DS3-MIB

DS3-MIB Download

MIBs list

The is the MIB module that describes DS3 and E3 interfaces objects.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for DS3-MIB

dsx3ConfigTable
The DS3/E3 Configuration table.
dsx3ConfigEntry
An entry in the DS3/E3 Configuration table.
dsx3LineIndex
This object should be made equal to ifIndex. The next paragraph describes its previous usage. Making the object equal to ifIndex allows propoer use of ifStackTable. Previously, this object was the identifier of a DS3/E3 Interface on a managed device. If ...
dsx3IfIndex
This value for this object is equal to the value of ifIndex from the Interfaces table of MIB II (RFC 1213).
dsx3TimeElapsed
The number of seconds that have elapsed since the beginning of the near end current error- measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will re ...
dsx3ValidIntervals
The number of previous near end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute near end intervals since the i ...
dsx3LineType
This variable indicates the variety of DS3 C-bit or E3 application implementing this interface. The type of interface affects the interpretation of the usage and error statistics. The rate of DS3 is 44.736 Mbps and E3 is 34.368 Mbps. The dsx3ClearChanne ...
dsx3LineCoding
This variable describes the variety of Zero Code Suppression used on this interface, which in turn affects a number of its characteristics. dsx3B3ZS and e3HDB3 refer to the use of specified patterns of normal bits and bipolar violations which are used to ...
dsx3SendCode
This variable indicates what type of code is being sent across the DS3/E3 interface by the device. (These are optional for E3 interfaces.) Setting this variable causes the interface to begin sending the code requested. The values mean: dsx3SendNoCode sen ...
dsx3CircuitIdentifier
This variable contains the transmission vendor's circuit identifier, for the purpose of facilitating troubleshooting.
dsx3LoopbackConfig
This variable represents the desired loopback configuration of the DS3/E3 interface. The values mean: dsx3NoLoop Not in the loopback state. A device that is not capable of performing a loopback on the interface shall always return this as its value. dsx3 ...
dsx3LineStatus
This variable indicates the Line Status of the interface. It contains loopback state information and failure state information. The dsx3LineStatus is a bit map represented as a sum, therefore, it can represent multiple failures and a loopback (see dsx3L ...
dsx3TransmitClockSource
The source of Transmit Clock. loopTiming indicates that the recovered receive clock is used as the transmit clock. localTiming indicates that a local clock source is used or that an external clock is attached to the box containing the interface. throughTi ...
dsx3InvalidIntervals
The number of intervals in the range from 0 to dsx3ValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
dsx3LineLength
The length of the ds3 line in meters. This object provides information for line build out circuitry if it exists and can use this object to adjust the line build out.
dsx3LineStatusLastChange
The value of MIB II's sysUpTime object at the time this DS3/E3 entered its current line status state. If the current state was entered prior to the last re-initialization of the proxy-agent, then this object contains a zero value.
dsx3LineStatusChangeTrapEnable
Indicates whether dsx3LineStatusChange traps should be generated for this interface.
dsx3LoopbackStatus
This variable represents the current state of the loopback on the DS3 interface. It contains information about loopbacks established by a manager and remotely from the far end. The dsx3LoopbackStatus is a bit map represented as a sum, therefore is can re ...
dsx3Channelization
Indicates whether this ds3/e3 is channelized or unchannelized. The value of enabledDs1 indicates that this is a DS3 channelized into DS1s. The value of enabledDs3 indicated that this is a DS3 channelized into DS2s. Setting this object will cause the cr ...
dsx3Ds1ForRemoteLoop
Indicates which ds1/e1 on this ds3/e3 will be indicated in the remote ds1 loopback request. A value of 0 means no DS1 will be looped. A value of 29 means all ds1s/e1s will be looped.
dsx3CurrentTable
The DS3/E3 current table contains various statistics being collected for the current 15 minute interval.
dsx3CurrentEntry
An entry in the DS3/E3 Current table.
dsx3CurrentIndex
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3CurrentPESs
The counter associated with the number of P-bit Errored Seconds.
dsx3CurrentPSESs
The counter associated with the number of P-bit Severely Errored Seconds.
