DOCS-LOADBAL3-MIB Download

docsLoadbal3SystemEnable

This attribute when set to 'true' enables Autonomous Load Balancing operation on the CMTS, otherwise Autonomous Load Balancing is disabled. A failure to enable Autonomous Load Balancing operation is registered in the EnableError attribute. When Autonomous ...

docsLoadbal3SystemEnableError

This attribute represents a text message that describes a failure to enable load balancing due configuration errors, or other considerations. The zero-length string indicates no errors occurred during the last Autonomous Load Balancing activation.

docsLoadbal3ChgOverGroupMacAddress

This attribute represents the MAC address of the cable modem that the CMTS instructs to move to a new downstream and/or upstream channel set.

docsLoadbal3ChgOverGroupInitTech

This attribute represents the initialization technique that the cable modem is instructed to use when performing multiple-channel change-over operation. The value of this attribute applies to all upstream channels in the channel set.

docsLoadbal3ChgOverGroupForceUCC

This attribute when set to 'true' indicates that the CMTS forces UCC messages instead of DCC messages. In some cases the CMTS may still use UCC commands even though this attribute value is 'false', for example in an upstream-only change-over operation dir ...

docsLoadbal3ChgOverGroupdownFrequency

This attribute represents a single-downstream frequency to which the cable modem is instructed to move using a DCC request. The value zero indicates that this attribute is ignored during a commit operation.

docsLoadbal3ChgOverGroupMdIfIndex

This attribute describes the MAC Domain Interface index of the triplet: Mac Domain, RCP-ID and RCC Status Index of the RccStatus object that represents the RCC used in the change-over operation. This MAC Domain Interface Index is also used to provide con ...

docsLoadbal3ChgOverGroupRcpId

This attribute describes the RCP-ID of the triplet: Mac Domain, RCP-ID and RCC Status Index of the RccStatus object that represents the RCC used in the change-over operation.

docsLoadbal3ChgOverGroupRccId

This attribute describes the RCC Status Index of the triplet: Mac Domain, RCP-ID and RCC Status Index of the RccStatus object that represents the RCC used in the change-over operation.

docsLoadbal3ChgOverGroupUsChSet

This attribute describes the Channel list (within the context of the MAC domain identified by MdIfIndex) that represents the final TCS expected from the change-over operation. When the operation is intended for an RCC-only, this attribute is set to zero a ...

docsLoadbal3ChgOverGroupServiceFlowInfo

This attribute provides a list of Service Flow ID-Channel Set ID pairs used to control Service Flow assignment in the change-over operation. This is intended as an override to the normal assignment based on SF attributes. This attribute is encoded as a s ...

docsLoadbal3ChgOverGroupTransactionId

This attribute represents an operator identifier for the change-over operation to be used to correlate logged information in the ChangeOver3 Status object. The CMTS uses this value as the Transaction ID in the DBC-REQ or DCC-REQ message transmitted in ass ...

docsLoadbal3ChgOverGroupCommit

This attribute when set to 'true' triggers the change-over operation for Externally-Directed Load Balancing. Setting this attribute to 'true' is known as a commit operation. A commit operation is considered successful if the CMTS considers that the entere ...

docsLoadbal3ChgOverGroupLastCommit

The value of sysUpTime when the attribute Commit was last set to true. Zero if never set.

docsLoadbal3ChgOverStatusTable

This object reports the status of cable modems instructed to move to a new downstream and/or upstream channel or channel sets when commanded either by an operation in the ChgOver object. An instance in this object is created for each change-over operation ...

docsLoadbal3ChgOverStatusEntry

The conceptual row of docsLoadbal3ChgOverStatus.

docsLoadbal3ChgOverStatusId

This key represents a monotonically increasing value for the record that stores the status of the change-over operation. When the ChOverStatus object exceeds the size limit of this object the lowest Id value instances are removed so that the total number ...

docsLoadbal3ChgOverStatusMacAddr

This attribute represents the Mac address set in the ChgOver object commit operation.

docsLoadbal3ChgOverStatusInitTech

The initialization technique set in change-over operation.

docsLoadbal3ChgOverStatusDownFrequency

This attribute represents the new downstream frequency to which the cable modem is instructed to move. The value 0 indicates that the CMTS does not create a TLV for the downstream frequency in the DCC-REQ message. This object has no meaning when executing ...

