Hub-rptr-prvt-sec

Hub-rptr-prvt-sec Download

MIBs list

IPHost Network Monitor offer an easy way of SNMP monitoring your Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for Hub-rptr-prvt-sec

prptrSecurityGroupTable
Table of descriptive and status information about the global security as represented in the non-volatile memory.
prptrSecurityGroupEntry
An entry in the table, containing information about the security of a single group.
prptrSecurityGroupIndex
This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said system.
prptrSecurityGroupAdminState
the repeater will allow the implementation of the security features according to port specific objects. When this object is set to disable(3) the repeater will disable the implementation of the security feature. The value other(1) is returned whenever the ...
prptrSecurityGroupAutoLearnMode
the repeater will enable auto learn mode for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. When this variable is set to disable(3) the repeater will disable auto learn mode for all 10BASET ports in LC342S card, and for ports 1-8 in L ...
prptrSecurityGroupBroadcastMode
change the value of the object prptrSecurityPortBroadcastMode to accept(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to reject(3) will change the value of the object prptrSecurityPortBroadcastMode to rej ...
prptrSecurityGroupMulticastMode
change the value of the object prptrSecurityPortMulticastMode to accept(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to reject(3) will change the value of the object prptrSecurityPortMulticastMode to rej ...
prptrSecurityGroupDisPortMode
the repeater will NOT disable the port on a source address mismatch. When this variable is set to enable(2) the repeater will disable the port on which a source address mismatch is detected. The value other(1) is returned whenever the rptrSecurityDisPortM ...
prptrSecurityGroupRandomMode
the repeater will generate the random pattern on a source address mismatch. When this variable is set to disable(3) The repeater will NOT generate the random pattern on a source address mismatch. The value other(1) is returned whenever the rptrSecurityRan ...
prptrSecurityGroupDAMismatch
change the value of the object prptrSecurityPortDAMismatch to enable(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to disable(3) will change the value of the object prptrSecurityPortDAMismatch to disable( ...
prptrSecurityGroupSAMismatch
change the value of the object prptrSecurityPortSAMismatch to enable(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to disable(3) will change the value of the object prptrSecurityPortSAMismatch to disable( ...
prptrSecurityAutoRplaceMode
change the value of the object prptrSecurityPortAutoRplceMode to enable(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to disable(3) will change the value of the object prptrSecurityPortAutoRplceMode to di ...
prptrSecurityAllPortsAdmin
change the value of the object prptrSecurityPortAdminState to enable(2) for all 10BASET ports in LC342S card, and for ports 1-8 in LC348S card. Setting this variable to disable(3) will change the value of the object prptrSecurityPortAdminState to disable( ...
rptrSecurityGroupTable
Table of the operational status information of the global security as represented in the security hardware.
rptrSecurityGroupEntry
An entry in the table, containing information about the global security status of a single group.
rptrSecurityGroupIndex
This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said system.
rptrSecurityGroupOperState
state of the security feature within the repeater. the operational state is set by specifying a value for prptrSecurityGroupAdminState. The value other(1) is returned whenever the operational state is unknown.
rptrSecurityGroupAutoLearnMode
the repeater enables auto learn mode for all 10BASET ports on LC342 cards, and for ports 1-8 in LC348S card. When value is disable(3) the repeater will disable auto learn mode for all 10BASET ports in LC342S cards, and for ports 1-8 in LC348S card. The va ...
rptrSecurityGroupDisPortMode
the repeater does NOT disable the port on a source address mismatch. When variable value is enable(3) the repeater will disable the port on which a source address mismatch is detected. The value other(1) is returned whenever the rptrSecurityDisPortMode is ...
rptrSecurityGroupRandomMode
the repeater generates the random pattern on a source address mismatch. When value is disable(3) the repeater does NOT generate the random pattern on a source address mismatch. The value other(1) is returned whenever the rptrSecurityRandomMode is unknown.
prptrSecurityPortTable
Table of descriptive and status information about the security of ports as represented in the non-volatile memory.
prptrSecurityPortEntry
An entry in the table, containing information about the security of a single port.
prptrSecurityPortGroupIndex
This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said system.
prptrSecurityPortIndex
This object identifies the port within the repeater for which this entry contains information.
prptrSecurityPortAdminState
the port allows the employment of security according to the specific objects. When this object is set to disable(3) the port stops employing security. The value other(1) is returned whenever the admin state is unknown. This value may not be written into t ...
prptrSecurityPortAutoLearnMode
the port functions in auto learn mode. When this variable is set to disable(3) the port does NOT function in auto learn mode. The value other(1) is returned whenever the learn mode is unknown. This value may not be written into the agent.
prptrSecurityPortBroadcastMode
the port accepts broadcast frames and repeats them to all ports. When the following objects have the values: prptrSecurityPortBroadcastMode = reject(3) prptrSecurityPortMulticastMode = reject(3) prptrSecurityPortDAMismatch = enable(2) the destination port ...
prptrSecurityPortMulticastMode
the port accepts multicast frames and repeats them to all ports. When the following objects have the values: prptrSecurityPortMulticastMode = reject(3) prptrSecurityPortDAMismatch = enable(2) the destination port will replace broadcast frames with random ...
prptrSecurityPortSAMismatch
the port employs source address comparison to implement security, meaning that whenever a packet is received on the port, the source address is compared to the security addresses, and if it does not match one of the MAC entries then SA mismatch will be re ...
