JUNIPER-MIMSTP-MIB

JUNIPER-MIMSTP-MIB Download

MIBs list

This mib module is for Juniper Networks Proprietory Multiple Instance MSTP mib

With the IPHost SNMP tool, you can monitor any SNMP objects of the JUNIPER-MIMSTP-MIB.

OID list for JUNIPER-MIMSTP-MIB

jnxMIMstGlobalTrace
This object is used to enable Global Trace Statements in the MSTP Module.
jnxMIMstGlobalDebug
This object is used to enable Global Debug Statements in the MSTP Module.
jnxMIDot1sJuniperMstTable
List of per Virtual Context Mst Module Parameters.
jnxMIDot1sJuniperMstEntry
Virtual Context Mst Module Parameters.
jnxMIDot1sJuniperMstContextId
Identifies the Virtual Context.
jnxMIMstSystemControl
The administrative shutdown status requested by management for the MST feature. The value start (1) indicates that MST should be active in the device on all ports. The value shutdown (2) indicates that MST should be shutdown in the device on all ports. Al ...
jnxMIMstModuleStatus
The administrative status requested by management for the MST feature. The value enabled(1) indicates that Mst should be enabled in the device on all ports. The value disabled(2) indicates that Mst should be disabled in the device on all ports. The object ...
jnxMIMstMaxMstInstanceNumber
The Maximun number of spanning trees to be allowed. A User may limit the Number of Spanning Tree instance to be allowed in the Bridge.
jnxMIMstNoOfMstiSupported
Indicates Maximum number of spanning tree Instances supported.
jnxMIMstMaxHopCount
Indicates the Maximum Hop Count value. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
jnxMIMstBrgAddress
The MAC address used by this bridge when it must be referred to in a unique fashion. It is recommended that this be the numerically smallest MAC address of all ports that belong to this bridge. However it is only required to be unique. When concatenate ...
jnxMIMstCistRoot
The bridge identifier of the Root of the common spanning tree as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Root Identifier parameter in all Configuration Bridge PDUs originated by this node.
jnxMIMstCistRegionalRoot
The bridge identifier of the Root of the Multiple spanning tree region as determined by the Spanning Tree Protocol as executed by this node. This value is used as the CIST Regional Root Identifier parameter in all Configuration Bridge PDUs originated by ...
jnxMIMstCistRootCost
The Cost of the path to the CIST Root as seen from this bridge.
jnxMIMstCistRegionalRootCost
The Cost of the path to the CIST Regional Root as seen from this bridge.
jnxMIMstCistRootPort
The Port Number of the Port which offers the lowest path cost from this bridge to the CIST Root Bridge.
jnxMIMstCistBridgePriority
The Value of the writable portion of the Bridge Identifier comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
jnxMIMstCistBridgeMaxAge
The value that all bridges use for MaxAge when this bridge is acting as the root. The granularity of this timer is specified to be 1 second. An agent may return a badValue error if a set is attempted to a value which is not a whole number of seconds.
jnxMIMstCistBridgeForwardDelay
The value that all bridges use for ForwardDelay when this bridge is acting as the root. Note that 802.1D specifies that the range for this parameter is related to the value of BridgeMaxAge. The granularity of this timer is specified to be 1 second. An a ...
jnxMIMstCistHoldTime
This time value determines the interval length during which no more than two Configuration bridge PDUs shall be transmitted by this node, in units of hundredths of a second.
jnxMIMstCistMaxAge
The maximum age of Spanning Tree Protocol information learned from the network on any port before it is discarded, in units of hundredths of a second. This is the actual value that this bridge is currently using.
jnxMIMstCistForwardDelay
This time value, measured in units of hundredths of a second, controls how fast a port changes its spanning state when moving towards the Forwarding state. The value determines how long the port stays in a particular state before moving to the next state ...
jnxMIMstMstpUpCount
The number of times MSTP Module has been enabled.
jnxMIMstMstpDownCount
The number of times MSTP Module has been disabled.