docsLoadbal3ChgOverStatusMdIfIndex

This attribute represents the MAC Domain Interface index set in the ChgOver3 object commit operation, or zero.

docsLoadbal3ChgOverStatusRcpId

This attribute represents the RCP-ID set in the MultipleChChgOver object commit operation, or all zeros RCP-ID.

docsLoadbal3ChgOverStatusRccId

This attribute represents the RCC Status Index set in the ChgOver3 object commit operation, or zero.

docsLoadbal3ChgOverStatusUsChSet

This attribute represents the Upstream Channel Set ID in the ChgOver3 object commit operation, or zero.

docsLoadbal3ChgOverStatusServiceFlowInfo

This attribute represents the list of Service Flow-Channel Set ID pairs set in the ChgOver object commit operation, or zero-length string.

docsLoadbal3ChgOverStatusCmd

The load balancing MAC Management Message exchange type used by the CMTS for the change-over operation in the ChgOver object commit operation. - 'ucc' indicates the usage of Upstream Channel Change (UCC) messages exchange. - 'dcc' indicates the usage of D ...

docsLoadbal3ChgOverStatusTransactionId

This attribute represents the transaction Id value used in the change-over operation.

docsLoadbal3ChgOverStatusValue

This attribute represents the status of the specified change-over operation. The enumerations are: Change-over using DCC message exchange: 'modemDeparting' The cable modem has responded with a change-over response of either a DCC-RSP with a confirmation ...

docsLoadbal3ChgOverStatusUpdate

The value of sysUpTime when the attribute value of this instance was last updated.

docsLoadbal3CmtsCmParamsTable

This object represents the autonomous load balancing parameters provisioned for cable modem. The CMTS selects the cable modem Load Balancing Group (GrpId attribute of this object) from multiple sources by following the rules and sequence described below: ...

docsLoadbal3CmtsCmParamsEntry

The conceptual row of docsLoadbal3CmtsCmParams.

docsLoadbal3CmtsCmParamsProvGrpId

This attribute indicates the provisioned Load Balancing Group ID TLV the CM signaled to the CMTS during registration, or zero if not provisioned in the CM.

docsLoadbal3CmtsCmParamsCurrentGrpId

This attribute references the Load Balancing Group Identifier (Id attribute from the GrpStatus object) associated with the cable modem after the CMTS validates the CM Load Balancing Group ID TLV, Service Type ID TLV and Restricted CM list. The value zero ...

docsLoadbal3CmtsCmParamsProvServiceTypeID

This attribute indicates the provisioned Service Type ID TLV the CM signaled to the CMTS during registration, or the zero-length string if not provisioned in the CM.

docsLoadbal3CmtsCmParamsCurrentServiceTypeID

This attribute represents the Service Type ID the CMTS picked from the Restricted Group of Restricted CM list, or the Service Type Id TLV the CM signaled to the CMTS during registration, or the zero-length string if none was used.

docsLoadbal3CmtsCmParamsPolicyId

This attribute references the Load Balancing Policy ID associated to the cable modem either from the configuration file or from the General or Restricted Load Balancing Groups CMTS configuration.

docsLoadbal3CmtsCmParamsPriority

This attribute references the Load Balancing Priority associated to the cable modem either from the configuration file or from the General or Restricted Load Balancing Groups CMTS configuration.

docsLoadbal3GeneralGrpDefaultsEnable

This attribute represents the default value for the Enable attribute of the GeneralLoadBalGrp object.

docsLoadbal3GeneralGrpDefaultsPolicyId

This attribute represents the default value for the PolicyId attribute of the GeneralLoadBalGrp object.

docsLoadbal3GeneralGrpDefaultsInitTech

This attribute represents the default value for the InitTechnique attribute of the GeneralLoadBalGrp object.

docsLoadbal3GeneralGrpCfgTable

This object provides the parameters for the General Load Balancing Groups of MD-CM-SGs associated with MAC Domain-Fiber Node pairs. This object allows configuration of load balancing parameters for General Load Balancing Groups by way of MAC Domain-Fiber ...

docsLoadbal3GeneralGrpCfgEntry

The conceptual row of docsLoadbal3GeneralGrpCfg. The CMTS MUST persist all instances of GeneralGrpCfg across reinitializations.

docsLoadbal3GeneralGrpCfgNodeName

This key represents the fiber node name being associated with a MAC Domain.

