DTI-MIB Download
This MIB module provides the management objects necessary
to configure and manage the DOCSIS Timing Interface
devices.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for DTI-MIB
- dtiProtocolTable
- This table describes the DTI protocol related information contained in Server and Client Frames of a DTI client-server pair.
- dtiProtocolEntry
- A conceptual row entry in the DTI Protocol table. A DTI server has an entry for each client interface. A DTI client has an entry for each server connection. A DTI server (proxy) is a client of the root server DTI input.
- dtiProtocolEntityType
- The type of DTI interface of this entry in the managed entity. 'root' indicates the interface generates DTI Server Frames and processes DTI Client Frames from a proxy server or a client. 'server' indicates the interface generates DTI Server Frames and pro ...
- dtiProtocolClientClockType
- The clock Type of the client as reported in DTI client Frames.
- dtiProtocolServerStatusFlag
- The current Operational Status of the server side of the DTI interface. This MIB object should be updated no more than once per second. The Server reports the status of the DTI interface associated to this entry as follows: 'warmup' The server clock has n ...
- dtiProtocolClientStatusFlag
- The current Operational Status of the client side of the DTI interface. This MIB object should be updated no more than once per second. The Client status values are: 'warmup' The client clock has not stabilized yet. 'freerun' The client has a stable clock ...
- dtiProtocolServerToDState
- Indicates the validity of the Time of Day. Possible values are 'valid' and 'invalid'. When the object dtiProtocolControlToDValue Corresponding to this Client-Server connection or the global object dtiServerGlobalToDValue is set by a manager rather than ac ...
- dtiProtocolServerToDType
- Indicates the current Time of Day source for DTI Server-Client connection. 'default' indicates the ToD of the DTI server is used and implies that this value is not updated via GPS or NTP. 'userTime' indicates the ToD value was configured by the management ...
- dtiProtocolServerToDValue
- The value of the Time of Day sent by the server in the format DDDDD.YYYY/MM/DD.HH:MM:SS.SHH:F.D independent of being transmitted in short or verbose message format in the DTI Server Frame. Reading this object returns the ToD value for the specific DTI Cli ...
- dtiProtocolServerCableAdvanceFlag
- This object indicates the cable advance status of the DTI Server Frame. This object is not updated more than once per second. If dtiProtocolServerCableAdvanceValue is set to a valid value by a manager entity, this objects reports 'manual'.
- dtiProtocolServerCableAdvanceValue
- A Set to zero-length string returns the control of the Cable Advance Field and Cable Advance Flag Bit to the DTI server. Setting this object to a valid value sets the DTI Server Frames Frame Cable Advance field to the specified value and sets the Cable Ad ...
- dtiProtocolClientPhaseError
- The phase error measured at the client as reported to the server in the DTI Client Frames. This object is quantified in units of a 149.8MHz clock cycles. This object represents the 16 MSB bits of the 3 octet Client Clock Integrated Phase field.
- dtiProtocolClientVersion
- This object reports the client DTI protocol version as indicated in the 10-bit field 'CLIENT DTI VERSION'.
- dtiProtocolClientPathTraceability
- A reference to the index of dtiPathTraceabilityTable to which this DTI Client-Server connection has associated its traceable path. It is likely that many traceable paths of DTI clients would have the same rootServer and proxy server for multiple Client Se ...
- dtiProtocolServerClientStableFlag
- This object indicates the client performance stable status of the DTI Server Frame. This object is not updated more than once per second.
- dtiProtocolControlTable
- This table is an extension of dtiProtocolTable for the control of individual DTI Client-Server connections.
- dtiProtocolControlEntry
- A conceptual row entry of this table.
- dtiProtocolControlTimeInterval
- The time interval used to calculate dtiProtocolPerformanceDelay and dtiProtocolPerformanceWanderTSeconds for this Client-Server connection. The value zero indicates the Wander for T Seconds and Protocol Delay is not calculated.
- dtiProtocolControlErrorRateInterval
- The time interval used to calculate the value of dtiProtocolPerformanceFrameErrorRate for this Client-Server connection. The value zero indicates no current FER measurements are being taken.