jnxMIMstPathCostDefaultType
The version of the Spanning Tree default Path Costs that are to be used by this Bridge. A value of 8021d1998(1) uses the 16-bit default Path Costs from IEEE Std. 802.1D-1998. A value of stp8021t2001(2) uses the 32-bit default Path Costs from IEEE Std. 80 ...
jnxMIMstTrace
This object is used to enable Trace Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of tracing. Each BIT in the four byte integer, represents a particular level of Trace. The mapping between the bit positions & the level ...
jnxMIMstDebug
This object is used to enable Debug Statements in the MSTP Module. A FOUR BYTE integer is used for enabling the level of debugging. Each BIT in the four byte integer, represents a particular level of Debug. The mapping between the bit positions & the leve ...
jnxMIMstForceProtocolVersion
The version of Spanning Tree Protocol the bridge is currently running. The value 'stpCompatible(0)' indicates the Spanning Tree Protocol specified in IEEE 802.1D and 'rstp(2)' indicates the Rapid Spanning Tree Protocol specified in IEEE 802.1w and 'mstp( ...
jnxMIMstTxHoldCount
The value used by the Port Transmit state machine to limit the maximum transmission rate.
jnxMIMstMstiConfigIdSel
The Configuration Identifier Format Selector used by the Bridge. This has a fixed value of 0 to indicate RegionName, RegionVersion are specified as in Standard.
jnxMIMstMstiRegionName
The Name for the Region's configuration. By Default Region Name will be equal to the Bridge Mac Address.
jnxMIMstMstiRegionVersion
Version of the MST Region.
jnxMIMstMstiConfigDigest
The Configuration Digest value for this Region.
jnxMIMstBufferOverFlowCount
The number of times Buffer overflows/failures have occured. A Trap is generated on the occurence of this event.
jnxMIMstMemAllocFailureCount
The number of times memory allocation failures have occured. A Trap is generated on the occurence of this event.
jnxMIMstRegionConfigChangeCount
The number of times a Region Configuration Identifier Change was detected. A Trap is generated on the occurence of this event.
jnxMIMstCistBridgeRoleSelectionSemState
Current state of the Port Role Selection State Machine of this bridge in Common Spanning Tree context
jnxMIMstCistTimeSinceTopologyChange
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for Common Spanning Tree context.
jnxMIMstCistTopChanges
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for Common Spanning Tree context.
jnxMIMstCistNewRootBridgeCount
The number of times this Bridge has detected a Root Bridge change for Common Spanning Tree context. A Trap is generated on the occurence of this event.
jnxMIMstCistHelloTime
This time value, measured in units of hundredths of a second, specifies the amount of time between the transmission of configuration BPDUs by this node on any port when it is the root of the spanning tree or trying to become so.
jnxMIMstCistBridgeHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node in units of hundredths of a second.
jnxMIMstCistDynamicPathcostCalculation
This object is used to determine whether dynamic pathcost calculation is allowed or not.The value is determined by management. If set to true, pathcost is calculated dynamically from port speed, otherwise the link speed at the time of port creation is use ...
jnxMIMstMstiBridgeTable
Table containing Bridge Information specific to Spanning Tree Instance. This table maintains context ID as one more index to support Multiple Instances.
jnxMIMstMstiBridgeEntry
Entry indicating the Bridge Information.
jnxMIMstMstiInstanceIndex
Spanning Tree Instance to which the information belongs.
jnxMIMstMstiBridgeRegionalRoot
MSTI Regional Root Identifier value for the Instance. This value is used as the MSTI Regional Root Identifier parameter in all Configuration Bridge PDUs originated by this node
jnxMIMstMstiBridgePriority
The writable portion of the MSTI Bridge Identifier. comprising of the first two octets. The values that are set for Bridge Priority must be in steps of 4096.
jnxMIMstMstiRootCost
The Cost of the path to the MSTI Regional Root as seen by this bridge.