docsLoadbal3GeneralGrpCfgEnable

This attribute when set to 'true' enables Autonomous Load Balancing for the General Load Balancing Group associated with this instance. When set to 'false' Autonomous Load Balancing is disabled.

docsLoadbal3GeneralGrpCfgPolicyId

This attribute defines the default load balancing policy for the General Load Balancing Group associated with this instance.

docsLoadbal3GeneralGrpCfgInitTech

This attribute defines the load balancing initialization technique for the General Load Balancing Group associated with this instance.

docsLoadbal3GeneralGrpCfgStatus

The conceptual row status of this object.

docsLoadbal3ResGrpCfgTable

This object represents the configuration of Restricted Load Balancing Groups.

docsLoadbal3ResGrpCfgEntry

The conceptual row of docsLoadbal3ResGrpCfg. The CMTS MUST persist all instances of ResGrpCfg across reinitializations.

docsLoadbal3ResGrpCfgId

This key represents a unique index assigned to the Restricted Load Balancing Group by the user for provisioning purposes. This value is unique within a CMTS and is matched with the CM signaled Load Balancing Group ID TLV value when determining the CM Load ...

docsLoadbal3ResGrpCfgMdIfIndex

This attribute represents the MAC domain where the Restricted Load balancing Group applies. The value zero is allowed to indicate that vendor-specific mechanisms are used to define the Restricted Load Balancing Group. For example, to provide Load Balancin ...

docsLoadbal3ResGrpCfgDsChList

This attribute contains the list of downstream channels of the Restricted Load Balancing Group.

docsLoadbal3ResGrpCfgUsChList

This attribute contains the list of upstream channels of the Restricted Load Balancing Group.

docsLoadbal3ResGrpCfgEnable

This attribute when set to 'true' enables Autonomous Load Balancing on this Restricted Load Balancing Group. The value 'false' disables the load balancing operation on this group.

docsLoadbal3ResGrpCfgInitTech

This attribute represents the initialization techniques that the CMTS can use to load balance cable modems in the Load Balancing Group.

docsLoadbal3ResGrpCfgPolicyId

This attribute represents the default load balancing policy of this Restricted Load Balancing Group. A policy is described by a set of conditions (rules) that govern the load balancing process for a cable modem. The CMTS assigns this Policy ID value to a ...

docsLoadbal3ResGrpCfgServiceTypeId

This attribute represent a space separated list of ServiceType IDs that will be compared against the cable modem provisioned Service Type ID to determine the most appropriate Restricted Load Balancing Group.

docsLoadbal3ResGrpCfgStatus

The conceptual row status of this object.

docsLoadbal3GrpStatusTable

This object represents the status of all General and Restricted Load Balancing Groups in this CMTS. This object summarizes the load balancing parameters that applies to CMTS system wide Load Balancing Groups. The Load Balancing Groups defined in this obje ...

docsLoadbal3GrpStatusEntry

The conceptual row of docsLoadbal3GrpStatus.

docsLoadbal3GrpStatusId

This key represents an unique identifier of a Load Balancing Group in the CMTS.

docsLoadbal3GrpStatusCfgIdOrZero

This attribute references the Id attribute of the instance of the ResGrpCfg this instance corresponds to. The value zero indicates that the instance corresponds to a General Load Balancing Group.

docsLoadbal3GrpStatusMdIfIndex

This attribute represents the MAC domain where the Load Balancing Group applies. The value zero is allowed to indicate that vendor-specific mechanisms are used in load balancing operations. For example, to provide Load Balancing Groups across MAC domains.

docsLoadbal3GrpStatusMdCmSgId

This attribute corresponds to the MD-CM-SG-ID that includes all the upstream and downstream channels of the Load Balancing Group. The value zero indicates that this instance corresponds to a Restricted Load Balancing Group . If there are vendor-specific ...

docsLoadbal3GrpStatusDsChList

This attribute contains the list of downstream channels of the Load Balancing Group. If there are vendor-specific Load Balancing Groups configuration ( e.g. MdIfIndex set to zero), this attribute value might not be meaningful.

docsLoadbal3GrpStatusUsChList

This attribute contains the list of the upstream channels of the Load Balancing Group. If there are vendor-specific Load Balancing Groups configuration ( e.g. MdIfIndex set to zero), this attribute value might not be meaningful.

