ECLAPBEXT-MIB

ECLAPBEXT-MIB Download

MIBs list

IPHost Network Monitor offer an easy way of SNMP monitoring your Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for ECLAPBEXT-MIB

lapbCountersTable
Runtime counters table, one row per port
lapbCountEntry
The set of counters for one port. Can be reset to 0.
lapbCountPortRef
The port number, the same as lapbParmPortRef from the lapbParmTable.
lapbCountRetransmis
The number of times a frame has been retransmitted
lapbCountSABMTxs
The number of Set Asynchronous Balanced Mode frames sent
lapbCountSABMRxs
The number of Set Asynchronous Balanced Mode frames received
lapbCountDISCTxs
The number of Disconnect frames sent
lapbCountDISCRxs
The number of Disconnect frames received
lapbCountDMsTxs
The number of Disconnected Mode frames sent
lapbCountDMsRxs
The number of Disconnected Mode frames received
lapbCountRNRsTxs
The number of Receiver Not Ready frames sent
lapbCountRNRsRxs
The number of Receiver Not Ready frames received
lapbCountUATxs
The number of Unnumbered Acknowledgement frames transmitted.
lapbCountUARxs
The number of Unnumbered Acknowledgement frames received.
lapbCountRRTxs
The number of Receiver Ready frames transmitted.
lapbCountRRRxs
The number of Receiver Ready frames received.
lapbCountFRMRTxs
The number of Frame Reject frames sent.
lapbCountFRMRRxs
The number of Frame Reject frames received.
lapbCountBadCRCTxs
The number of frames sent with bad CRC.
lapbCountBadCRCRxs
The number of frames received with bad CRC.
lapbCountAbortTxs
The number of frames sent with Abort indication.
lapbCountAbortRxs
The number of frames received with Abort indication.
lapbCountBadTypeTxs
The number of Unknown frames sent.
lapbCountBadTypeRxs
The number of Unknown frames received.
lapbCountInfoFrameTxs
The number of Information frames sent.
lapbCountInfoFrameRxs
The number of Information frames received.
lapbCountUnderrun
The number of times that more frames have been transmitted than the receiver can handle.
lapbCountOverrun
The number of times that the EiconCard could not handle incoming frames.
lapbCountXIDTxs
The number of Exchange Station Identification frames sent.
lapbCountXIDRxs
The number of Exchange Station Identification frames received.
lapbBandwidthTable
The table of configurable and informational parameters with respect to the bandwidth traps for lapb interfaces
lapbBandwidthEntry
the bandwidth traps for each lapb interface
lapbBandwidthIndex
The identifier of the EiconPort assigned by the agent.
lapbBandwidthHigh
The higher configurable threshold for the lapbTrapBandwidthShortage. If the percentage of bandwidth being used exceeds this amount over a configurable number of seconds (lapbBandwidthSecs) for a configurable number of consecutive periods, (lapbBandwidthNu ...
lapbBandwidthLow
The lower configurable threshold for the lapbTrapBandwidthClear. If the percentage of bandwidth being used drops below this amount, subsequent to a lapbTrapBandwidthShortage, then the trap is sent and the lapbBadwidthTrapsStatus is changed accordingly. No ...
lapbBandwidthSecs
The number of seconds over which the bandwidth is calculated.
lapbBandwidthNumPeriods
The number of consecutive periods, each of length lapbBandwidthSecs seconds, that the condition must be present for before the lapbBandwidthShortage trap is sent.
lapbBandwidthTrapState
This variable indicates whether the agent should generate the lapbTrapBandwidthShortage and lapbTrapBandwidthClear traps if the relevant conditions arise. Set this value to disabled to stop these traps being generated
lapbBandwidthTrapStatus
The status of the bandwidth traps. This value should be polled to determine whether or not the bandwidth shortage condition is present and a trap has been sent.
lapbBandwidthRxInUse
The percentage of bandwidth that is currently in use receiving incoming traffic.
lapbBandwidthTxInUse
The percentage of bandwidth that is currently in use transmitting outgoing traffic.
lapbOperTable
This table contains configuration information about interface parameters currently set in the interface. Many of these objects have corresponding objects in the lapbAdmnTable.
lapbOperEntry
Currently set parameter values for a specific LAPB.
lapbOperIndex
The ifIndex value for the LAPB interface.
lapbOperStationType