jnxMIMstMstiRootPort
The Port Number of the Port which offers the lowest path cost from this bridge to the MSTI Region Root Bridge.
jnxMIMstMstiTimeSinceTopologyChange
The time (in hundredths of a second) since the TcWhile Timer for any port in this Bridge was non-zero for this spanning tree instance.
jnxMIMstMstiTopChanges
The number of times that there have been atleast one non-zero TcWhile Timer on this Bridge for this spanning tree instance.
jnxMIMstMstiNewRootBridgeCount
The number of times this Bridge has detected a Root Bridge change for this spanning tree instance. A Trap is generated on the occurence of this event.
jnxMIMstMstiBridgeRoleSelectionSemState
Current state of the Port Role Selection State Machine for this spanning tree instance for this bridge.
jnxMIMstInstanceUpCount
The number of times a new spanning tree instance has been created. This counter is incremented whenever a new spanning tree instance is created and also whenever a vlan is mapped to the instance. A Trap is generated on the occurence of this event.
jnxMIMstInstanceDownCount
The number of times a spanning tree instance has been deleted. This counter is incremented whenever a spanning tree instance is deleted and also whenever a vlan is unmapped from the instance. A Trap is generated on the occurence of this event.
jnxMIMstOldDesignatedRoot
The bridge identifier of the old root of the spanning tree instance as determined by the Spanning Tree Protocol as executed by this node.
jnxMIMstVlanInstanceMappingTable
This table contains one entry for each instance of MSTP. This table maintains context ID as one more index to support Multiple Instances.
jnxMIMstVlanInstanceMappingEntry
A conceptual row containing the status of the MSTP instance.
jnxMIMstInstanceIndex
An arbitrary integer within the range from 1 to the value of Max Instance Number that uniquely identifies an instance.
jnxMIMstMapVlanIndex
The VlanId will get mapped to the spanning tree instance specified. All the Instance Specific information for the Member ports of the Vlan will be created.This object is used only for SET operation.GET Operation returns null values. If the VlanId to Insta ...
jnxMIMstUnMapVlanIndex
The VlanId will get unmapped from spanning tree instance to which it it mapped. All the Instance Specific information for the Member ports of the Vlan will get released.This object is used only for SET operation.GET Operation returns null values.
jnxMIMstSetVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that o ...
jnxMIMstResetVlanList
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that o ...
jnxMIMstInstanceVlanMapped
A string of octets containing one bit per VLAN. The first octet corresponds to VLANs with VlanIndex values 1 through 8; the second octet to VLANs 9 through 16 etc. The most significant bit of each octet corresponds to the lowest VlanIndex value in that o ...
jnxMIMstInstanceVlanMapped2k
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 1024 through 2047. The first octet corresponds to VLANs with VlanIndex values 1024 through 1031; the second octet to VLANs 1032 through 1039 etc. The most significant bit of e ...
jnxMIMstInstanceVlanMapped3k
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 2048 through 3071. The first octet corresponds to VLANs with VlanIndex values of 2048 through 2055; the second octet to VLANs 2056 through 2063 etc. The most significant bit o ...
jnxMIMstInstanceVlanMapped4k
A string of octets containing one bit per VLAN for VLANS with VlanIndex values 3072 through 4095. The first octet corresponds to VLANs with VlanIndex values 3072 through 3079; the second octet to VLANs 3080 through 3087 etc. The most significant bit of e ...
jnxMIMstCistPortTable
This table contains Common Spanning Tree Port Information.
jnxMIMstCistPortEntry
A list of information maintained by every port for Common Spanning tree.
jnxMIMstCistPort
The Port number of the port for which this entry contains spanning tree information.
jnxMIMstCistPortPathCost
The contribution of this port to the path cost of paths towards the CIST Root which include this port.
jnxMIMstCistPortPriority
The four most significant bits of the Port Identifier of the Spanning Tree instance can be modified by setting the CistPortPriority value. The values that are set for Port Priority must be in steps of 16.