dsx3CurrentSEFSs
The counter associated with the number of Severely Errored Framing Seconds.
dsx3CurrentUASs
The counter associated with the number of Unavailable Seconds.
dsx3CurrentLCVs
The counter associated with the number of Line Coding Violations.
dsx3CurrentPCVs
The counter associated with the number of P-bit Coding Violations.
dsx3CurrentLESs
The number of Line Errored Seconds.
dsx3CurrentCCVs
The number of C-bit Coding Violations.
dsx3CurrentCESs
The number of C-bit Errored Seconds.
dsx3CurrentCSESs
The number of C-bit Severely Errored Seconds.
dsx3IntervalTable
The DS3/E3 Interval Table contains various statistics collected by each DS3/E3 Interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals. Each row in this table represents one such interval (id ...
dsx3IntervalEntry
An entry in the DS3/E3 Interval table.
dsx3IntervalIndex
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3IntervalNumber
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
dsx3IntervalPESs
The counter associated with the number of P-bit Errored Seconds.
dsx3IntervalPSESs
The counter associated with the number of P-bit Severely Errored Seconds.
dsx3IntervalSEFSs
The counter associated with the number of Severely Errored Framing Seconds.
dsx3IntervalUASs
The counter associated with the number of Unavailable Seconds. This object may decrease if the occurance of unavailable seconds occurs across an inteval boundary.
dsx3IntervalLCVs
The counter associated with the number of Line Coding Violations.
dsx3IntervalPCVs
The counter associated with the number of P-bit Coding Violations.
dsx3IntervalLESs
The number of Line Errored Seconds (BPVs or illegal zero sequences).
dsx3IntervalCCVs
The number of C-bit Coding Violations.
dsx3IntervalCESs
The number of C-bit Errored Seconds.
dsx3IntervalCSESs
The number of C-bit Severely Errored Seconds.
dsx3IntervalValidData
This variable indicates if the data for this interval is valid.
dsx3TotalTable
The DS3/E3 Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
dsx3TotalEntry
An entry in the DS3/E3 Total table.
dsx3TotalIndex
The index value which uniquely identifies the DS3/E3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3TotalPESs
The counter associated with the number of P-bit Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalPSESs
The counter associated with the number of P-bit Severely Errored Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalSEFSs
The counter associated with the number of Severely Errored Framing Seconds, encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalUASs
The counter associated with the number of Unavailable Seconds, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalLCVs
The counter associated with the number of Line Coding Violations encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalPCVs
The counter associated with the number of P-bit Coding Violations, encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalLESs
The number of Line Errored Seconds (BPVs or illegal zero sequences) encountered by a DS3/E3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalCCVs
The number of C-bit Coding Violations encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalCESs
The number of C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3TotalCSESs
The number of C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3FarEndConfigTable
The DS3 Far End Configuration Table contains configuration information reported in the C-bits from the remote end.
dsx3FarEndConfigEntry
An entry in the DS3 Far End Configuration table.
dsx3FarEndLineIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3FarEndEquipCode
This is the Far End Equipment Identification code that describes the specific piece of equipment. It is sent within the Path Identification Message.
dsx3FarEndLocationIDCode
This is the Far End Location Identification code that describes the specific location of the equipment. It is sent within the Path Identification Message.
dsx3FarEndFrameIDCode
This is the Far End Frame Identification code that identifies where the equipment is located within a building at a given location. It is sent within the Path Identification Message.
dsx3FarEndUnitCode
This is the Far End code that identifies the equipment location within a bay. It is sent within the Path Identification Message.
dsx3FarEndFacilityIDCode
This code identifies a specific Far End DS3 path. It is sent within the Path Identification Message.
dsx3FarEndCurrentTable
The DS3 Far End Current table contains various statistics being collected for the current 15 minute interval. The statistics are collected from the far end block error code within the C- bits.
dsx3FarEndCurrentEntry
An entry in the DS3 Far End Current table.
dsx3FarEndCurrentIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx3LineIndex.
dsx3FarEndTimeElapsed
The number of seconds that have elapsed since the beginning of the far end current error-measurement period. If, for some reason, such as an adjustment in the system's time-of-day clock, the current interval exceeds the maximum value, the agent will retu ...