Identifies the current operating station type of this interface. A value of dxe (3) indicates XID negotiation has not yet taken place.
lapbOperControlField
The current operating size of the sequence numbers used to number frames.
lapbOperTransmitN1FrameSize
The current operating N1 frame size used for the maximum number of bits in a frame this DTE can transmit. This excludes flags and 0 bits inserted for transparency.
lapbOperReceiveN1FrameSize
The current operating N1 frame size used for the maximum number of bits in a frame the DCE/remote DTE can transmit. This excludes flags and 0 bits inserted for transparency.
lapbOperTransmitKWindowSize
The current PDU window size this Interface uses to transmit. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from this DTE at any one time.
lapbOperReceiveKWindowSize
The current receive PDU window size for this Interface. This is the maximum number of unacknowledged sequenced PDUs that may be outstanding from the DCE/remote DTE at any one time.
lapbOperN2RxmitCount
The current N2 retry counter used for this interface. This specifies the number of times a PDU will be resent after the T1 timer expires without an acknowledgement for the PDU.
lapbOperT1AckTimer
The current T1 timer for this interface. This specifies the maximum time in Milliseconds to wait for acknowledgment of a PDU.
lapbOperT2AckDelayTimer
The current T2 timer for this interface. This specifies the maximum time in Milliseconds to wait before sending an acknowledgment for a sequenced PDU. A value of zero means there will be no delay in acknowledgement generation.
lapbOperT3DisconnectTimer
The current T3 timer for this interface. This specifies the time in Milliseconds to wait before considering the link disconnected. A value of zero indicates the link will be considered disconnected upon completion of the frame exchange to disconnect the ...
lapbOperT4IdleTimer
The current T4 timer for this interface. This specifies the maximum time in Milliseconds to allow without frames being exchanged on the data link. A value of 2147483647 indicates no idle timer is being kept.
lapbOperPortId
This object identifies an instance of the index object in the first group of objects in the MIB specific to the physical device or interface used to send and receive frames. If an agent does not support any such objects, it should return nullSpec OBJECT ...
lapbOperProtocolVersionId
This object identifies the version of the lapb protocol implemented by this interface.
lapbFlowTable
This table defines the objects recorded by LAPB to provide information about the traffic flow through the interface.
lapbFlowEntry
The information regarding the effects of flow controls in LAPB.
lapbFlowIfIndex
The ifIndex value for the LAPB Interface.
lapbFlowStateChanges
The number of LAPB State Changes, including resets.
lapbFlowChangeReason
The reason for the most recent incrementing of lapbFlowStateChanges. A DM or DISC frame generated to initiate link set-up does not alter this object. When the MIB-II object ifOperStatus does not have a value of testing, there exists a correlation betwee ...
lapbFlowCurrentMode
The current condition of the conversation.
lapbFlowBusyDefers
The number of times this device was unable to transmit a frame due to a perceived remote busy condition. Busy conditions can result from the receipt of an RNR from the remote device, the lack of valid sequence number space (window saturation), or other c ...
lapbFlowRejOutPkts
The number of REJ or SREJ frames sent by this station.
lapbFlowRejInPkts
The number of REJ or SREJ frames received by this station.
lapbFlowT1Timeouts
The number of times a re-transmission was effected by the T1 Timer expiring.
lapbFlowFrmrSent
The Information Field of the FRMR most recently sent. If no FRMR has been sent (the normal case) or the information isn't available, this will be an OCTET STRING of zero length.
lapbFlowFrmrReceived
The Information Field of the FRMR most recently received. If no FRMR has been received (the normal case) or the information isn't available, this will be an OCTET STRING of zero length.
lapbFlowXidReceived
The Information Field of the XID frame most recently received. If no XID frame has been received, this will be an OCTET STRING of zero length.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list