jnxMIMstCistPortDesignatedRoot
The unique Bridge Identifier of the bridge recorded as the CIST Root in the configuration BPDUs transmitted.
jnxMIMstCistPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
jnxMIMstCistPortDesignatedPort
The Port identifier of the port on the Designated Bridge for this port's segment.
jnxMIMstCistPortAdminP2P
The administrative point-to-point status of the LAN segment attached to this port. A value of forceTrue(0) indicates that this port should always be treated as if it is connected to a point-to-point link. A value of forceFalse(1) indicates that this por ...
jnxMIMstCistPortOperP2P
The operational point-to-point status of the LAN segment attached to this port. It indicates whether a port is considered to have a point-to-point connection or not. The value is determined by management or by auto-detection, as described in the jnxMIMst ...
jnxMIMstCistPortAdminEdgeStatus
The administrative value of the Edge Port parameter. A value of TRUE(1) indicates that this port should be assumed as an edge-port and a value of FALSE(2) indicates that this port should be assumed as a non-edge-port.
jnxMIMstCistPortOperEdgeStatus
The operational value of the Edge Port parameter. The object is initialized to the value of jnxMIMstCistPortAdminEdgeStatus and is set FALSE on reception of a BPDU.
jnxMIMstCistPortProtocolMigration
Indicates the Protocol migration state of this Port. When operating in RSTP/MSTP (version >= 2) mode, writing TRUE(1) to this object forces this port to transmit MSTP BPDUs without instance information. Any other operation on this object has no effect and ...
jnxMIMstCistPortState
Current state of the Port as defined by the Common spanning tree protocol.
jnxMIMstCistForcePortState
Current state of the Port which can be changed to either Disabled or Enabled for ALL spanning tree instances. Setting this object will override the port's status in any of the MSTI contexts
jnxMIMstCistPortForwardTransitions
Number of times this port has transitioned to the Forwarding State.
jnxMIMstCistPortRxMstBpduCount
Number of MST BPDUs received on this port.
jnxMIMstCistPortRxRstBpduCount
Number of RST BPDUs received on this port.
jnxMIMstCistPortRxConfigBpduCount
Number of Configuration BPDUs received on this port.
jnxMIMstCistPortRxTcnBpduCount
Number of TCN BPDUs received on this port.
jnxMIMstCistPortTxMstBpduCount
Number of MST BPDUs Transmitted from this port.
jnxMIMstCistPortTxRstBpduCount
Number of RST BPDUs Transmitted from this port.
jnxMIMstCistPortTxConfigBpduCount
Number of Configuration BPDUs Transmitted from this port.
jnxMIMstCistPortTxTcnBpduCount
Number of TCN BPDUs Transmitted from this port.
jnxMIMstCistPortInvalidMstBpduRxCount
Number of Invalid MST BPDUs Received on this port.
jnxMIMstCistPortInvalidRstBpduRxCount
Number of Invalid RST BPDUs Received on this port.
jnxMIMstCistPortInvalidConfigBpduRxCount
Number of Invalid Configuration BPDUs Received on this port.
jnxMIMstCistPortInvalidTcnBpduRxCount
Number of Invalid TCN BPDUs Received on this port.
jnxMIMstCistPortTransmitSemState
Indicates current State of the Port Transmit state machine.
jnxMIMstCistPortReceiveSemState
Indicates current State of the Port Receive state machine.
jnxMIMstCistPortProtMigrationSemState
Indicates current State of the Port Protocol Migration State machine.
jnxMIMstCistProtocolMigrationCount
The number of times this Port has migrated from one STP protocol version to another. The relevant protocols are STP-COMPATIBLE and RSTP/MSTP. A Trap is generated on the occurence of this event.
jnxMIMstCistPortDesignatedCost
The path cost of the Designated Port of the segment connected to this port.
jnxMIMstCistPortRegionalRoot
The unique Bridge Identifier of the bridge recorded as the CIST Regional Root Identifier in the configuration BPDUs transmitted.