- dtiProtocolControlJitterTimeInterval
- The time interval used to calculate dtiProtocolPerformancePeakToPeakJitter for this Client-Server connection. The value zero indicates no Jitter measurements are being taken.
- dtiProtocolControlTestMode
- If set to 'true' starts the sequence of Test Mode on this DTI Client-Server connection. The Test Mode consist in a sequence of all DTI frames set to '1' before the Manchester line code is applied.
- dtiProtocolControlToDValue
- The control object to specify a particular ToD value to a Client-Server connection. The format of this object is DDDDD.YYYY/MM/DD.HH:MM:SS.SHH:F.D independent of being transmitted in short or verbose message format in the DTI Server Frame. Setting this ob ...
- dtiProtocolPerformanceTable
- The DTI protocol performance metrics of a DTI Client-Server Connection. In the DTI server an entry of this table registers the DTI Client frames performance. In the DTI client the measurements correspond to the DTI server frames performance.
- dtiProtocolPerformanceEntry
- A conceptual row entry in the DTI performance table. This table is an extension of dtiProtocolTable for entries with dtiProtocolEntityType equals to 'root' and 'server'.
- dtiProtocolPerformanceDelay
- The roundtrip delay measured in nanoseconds.
- dtiProtocolPerformanceFrameErrorRate
- Frame Error Rate (FER) corresponds to the ratio of DTI protocol frames in error and the total of frames received during a period of time. Frames in error and total frames correspond to the delta of ifErrors and ifUcastPackets MIB objects respectively duri ...
- dtiProtocolPerformancePeakToPeakJitter
- The maximum phase variation (with frequency components > 10 Hz) in the client frame with respect to the master clock and reported in the DTI client frame for the time interval specified in dtiProtocolControlJitterTimeInterval object.
- dtiProtocolPerformanceWander35Second
- The largest wander value observed by the server in a 35-second interval for the corresponding Client-Server connection.
- dtiProtocolPerformanceWanderTSeconds
- The largest wander value observed by the server in a time interval defined by dtiWanderTimeInterval for the corresponding Client-Server connection.
- dtiProtocolClientFsmStatsTable
- Statistics associated to the DTI client state machine. This table contains counters of the most significant DTI finite State machine transitions and states as reported in the DTI Client Frame. Below is a description of the State Transition and counters su ...
- dtiProtocolClientFsmStatsEntry
- A conceptual row entry in the DTI FSM Statistics table. In the DTI Server (proxy) this table has an entry for each DTI client interface as well as an entry for each Server (proxy) interface to root server. In the DTI client there is an entry for each clie ...
- dtiProtocolClientFsmStatsT3Count
- Counts the Transition from Fast to Free-run state (T3). This transition occurs when the client aborts the clock acquisition due to a high Frame Error Rate.
- dtiProtocolClientFsmStatsT4Count
- Counts the Transition from Fast to Normal state (T4). This transition occurs when the client acquires for the first time or recovers a stable clock reference.
- dtiProtocolClientFsmStatsT6Count
- Counts the Transition from Bridging to Normal state (T6). This transition occurs when in Bridging mode the Frame Error rate is reduced and the DTI client recovers the clock reference before a bridging mode timeout.
- dtiProtocolClientFsmStatsT7Count
- Counts the Transition from Bridging to Holdover state (T7). This transition occurs when the client is in Bridging mode, the bridging timeout expires and the DTI client enters in Holdover mode.
- dtiProtocolClientFsmStatsNormalActiveTime
- The cumulative count in 10 KHz clock cycles the DTI client is being in Normal Mode. The percentage of time the DTI client is being operating in Normal Mode is calculated as the ratio of this object and sysUpTime within two consecutive measurements. Note t ...
- dtiProtocolClientFsmStatsHoldoverActiveTime
- The cumulative count in 10 KHz clock cycles the DTI client is being in Holdover Mode. The percentage of time the DTI client is being operating in Holdover Mode is calculated as the ratio of this object and sysUpTime within two consecutive measurements. No ...
- dtiPathTraceabilityTable
- The Traceable Path information sent from the DTI server to the client. The traceability path includes node information about DTI root server and DTI server (proxy). The entries of this table are pointed by dtiProtocolTable in both DTI Server and Client. T ...