dsx3FarEndValidIntervals
The number of previous far end intervals for which data was collected. The value will be 96 unless the interface was brought online within the last 24 hours, in which case the value will be the number of complete 15 minute far end intervals since the int ...
dsx3FarEndCurrentCESs
The counter associated with the number of Far Far End C-bit Errored Seconds.
dsx3FarEndCurrentCSESs
The counter associated with the number of Far End C-bit Severely Errored Seconds.
dsx3FarEndCurrentCCVs
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.
dsx3FarEndCurrentUASs
The counter associated with the number of Far End unavailable seconds.
dsx3FarEndInvalidIntervals
The number of intervals in the range from 0 to dsx3FarEndValidIntervals for which no data is available. This object will typically be zero except in cases where the data for some intervals are not available (e.g., in proxy situations).
dsx3FarEndIntervalTable
The DS3 Far End Interval Table contains various statistics collected by each DS3 interface over the previous 24 hours of operation. The past 24 hours are broken into 96 completed 15 minute intervals.
dsx3FarEndIntervalEntry
An entry in the DS3 Far End Interval table.
dsx3FarEndIntervalIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx3LineIndex.
dsx3FarEndIntervalNumber
A number between 1 and 96, where 1 is the most recently completed 15 minute interval and 96 is the 15 minutes interval completed 23 hours and 45 minutes prior to interval 1.
dsx3FarEndIntervalCESs
The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface in one of the previous 96, individual 15 minute, intervals. In the case where the agent is a proxy and data is not available, return noSuchInstance.
dsx3FarEndIntervalCSESs
The counter associated with the number of Far End C-bit Severely Errored Seconds.
dsx3FarEndIntervalCCVs
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count.
dsx3FarEndIntervalUASs
The counter associated with the number of Far End unavailable seconds.
dsx3FarEndIntervalValidData
This variable indicates if the data for this interval is valid.
dsx3FarEndTotalTable
The DS3 Far End Total Table contains the cumulative sum of the various statistics for the 24 hour period preceding the current interval.
dsx3FarEndTotalEntry
An entry in the DS3 Far End Total table.
dsx3FarEndTotalIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable. The interface identified by a particular value of this index is identical to the interface identified by the same value of dsx3LineIndex.
dsx3FarEndTotalCESs
The counter associated with the number of Far End C-bit Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3FarEndTotalCSESs
The counter associated with the number of Far End C-bit Severely Errored Seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3FarEndTotalCCVs
The counter associated with the number of Far End C-bit Coding Violations reported via the far end block error count encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3FarEndTotalUASs
The counter associated with the number of Far End unavailable seconds encountered by a DS3 interface in the previous 24 hour interval. Invalid 15 minute intervals count as 0.
dsx3FracTable
This table is deprecated in favour of using ifStackTable. Implementation of this table was optional. It was designed for those systems dividing a DS3/E3 into channels containing different data streams that are of local interest. The DS3/E3 fractional tab ...
dsx3FracEntry
An entry in the DS3 Fractional table.
dsx3FracIndex
The index value which uniquely identifies the DS3 interface to which this entry is applicable The interface identified by a particular value of this index is the same interface as identified by the same value an dsx3LineIndex object instance.
dsx3FracNumber
The channel number for this entry.
dsx3FracIfIndex
An index value that uniquely identifies an interface. The interface identified by a particular value of this index is the same interface as identified by the same value an ifIndex object instance. If no interface is currently using a channel, the value ...
ds3NearEndConfigGroup
A collection of objects providing configuration information applicable to all DS3/E3 interfaces.
ds3NearEndStatisticsGroup
A collection of objects providing statistics information applicable to all DS3/E3 interfaces.
ds3FarEndGroup
A collection of objects providing remote configuration and statistics information applicable to C-bit Parity and SYNTRAN DS3 interfaces.
ds3DeprecatedGroup
A collection of obsolete objects that may be implemented for backwards compatibility.
ds3NearEndOptionalConfigGroup
A collection of objects that may be implemented on DS3/E3 interfaces.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list