prptrSecurityPortDAMismatch
the port employs destination address comparison to implement security, meaning that whenever a packet needs to be send to the port, the destination address of the packet is compared and if it does not match one of the MAC entries then DA mismatch is detec ...
prptrSecurityPortMAC1state
This object defines whether the first MAC entry for this port is valid or not. whenever this entry is set to valid(2) the prptrSecurityPortMAC1address cannot be changed. The value other(1) should be returned whenever the value of this object is unknown. T ...
prptrSecurityPortMAC1Address
This object holds the Ethernet physical address associated with MAC1 of this port.
prptrSecurityPortMAC2state
This object defines whether the second MAC entry for this port is valid or not. whenever this entry is set to valid(2) the prptrSecurityPortMAC2address cannot be changed. The value other(1) should be returned whenever the value of this object is unknown. ...
prptrSecurityPortMAC2Address
This object holds the Ethernet physical address associated with MAC2 of this port.
prptrSecurityPortAutoRplaceMode
address entry for the port is automatically replaced by addresses received at that port which cause address mismatch. The replacement is effective only when both cam entries are valid. Whenever this object is set to disable(3), once the cam entries become ...
rptrSecurityPortTable
Table of the operational information of the ports' security status as represented in the security hardware.
rptrSecurityPortEntry
An entry in the table, containing information about the security of a single port.
rptrSecurityPortGroupIndex
This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said system.
rptrSecurityPortIndex
This object identifies the port within the repeater for which this entry contains information.
rptrSecurityPortOperState
state of the security feature of the port. The value other(1) is returned whenever the operational state is unknown.
rptrSecurityPortAutoLearnMode
the port functions in auto learn mode. When disable(3) the port does not function in auto learn mode. The value other(1) will be returned whenever the learn mode is unknown.
rptrSecurityPortBroadcastMode
the port accepts broadcast frames and repeats them to all ports. When value is reject(3), and the following objects have the values: prptrSecurityPortMulticastMode = reject(3) prptrSecurityPortDAMismatch = enable(2) the port replaces broadcast frames wit ...
rptrSecurityPortMulticastMode
the port accepts multicast frames and repeats them to all ports. When value is reject(3) and the value of the object prptrSecurityPortDAMismatch is enabled(2), the port replaces multicast frames with random packets. The value other(1) is returned wheneve ...
rptrSecurityPortSAMismatch
the port employs source address comparison to implement security, meaning that whenever a packet is received on the port, the source address is compared and if it does not match one of the MAC entries then SA mismatch is reported. When value is disable(3 ...
rptrSecurityPortDAMismatch
the port employs destination address comparison to implement security, meaning that whenever a packet needs to be send to the port, the destination address of the packet is compared to the security addresses, and if it does not match one of the security M ...
rptrSecurityPortSAMismatches
the source address mismatch event occurred for that port.
rptrSecurityPortLastSAMismatch
on the port which caused a source address mismatch.
rptrSecurityPortMAC1state
This object defines whether the first MAC entry for this port is valid or not. The value other(1) should be returned whenever the value of this object is unknown.
rptrSecurityPortMAC1Address
This object holds the Ethernet physical address associated with MAC1 of this port.
rptrSecurityPortMAC2state
This object defines whether the second MAC entry for this port is valid or not. The value other(1) should be returned whenever the value of this object is unknown.
rptrSecurityPortMAC2Address
This object holds the Ethernet physical address associated with MAC2 of this port.
prptrSecurityMACTable
Table of descriptive and status information about the security shared MAC table as stored in the non-volatile memory. Maximum number of entries in this table is 32. This table represents the values in the non-volatile memory
prptrSecurityMACEntry
An entry in the table, containing information about a single MAC entry.
prptrSecurityMACGroupIndex
This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said system.
prptrSecurityMACEntryIndex
This object identifies the entry containing the information.
prptrSecurityMACPhysicalAddress
This object holds the Ethernet physical address associated with this MAC entry.
prptrSecurityMACState
This object defines whether this MAC entry is valid or not. whenever this entry is set to valid(2) other objects for this entry cannot be changed. The value other(1) should be returned whenever the value of this object is unknown. This value should not be ...
prptrSecurityMACPortMap
This object identifies the ports with which this MAC entry is associated. This object is a bit map where setting a given bit indicates that this MAC entry is associated with the port corresponding to that bit. The LSB of the bitmap corresponds to port 1. ...
rptrSecurityMACEntry
An entry in the table, containing information about a single MAC entry.
rptrSecurityMACGroupIndex
This object uniquely identifies the group for which this entry contains information. The group index is directly related to the repeater ID within the said system.
rptrSecurityMACEntryIndex
This object identifies the entry containing the information.
rptrSecurityMACPhysicalAddress
This object holds the Ethernet physical address associated with this MAC entry.
rptrSecurityMACState
This object defines whether this MAC entry is valid or not. The value other(1) should be returned whenever the value of this object is unknown.
rptrSecurityMACPortMap
This object identifies the ports with which this MAC entry is associated. This object is a bit map where setting a given bit indicates that this MAC entry is associated with the port corresponding to that bit. The LSB of the bitmap corresponds to port 1. ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list