- dtiPathTraceabilityEntry
- A conceptual row entry in the DTI Path Traceability table. This table is an expansion of the dtiProtocolTable for entries with dtiProtocolEntityType equal to 'server' and 'client'.
- dtiPathTraceabilityIndex
- The index of this conceptual entry.
- dtiPathTraceabilityRootServerInetAddrType
- The type of internet address for dtiPathTraceabilityRootServerInetAddr.
- dtiPathTraceabilityRootServerInetAddr
- The IP address of the clock synchronization root server. If this management entity has dtiServerExternalSource 'notExternal' this value returns an empty octet string and dtiPathTraceabilityRootServerInetAddrType. The type of this address is determined by ...
- dtiPathTraceabilityRootServerOutPhyIdx
- The physical port number of the clock synchronization root server.
- dtiPathTraceabilityServerInetAddrType
- The type of internet address for dtiPathTraceabilityServerInetAddr.
- dtiPathTraceabilityServerInetAddr
- The IP address of the clock synchronization server associated with this management entity. The type of this address is determined by the value of the dtiPathTraceabilityServerInetAddrType object.
- dtiPathTraceabilityServerOutPhyIdx
- The physical port number of the clock synchronization server associated with this management entity.
- dtiPathTraceabilityRootServerProtVersion
- The DTI Protocol Version of the clock synchronization root server.
- dtiPathTraceabilityServerProtVersion
- The DTI Protocol Version of the clock synchronization server associated with this management entity.
- dtiServerRootClockType
- The clock type of the root server this server is connected. If dtiServerHopCount is 'root' the clock type is the self clock. 'ituI' corresponds to an ITU Type I clock. 'ituII' corresponds to an ITU Type II clock. 'ituIII' corresponds to an ITU Type III cl ...
- dtiServerHopCount
- This object indicates the type of the DTI server. 'root' indicates the server is the DTI root server. 'proxy' indicates the DTI server is connected to a root DTI server.
- dtiServerExternalTimingSource
- The type of external clock that provides the reference for this DTI server. 'none' indicates the DTI server has no timing reference input. 'gps' indicates the timing source is GPS. 'network' indicates the timing is obtained from a network such as a PDH, o ...
- dtiServerToDSources
- Indicates the DTI Server's registered Time of Day sources. A bit set to '1' has the following meaning: 'default' the internal DTI Server ToD reference without external updates. 'userTime' indicates the capability of ToD being set by a manager entity eithe ...
- dtiServerGlobalTimeInterval
- The time interval used to calculate dtiProtocolPerformanceDelay and dtiProtocolPerformanceWanderTSeconds for all Client-Server connections of the managed system. A set to this object overrides all the entries of dtiProtocolControlTimeInterval previously c ...
- dtiServerGlobalErrorRateInterval
- The time interval used to calculate the value of dtiProtocolPerformanceFrameErrorRate for all Client-Server connections of the managed system. A set to this object overrides all the entries of dtiProtocolControlErrorRateInterval previously configured. The ...
- dtiServerGlobalJitterTimeInterval
- The time interval used to calculate dtiProtocolPerformancePeakToPeakJitter for all Client-Server connections of the managed system. A set to this object overrides all the entries of dtiProtocolControlErrorRateInterval previously configured. The value zero ...
- dtiServerGlobalToDMethod
- Selects the type of ToD Source for the DTI server operation. The set of this object to its enumerated values is described below: 'default' instructs the DTI server to use the last ToD reference as the value for its internal clock. 'userTime' instructs the ...
- dtiServerGlobalToDValue
- The control object to specify the ToD value for all DTI server Client-Server connections. The format of this object is DDDDD.YYYY/MM/DD.HH:MM:SS.SHH:F.D independent of being transmitted in short or verbose message format in the DTI Server Frame. A set of ...
- dtiBaseGroup
- Group of object applicable to DTI Server and DTI Client.
- dtiServerGroup
- Group of objects applicable to DTI Server only.
- dtiClientGroup
- Group of objects applicable to DTI Client.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
