JUNIPER-DFC-MIB Download
This is Juniper Networks' implementation of enterprise
specific MIB for Dynamic Flow Capture (DFC)
With the IPHost SNMP tool, you can monitor any SNMP objects of the
JUNIPER-DFC-MIB.
OID list for JUNIPER-DFC-MIB
- jnxDfcCSTable
- Statistics information for Control Source.
- jnxDfcCSEntry
- An entry of DFC Control Source table.
- jnxDfcGrpName
- The name assigned to a DFC group. A DFC group defines a set of DFC PICs that share same static/dynamic configuration.
- jnxDfcCSId
- Control Source identifier. Control Source identifies Juniper router with one unique Control IP address. There can be multiple IP addresses from which a Control Source can send Control protocol request to Juniper router.
- jnxDfcCSControlProtocolAddRequests
- Total number of Control protocol Add requests received. The add request specifies a new filter criteria to be merged with the existing tasking list for a given Control Source and Content Destination.
- jnxDfcCSCriteriaAdded
- Total number of filter criteria added successfully by the Control Source.
- jnxDfcCSCriteriaAdditionFailed
- Total number of filter criteria addition failed.
- jnxDfcCSControlProtocolDeleteRequests
- Total number of Control protocol delete requests received. The delete request removes a particular filter criterion.
- jnxDfcCSCriteriaDeleted
- Total number of filter criteria deleted successfully as requested by Control Source.
- jnxDfcCSCriteriaDeletionFailed
- Total number of filter criteria deletion failed.
- jnxDfcCSCriteriaDeletedTimeoutIdle
- Total number of criteria deleted by timeout idle.
- jnxDfcCSCriteriaDeletedTimeoutTotal
- Total number of criteria deleted by timeout total.
- jnxDfcCSCriteriaDeletedPackets
- Total number of criteria deleted by packets.
- jnxDfcCSCriteriaDeletedBytes
- Total number of criteria deleted by bytes.
- jnxDfcCSControlProtocolRefreshRequests
- Total number of Control protocol Refresh requests received. The refresh request updates the timeout for a particular filter criterion or set of filter criteria for the particular Control Source to a particular Content Destination.
- jnxDfcCSCriteriaRefreshed
- Total number of filter criteria refreshed successfully as requested by Control Source.
- jnxDfcCSCriteriaRefreshFailed
- Total number of filter criteria refresh request failed.
- jnxDfcCSControlProtocolListRequests
- Total number of Control protocol List requests received. The List request returns a list of all criteria that a particular Control Source has added and are currently active.
- jnxDfcCSListSuccess
- Total number of list commands processed successfully as requested by Control Source.
- jnxDfcCSListFailed
- Total number of list commands that could not be processed successfully.
- jnxDfcCSControlProtocolNoopRequests
- Total number of Control protocol Noop requests received. The purpose of this request is to verify the end-to-end connectivity between Control Source and DFC PIC.
- jnxDfcCSNoopSuccess
- Total number of Noop requests processed successfully as requested by Control Source.
- jnxDfcCSNoopFailed
- Total number of Noop requests that could not be processed successfully.
- jnxDfcCSDynamicCriteriaActive
- Total number of active dynamic filter criteria.
- jnxDfcCSStaticCriteriaActive
- Total number of active static filter criteria.
- jnxDfcCSBadRequest
- Total number of Bad requests received.
- jnxDfcCSResponseSuccessful
- Total number of successful response(s) corresponding to the requests (add, delete, refresh, list and noop) sent out to the Control Source.
- jnxDfcCSResponseImproperCriteria
- Total number of response(s) generated because of improper filter criterion specification in the add request.
- jnxDfcCSResponseUnknownContentDest
- Total number of response(s) generated because of unknown Content Destination specified in the add, delete, refresh and list request.
- jnxDfcCSResponseUnknownCriteriaId
- Total number of response(s) generated because of unknown Criteria Identifier specified in the delete, refresh and list request.
- jnxDfcCSResponseImproperTimeout
- Total number of response(s) generated because of improper timeout specified in the add and refresh request.
- jnxDfcCSResponseInvalidAuthentication
- Total number of response(s) generated because of invalid authentication specified in the add, delete, refresh, list and noop request.