jnxMIMstCistPortRegionalPathCost
The contribution of this port to the path cost of paths towards the CIST Regional Root which include this port.
jnxMIMstCistSelectedPortRole
Selected Port Role of the port for this spanning tree instance.
jnxMIMstCistCurrentPortRole
Current Port Role of the port for this spanning tree instance.
jnxMIMstCistPortInfoSemState
Current state of the Port Information State Machine for this port in this spanning tree context.
jnxMIMstCistPortRoleTransitionSemState
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
jnxMIMstCistPortStateTransitionSemState
Current state of the Port State Transition State Machine for this port in this spanning tree context.
jnxMIMstCistPortTopologyChangeSemState
Current state of the Topology Change State Machine for this port in this spanning tree context.
jnxMIMstCistPortHelloTime
The amount of time between the transmission of Configuration bridge PDUs by this node on this port in units of hundredths of a second.
jnxMIMstCistPortOperVersion
This indicates whether the Port is operationally in the Mstp mode, Rstp mode or the Stp-compatible mode i.e., whether the Port is transmitting MST BPDUs, RST BPDUs or Config/TCN BPDUs.
jnxMIMstCistPortEffectivePortState
The effective operational state of the port for CIST. This will TRUE only when the port is operationally up in the Interface level and Protocol level for CIST. This is will be set to False for all other times.
jnxMIMstCistPortAutoEdgeStatus
This parameter when TRUE(1) indicates that detection of a port as Edge Port happens automatically and FALSE(2) indicates that this feature is disabled.
jnxMIMstMstiPortTable
This table contains Spanning Tree Instance Specific Port Information.
jnxMIMstMstiPortEntry
A list of information maintained by every port for each and every spanning tree instance.
jnxMIMstMstiPort
The Port number of the port for which this entry contains spanning tree information.
jnxMIMstMstiPortPathCost
The contribution of this port to the path cost of paths towards the MSTI Root which include this port.
jnxMIMstMstiPortPriority
The four most significant bits of the Port Identifier for a given Spanning Tree instance can be modified independently for each Spanning Tree instance supported by the Bridge. The values that are set for Port Priority must be in steps of 16.
jnxMIMstMstiPortDesignatedRoot
The unique Bridge Identifier of the bridge recorded as the MSTI Regional Root in the configuration BPDUs transmitted.
jnxMIMstMstiPortDesignatedBridge
The unique Bridge Identifier of the bridge which this port considers to be the Designated Bridge for the port's segment.
jnxMIMstMstiPortDesignatedPort
The Port identifier of the port on the Designated Bridge for this port's segment.
jnxMIMstMstiPortState
Current state of the Port as defined by the Multiple spanning tree protocol. Port which is Forwarding state in one instance can be in Discarding (Blocking) state in another instance.
jnxMIMstMstiForcePortState
Current state of the Port which can be changed to either Disabled or Enabled for the specific spanning tree instance. This object can be set to enabled only if the 'jnxMIMstCistForcePortState' is set to 'enabled' for this port
jnxMIMstMstiPortForwardTransitions
Number of times this port has transitioned to the Forwarding State for specific instance.
jnxMIMstMstiPortReceivedBPDUs
Number of BPDUs received by this port for this spanning tree instance.
jnxMIMstMstiPortTransmittedBPDUs
Number of BPDUs transmitted on this port for this spanning tree instance.
jnxMIMstMstiPortInvalidBPDUsRcvd
Number of Invalid BPDUs received on this Port for this spanning tree instance.
jnxMIMstMstiPortDesignatedCost
The path cost of the Designated Port of the segment connected to this port.
jnxMIMstMstiSelectedPortRole
Selected Port Role of the port for this spanning tree instance.
jnxMIMstMstiCurrentPortRole
Current Port Role of the port for this spanning tree instance.
jnxMIMstMstiPortInfoSemState
Current state of the Port Information State Machine for this port in this spanning tree context.
jnxMIMstMstiPortRoleTransitionSemState
Current state of the Port Role Transition State Machine for this port in this spanning tree context.
