HPNR Download

adapterTable

A List of Adapter Entries containing Information/Properties about the Adapters in the System.

adapterEntry

An entry in the Adapter Table. Each Entry corresponds to one Adapter in the System.

adpAdapterNumber

The Adapter Number for this Instance of Adapter Object. This Entry in the Table, contains Information about the Adapter Number specified by this variable.

numLogicalDrives

Number of Logical Drives Configured on this Adapter.

firmwareVersion

The Firmware Version of the Firmware running on this Adapter.

biosVersion

The Bios Version of the BIOS Present in the Flash ROM on this Adapter.

dramSizeInMB

Amount of DRAM in Mega Bytes present on this Adapter.

chipSetType

Motherboard Chipset Type for which the Adapter ASIC is Configured.

rebuildRateInPercent

Rebuild Rate for this Adapter. This determines the Priority of Rebuild/Check-Consistency/Reconstruct Operations versus the Read-Write Operations.

flushInterval

Internal Cache Flush Interval for Logical Drives in WriteBack Mode.

maxConcurrentCmds

Maximum Concurrent Commands Supported by the Adapter.

spinupDelay

This is the Spinup Delay for Spinning Up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the number of drives indicated by the spinupCount variable. spinupDelay variable is the amount of delay ...

spinupCount

This is the Spinup Count for Spinning up Physical Drives at Firmware Initialization Time. The Physical Drives are divided into Groups, each containing the number of drives indicated by this variable. All the drives in a group are issued SPINUP Command wit ...

adpIOReadsPerSec

Number of IO Reads/sec statistics for this adapter.

adpIOWritesPerSec

Number of IO Writes/sec statistics for this adapter.

adpReadKBsPerSec

Amount of Data Transferred in KBs/sec due to READ Transfers.

adpWriteKBsPerSec

Amount of Data Transferred in KBs/sec due to WRITE Transfers.

adpReadFailuresPerSec

Number of Read-Failures/sec statistics for this adapter.

adpWriteFailuresPerSec

Number of Write-Failures/sec statistics for this adapter.

scanChannels

Use this Variable to Discover the Non-Disk Devices attached to the Adapter. Set this Variable to startscan (an integer value of 2) to start the Channel Scanning.

logicaldriveTable

A List of Logical Drive Entries containing Information/Properties about the Logical Drives Configured in the System.

logicaldriveEntry

An Entry in the Logical Drive Table.

ldAdapterNumber

The Adapter Number for this Instance of Adapter/LogicalDrive object.

logicalDriveNumber

Logical Drive Number for this Logical Drive Entry.

status

The Status of this Logical Drive.

sizeInMB

The Configured Size of this Logical Drive.

raidLevel

Configured Raid Level for this Logical Drive.

stripeSize

Configured Stripe Size for this Logical Drive.

readPolicy

Configured Read Policy for this Logical Drive.

writePolicy

Configured Write Policy for this Logical Drive.

cachePolicy

Configured Cache Policy for this Logical Drive.

enquiryString

SCSI Inquiry String for this Logical Drive.

numberOfSpans

Number of Arrays across which this Logical Drive is Spanning.

numberOfStripes

Configured Number of Stripes for this Logical Drive.

checkConsistencyOrInitializeProgress

Check Consistency or Initialize Progress for this Logical Drive if the Logical Drive Status is checkconsistencyinprogress or initializeinprogress.

ldIOReadsPerSec

Number of IO Reads/sec Statistics for this Logical Drive.

ldIOWritesPerSec

Number of IO Writes/sec Statistics for this Logical Drive.

ldReadKBsPerSec

Amount of Data Transferred in KBs/sec due to READ Transfers.

ldWriteKBsPerSec

Amount of Data Transferred in KBs/sec due to WRITE Transfers.

ldReadFailuresPerSec

Number of Read-Failures/sec Statistics for this Logical Drive.

ldWriteFailuresPerSec

Number of Write-Failures/sec Statistics for this Logical Drive.

physicaldriveTable

A List of Physical Device Entries containing Information about the Physical Devices in the System.

physicaldriveEntry

An Entry in the Physical Drive Table.

physAdapterNumber

The Adapter Number for this Instance of Adapter/Physical-Drive Instance.

physChannel

Channel Number at Which this Physical Drive is Present.

targetID

SCSI Target ID at Which This Physical Drive is Present.

state

Current State of this Physical Drive.

arrayPosition

Array is a group of Physical Drives used to Configure Logical Drives. This String Variable has values of the type Ai-j. Example: A1-2 implies that this drive is 2nd member of Array-1.

sizeMB

Actual Size of this Physical Drive.

deviceType

Device Type of this Physical Drive.

inquiryString

SCSI Inquiry String for this Device.

scsiLevel

ANSI SCSI Level Conformance of this Device.

syncNegotiation

This indicates whether Firmware is Enabled or Disabled to perform the Synchronous Negotiation for this Device.

qtags

This indicates the Maximum Number of Concurrent Commands Firmware Issues to this Drive.

rebuildProgress

Rebuild Progress for this Physical Drive if the Physical Drive State is Rebuild.

mediumErrors

Medium Errors Occurred on this Drive Since it was Configured.

otherErrors

Other Errors Occurred on this Drive Since it was Configured.

channelTable

A List of Channel Entries containing Information/Properties about the Channels on the Adapter.

channelEntry

An Entry in the channel table.

chanAdapterNumber

The Adapter Number for this Instance of Adapter/Channel Instance.

channel

Channel Number for this Channel.

terminations

Current Terminations Effective on this Channel

channelStatus

Current Activity Status (QUIET/ACTIVE) for this Channel.

ioReadsPerSec

The Total IO-Reads/Sec Statistics on all Adapters.

ioWritesPerSec

The Total IO-Writes/Sec Statistics on all Adapters.

readKBsPerSec

The Total Read KBs Per Second Statistics on all Adapters.

writeKBsPerSec

The Total Write KBs Per Second Statistics on all Adapters.

readFailuresPerSec

The Total Read Failures Per Second Statistics on all Adapters.

writeFailuresPerSec

The Total Write Failures Per Second Statistics on all Adapters.