docsLoadbal3GrpStatusEnable

This attribute when set to 'true' indicates that load balancing is enabled on this group, or disabled if set to 'false'.

docsLoadbal3GrpStatusInitTech

This attribute indicates the initialization techniques that the CMTS can use when load balancing cable modems that are associated with the Load Balancing Group.

docsLoadbal3GrpStatusPolicyId

This attribute indicates the Policy that the CMTS can use when load balancing cable modems that are associated with the Load Balancing Group.

docsLoadbal3GrpStatusChgOverSuccess

This attribute counts the number of successful Autonomous Load Balancing operations associated with this Load Balancing Group.

docsLoadbal3GrpStatusChgOverFails

This attribute counts the number of failed Autonomous load balancing operations associated with this Load Balancing Group.

docsLoadbal3RestrictCmCfgTable

This object describes the list of cable modems being statically provisioned at the CMTS to a Restricted Load Balancing Group. When a CM registers it is either assigned to

docsLoadbal3RestrictCmCfgEntry

The conceptual row of docsLoadbal3RestrictCmCfg. The CMTS MUST persist all instances of RestrictCmCfg across reinitializations.

docsLoadbal3RestrictCmCfgId

This key represents the unique identifier of an instance in this object. the CMTS maintains an unique instance per MAC Address/MAC Address Mask combination

docsLoadbal3RestrictCmCfgMacAddr

This attribute represents the Mac Address of the cable modem within the Restricted Load Balancing Group.

docsLoadbal3RestrictCmCfgMacAddrMask

This attribute corresponds to a bit mask acting as a wild card to associate a cable modem MAC addresses to a Restricted Load Balancing Group ID referenced by a restricted group Id or a Service Type ID. The cable modem matching criteria is performed by bi ...

docsLoadbal3RestrictCmCfgGrpId

The attribute represents the Restricted Load Balancing Group identifier of this entry associated with the cable modem MAC address - MAC address mask combination. The value zero indicates that the instance is matched only against the ServiceTypeId value.

docsLoadbal3RestrictCmCfgServiceTypeId

This attribute represents the Service Type Id associated with this cable modem MAC address - MAC Address mask combination.. The zero-length string indicates that the instance is matched only against the GrpId value, if both GrpId and this attribute are no ...

docsLoadbal3RestrictCmCfgStatus

Indicates the status of this conceptual object. There is no restriction on setting columns in this table any time.

docsLoadbal3PolicyTable

This object describes the set of load balancing policies. Instances from this object might be referenced by GrpStatus object . All the rules contained in a load balancing policy apply to an Autonomous Load Balancing operations. Load balancing rules are de ...

docsLoadbal3PolicyEntry

The conceptual row of docsLoadbal3Policy. The CMTS MUST persist all instances of Policy object across reinitializations.

docsLoadbal3PolicyId

This key represents the identifier of a load balancing policy.

docsLoadbal3PolicyRuleId

This key represents a rule contained within a balancing policy.

docsLoadbal3PolicyPtr

This attribute represents a reference to an instance in a rule or other policy object like BasicRule object.

docsLoadbal3PolicyRowStatus

The conceptual row status of this object.

docsLoadbal3BasicRuleTable

This object represents a basic ruleset applicable to a load balancing policy that references it.

docsLoadbal3BasicRuleEntry

The conceptual row of docsLoadbal3BasicRule. The CMTS MUST persist all instances of BasicRule object across reinitializations.

docsLoadbal3BasicRuleId

This key represents a unique identifier for balancing ruleset of this object.

docsLoadbal3BasicRuleEnable

This attribute when set to 'enabled' enables Autonomous Load Balancing (independently of the load balancing group enable/disable state), the rule set is disabled if set to 'disabled', or is disabled during a period of time it set to 'disabledPeriod'.

docsLoadbal3BasicRuleDisStart

This attribute disables load balancing from the time stated by this attribute when the attribute Enable is set to 'disablePeriod'. The time is defined in seconds since midnight.

docsLoadbal3BasicRuleDisPeriod

This attribute disables load balancing until the time stated by this attribute when the attribute Enable is set to 'disablePeriod'. The time is defined in seconds of the wall clock since midnight.

docsLoadbal3BasicRuleRowStatus

The conceptual row status of this object.

docsLoadbal3Group

Group of objects implemented in