- jnxDfcCSResponseInvalidSequenceNumber
- Total number of response(s) generated because of invalid Sequence Number specified in the add, delete, refresh, list and noop request.
- jnxDfcCSResponseInternalError
- Total number of response(s) generated because of internal error at the DFC PIC in processing a request.
- jnxDfcCSNotificationRestart
- Total number of Restart notifications sent to configured notification-recipients. This notification will be generated when the system experiences a failure such that all the DFC filter criteria are lost.
- jnxDfcCSNotificationRollover
- Total number of Rollover notifications sent to configured notification-recipients. This notification will be generated when the DFC PIC experiences a sequence number rollover.
- jnxDfcCSNotificationNoop
- Total number of Noop notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC receives a Noop message with the SendAsync parameter present.
- jnxDfcCSNotificationTimeout
- Total number of Timeout notifications sent to configured notification-recipents. This notification will be generated when the DFC PIC times out a filter criterion on any one of its configured timeout parameters and the criterion contains a SendTimeoutAsyn ...
- jnxDfcCSNotificationCongestion
- Total number of Congestion notifications sent to configured notification-recipents. This notification will be generated when the 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured Content Desti ...
- jnxDfcCSNotificationCongestionDelete
- Total number of Congestion Delete notifications sent to configured notification-recipents. This notification will be generated when the total 10-second average packet forwarding rate (in bits/second) summed over all active filter criteria to a configured ...
- jnxDfcCSNotificationDuplicatesDropped
- Total number of Duplicates Dropped notifications sent to configured notification-recipents. This notification will be generated when the configurable Maximum Duplicates parameter has been exceeded in such a way as to cause packets matching criteria added ...
- jnxDfcCSAddRequestRate
- The request processing rate (requests processed/second).
- jnxDfcCSAddRequestPeakRate
- The peak request processing rate (requests processed/second).
- jnxDfcCSAggrCriteriaBandwidth
- Bandwidth in bits/second.
- jnxDfcCSSequenceNumber
- Protocol sequence number.
- jnxDfcCDTable
- Statistics information for content destination.
- jnxDfcCDEntry
- An entry of DFC Content-Destination table.
- jnxDfcCDId
- Content Destination identifier. A Content Destination is the recipient of the extracted data, once it is forwarded by the Server.
- jnxDfcCDCriteria
- Total number of filter criteria configured for the Content Destination.
- jnxDfcCDByteRate
- Average data rate (in bytes/second) summed over all active filter criteria to a configured Content Destination.
- jnxDfcCDMatchedPackets
- Total number of packets matching the filter criteria configured for the Content Destination.
- jnxDfcCDMatchedBytes
- Total number of bytes matching the filter criteria configured for the Content Destination.
- jnxDfcCDCongestionNotification
- Total number of Congestion Notifications sent to a configured notification-recipient.
- jnxDfcNotifyVars
- Notification object definitions.
- jnxDfcInterfaceName
- The textual name of the DFC interface.
- jnxDfcInputPktRate
- data packet rate (in packets per second).
- jnxDfcPpsSoftOverloadLowWatermark
- Configured lowest value for data packet rate (in packets per second).
- jnxDfcPpsSoftOverloadHighWatermark
- Configured highest value for data packet rate (in packets per second).
- jnxDfcPpsHardOverloadLowWatermark
- Recommended lowest value for data packet rate (in packets per second).
- jnxDfcPpsHardOverloadHighWatermark
- Recommended highest value for data packet rate (in packets per second).
- jnxDfcFlowsUsage
- % usage of total number of flows in system.
- jnxDfcCriteriaUsage
- % usage of matching criteria for all filters.
- jnxDfcMemSoftOverloadLowWatermark
- Configured lowest watermark percent for memory load.
- jnxDfcMemSoftOverloadHighWatermark
- Configured highest watermark percent for memory load.
- jnxDfcFlowLowWatermark
- Recommended lowest value for number of flows allowed in the system.
- jnxDfcFlowHighWatermark
- Recommended highest value for number of flows allowed in the system.
- jnxDfcCriteriaLowWatermark
- Recommended lowest value for number of criterias allowed in the system.
- jnxDfcCriteriaHighWatermark
- Recommended highest value for number of criterias allowed in the system.
- jnxDfcNotificationPrefix
- All DFC notifications are registered under this branch.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