jnxMIMstMstiPortStateTransitionSemState
Current state of the Port State Transition State Machine for this port in this spanning tree context.
jnxMIMstMstiPortTopologyChangeSemState
Current state of the Topology Change State Machine for this port in this spanning tree context.
jnxMIMstMstiPortEffectivePortState
The effective operational stae of the port for specific instance. This is will be TRUE only when the port is operationally up in the interface level and Protocol level for the specific instance. This is will be set to false at all other times.
jnxMIMstCistPortProtectTable
Defines the jnxMIMstCist Port Table for providing extensions for Root Protect and Loop Protect to the corresponding jnxMIMstCistPortTable entry.
jnxMIMstCistPortProtectEntry
Defines an entry in the jnxMIMstCistPortProtectTable. This essentially augments the jnxMIMstCistPortEntry with additional objects.
jnxMIMstCistPortRootProtectEnabled
A Boolean value set by management indicating whether Root protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Root Port for the CIST or any MSTI, even it has the best spanning tree priority vector. This parameter sh ...
jnxMIMstCistPortRootProtectState
Indicates whether the port was prevented from being a root port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortRootProtectEnabled is FALSE.
jnxMIMstCistPortLoopProtectEnabled
A Boolean value set by management indicating whether Loop protect functionality is enabled on the port. If TRUE causes the Port not to be selected as Designated Port for the CIST or any MSTI, when the received superior BPDU is aged out. This parameter sho ...
jnxMIMstCistPortLoopProtectState
Indicates whether a potential Loop was prevented on the port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortLoopProtectEnabled is FALSE.
jnxMIMstMstiPortProtectTable
Defines the jnxMIMstMsti Port Table for providing extensions for Root Protect and Loop Protect to the corresponding jnxMIMstMstiPortTable entry.
jnxMIMstMstiPortProtectEntry
Defines an entry in the jnxMIMstMstiPortProtectTable. This essentially augments the jnxMIMstMstiPortEntry with additional objects.
jnxMIMstMstiPortRootProtectState
Indicates whether the port was prevented from being a root port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortRootProtectEnabled is FALSE.
jnxMIMstMstiPortLoopProtectState
Indicates whether a potential Loop was prevented on the port for CIST. This parameter will always return 'no-error (0)' if jnxMIMstCistPortLoopProtectEnabled is FALSE.
jnxMIDot1sJnxMstSetGlobalTrapOption
This object is used to enable and disable MSTP traps for memory failure or buffer failure irrespective of the context in which the failure occurs. 0 - Traps are not enabled. 1 - Memory and buffer failure traps enabled
jnxMIMstGlobalErrTrapType
Used within the Trap Notification PDU. It denotes general events like none - none of the below values memfail - memory allocation failure bufffail - buffer allocation failure
jnxMIDot1sJnxMstTrapsControlTable
List of per virtual bridge Trap Control Info.
jnxMIDot1sJnxMstTrapsControlEntry
Virtual bridge TrapsControl information.
jnxMIMstSetTraps
This object is used to enable and disable context-specific MSTP traps. Currently the following are defined 0 - Traps are not enabled. 1 - General Traps like protocol up or down 2 - Exception Traps like port protocol migration or invalid packet rcvd in po ...
jnxMIMstGenTrapType
Used within the Trap Notification PDU. It denotes general events like none - none of the below values up - protocol UP, down - protocol DOWN
jnxMIMstPortTrapNotificationTable
This table is used to store the notification information occured in each of the port for protocol migration and invalid packet received. This table is maintained per virtual context in the system.
jnxMIMstPortTrapNotificationEntry
This entry is used to store the notification information
jnxMIMstPortTrapIndex
A unique value, greater than zero, indicating the Port number.
jnxMIMstPortMigrationType
Port Protocol migration type occured in the port
jnxMIMstPktErrType
Type of invalid packet received in each of the port
jnxMIMstPktErrVal
Packet error value corresponding to the above type

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list