId
The interface ID that the neighbor advertises in its Hello Packets on this virtual link, that is, the neighbor's local interface ID.
jnxOspfv3VirtNbrRestartHelperStatus
Indicates whether the router is acting as a Graceful restart helper for the neighbor.
jnxOspfv3VirtNbrRestartHelperAge
Remaining time in current OSPF Graceful restart interval, if the router is acting as a restart helper for the neighbor.
jnxOspfv3VirtNbrRestartHelperExitRc
Describes the outcome of the last attempt at acting as a Graceful restart helper for the neighbor. none:............no restart has yet been attempted. inProgress:......a restart attempt is currently underway. completed:.......the last restart completed su ...
jnxOspfv3AreaAggregateTable
A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most specific match is the preferred one. Marking this table and its objects deprecated as it is now imple ...
jnxOspfv3AreaAggregateEntry
A range of IPv6 prefixes specified by a prefix/prefix length pair. Note that if ranges are configured such that one range subsumes another range the most specific match is the preferred one.
jnxOspfv3AreaAggregateAreaID
The Area the Address Aggregate is to be found within.
jnxOspfv3AreaAggregateAreaLsdbType
The type of the Address Aggregate. This field specifies the Area Lsdb type that this Address Aggregate applies to.
jnxOspfv3AreaAggregatePrefixType
The prefix type of ospfv3AreaAggregatePrefix. Only IPv6 addresses are expected.
jnxOspfv3AreaAggregatePrefix
The IPv6 Prefix.
jnxOspfv3AreaAggregatePrefixLength
The length of the prefix (in bits). A prefix can not be shorter than 3 bits.
jnxOspfv3AreaAggregateStatus
This object permits management of the table by facilitating actions such as row creation, construction and destruction. The value of this object has no effect on whether other objects in this conceptual row can be modified.
jnxOspfv3AreaAggregateEffect
Prefixes subsumed by ranges either trigger the advertisement of the indicated aggregate (advertiseMatching), or result in the prefix not being advertised at all outside the area.
jnxOspfv3AreaAggregateRouteTag
This tag is advertised only in the summarized As-External LSA when summarizing from NSSA-LSA's to AS-External-LSA's.
jnxOspfv3ConfigErrorType
Potential types of configuration conflicts. Used by the ospfv3ConfigError and ospfv3ConfigVirtError notifications. When the last value of a notification using this object is needed, but no notifications of that type have been sent, this value pertaining t ...
jnxOspfv3PacketType
OSPFv3 packet types. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining to this object should be returned as nullPacket
jnxOspfv3PacketSrc
The IPv6 address of an inbound packet that cannot be identified by a neighbor instance. When the last value of a notification using this object is needed, but no notifications of that type have been sent, the value pertaining to this object should be retu ...
jnxOspfv3BasicGroup
These objects are used for managing/monitoring OSPFv3 global parameters.
jnxOspfv3AreaGroup
These objects are used for ospfv3 systems supporting areas.
jnxOspfv3AsLsdbGroup
These objects are used for ospfv3 systems that display their AS-scope link state database.
jnxOspfv3AreaLsdbGroup
These objects are used for OSPFv3 systems that display their Area-scope link state database.
jnxOspfv3LinkLsdbGroup
These objects are used for OSPFv3 systems that display their Link-scope link state database.
jnxOspfv3HostGroup
These objects are used for OSPFv3 systems that support attached hosts.
jnxOspfv3IfGroup
These interface objects used for managing/monitoring OSPFv3 interfaces.
jnxOspfv3VirtIfGroup
These virtual interface objects are used for managing/monitoring OSPFv3 virtual interfaces.
jnxOspfv3NbrGroup
These neighbor objects are used for managing/monitoring OSPFv3 neighbors.
jnxOspfv3CfgNbrGroup
These configured neighbor objects are used for managing/monitoring ospfv3 configured neighbors.
jnxOspfv3VirtNbrGroup
These virtual neighbor objects are used for managing/monitoring OSPFv3 virtual neighbors.
jnxOspfv3AreaAggregateGroup
These area aggregate objects used required for aggregating OSPFv3 prefixes for summarization across areas.
jnxOspfv3NotificationObjectGroup
These objects are used to record notification parameters

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list