CPQSM2 Download

cpqSm2MibRevMajor

The Major Revision level of the MIB. A change in the major revision level represents a major change in the architecture of the MIB. A change in the major revision level may indicate a significant change in the information supported and/or the meaning of ...

cpqSm2MibRevMinor

The Minor Revision level of the MIB. A change in the minor revision level may represent some minor additional support, no changes to any pre-existing information has occurred.

cpqSm2MibCondition

Remote Insight/ Integrated Lights-Out condition. This represents the overall condition of the Remote Insight/ Integrated Lights-Out.

cpqSm2OsCommonPollFreq

The Insight Agent's polling frequency. The frequency, in seconds, at which the Insight Agent requests information from the device driver. A frequency of zero (0) indicates that the Insight Agent retrieves the information upon request of a management stat ...

cpqSm2OsCommonModuleTable

A table of software modules that provide an interface to the device this MIB describes.

cpqSm2OsCommonModuleEntry

A description of a software module that provides an interface to the device this MIB describes.

cpqSm2OsCommonModuleIndex

A unique index for this module description.

cpqSm2OsCommonModuleName

The module name.

cpqSm2OsCommonModuleVersion

The module version in XX.YY format. Where XX is the major version number and YY is the minor version number. This field will be null (size 0) string if the agent cannot provide the module version.

cpqSm2OsCommonModuleDate

The module date. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day 1..31 4 ...

cpqSm2OsCommonModulePurpose

The purpose of the module described in this entry.

cpqSm2CntlrRomDate

Remote Insight/ Integrated Lights-Out ROM Date. The firmware date format is mm/dd/yyyy format.

cpqSm2CntlrRomRevision

Remote Insight/ Integrated Lights-Out ROM Revision. The revision of the firmware on the Remote Insight/ Integrated Lights-Out.

cpqSm2CntlrVideoStatus

Remote Insight/ Integrated Lights-Out Video Hardware Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of the Remote Insight/ Integrated Lights-Out video. enabled(2) The Remote Insight/ Integrated Light ...

cpqSm2CntlrBatteryEnabled

Remote Insight Battery Enabled. The following values are defined: other(1) The Insight Agent is unable to determine the status of the Remote Insight battery. enabled(2) The Remote Insight battery is present and is enabled. disabled(3) The Remote Insight b ...

cpqSm2CntlrBatteryStatus

Remote Insight Battery Status. The following values are defined: other(1) The Insight Agent is unable to determine if the battery needs replacement. batteryOk(2) The Remote Insight battery is OK. batteryFailed(3) The Remote Insight battery needs replaceme ...

cpqSm2CntlrBatteryPercentCharged

Remote Insight Battery Percent Charged. The Remote Insight battery recharge level.

cpqSm2CntlrAlertStatus

Remote Insight/ Integrated Lights-Out Alerting Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of Remote Insight alerting. enabled(2) Remote Insight/ Integrated Lights-Out alerting is enabled. disable ...

cpqSm2CntlrPendingAlerts

Pending Remote Insight/ Integrated Lights-Out alerts. The following values are defined: other(1) The Insight Agent is unable to determine the state of Remote Insight pending alerts. noAlertsPending(2) No Remote Insight/ Integrated Lights-Out alerts are pe ...

cpqSm2CntlrSelfTestErrors

Remote Insight/ Integrated Lights-Out Self Test Errors. This is a collection of post error flags. Each bit has the following meaning when it is on (1): Bit 17-31: RESERVED: Always 0. Bit 16: I2C error. Bit 15: EEPROM error. Bit 14: SRAM error. B ...

cpqSm2CntlrAgentLocation

Remote Insight/ Integrated Lights-Out Agent Location. The following values are defined: hostOsAgent(1) The Remote Insight/ Integrated Lights-Out MIB information is provided by the host OS agents. firmwareAgent(2) The Remote Insight/ Integrated Lights-Out ...

cpqSm2CntlrLastDataUpdate

The date and time that the Remote Insight/ Integrated Lights-Out offline data was last updated. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month ...

cpqSm2CntlrDataStatus

Remote Insight/ Integrated Lights-Out Host OS Data Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of the host OS data. noData(2) There is no data available for the host system OS. onlineData(3) Data ...

cpqSm2CntlrColdReboot

Remote Insight/ Integrated Lights-Out Server Cold Reboot The following values are defined: notAvailable(1) Cold reboot of the system is not available. available(2) Cold reboot of the system is available. doColdReboot(3) This value is set to cause a cold r ...

cpqSm2CntlrBadLoginAttemptsThresh

Maximum Unauthorized Login Attempts Threshold. This is the threshold for consecutive unsuccessful login attempts. When this threshold is exceeded, a trap is sent.

cpqSm2CntlrBoardSerialNumber

Remote Insight/ Integrated Lights-Out Serial Number. The Serial Number of this Remote Insight/ Integrated Lights-Out.

cpqSm2CntlrRemoteSessionStatus

Remote Insight/ Integrated Lights-Out Session Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of a Remote Insight session. active(2) A Remote Insight/ Integrated Lights-Out session is active. inactive ...

cpqSm2CntlrInterfaceStatus

Remote Insight/ Integrated Lights-Out Interface Status. The following values are defined: other(1) The Insight Agent is unable to determine the status of the Remote Insight/ Integrated Lights-Out interface. ok(2) The Remote Insight/ Integrated Lights-Out ...

cpqSm2CntlrSystemId

Remote Insight/ Integrated Lights-Out System ID. A number used to identify this system in Remote Insight/ Integrated Lights-Out pager alerts.

cpqSm2CntlrKeyboardCableStatus

Remote Insight Keyboard Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the keyboard cable is connected to the Remote Insight. connected(2) The keyboard cable is connected to the Remote Insight. disconn ...

cpqSm2ServerIpAddress

The IP address for this servers connection to the Remote Insight/ Integrated Lights-Out. This address is used to communicate remotely to the host server via the Remote Insight/ Integrated Lights-Out.

cpqSm2CntlrModel

Remote Insight/ Integrated Lights-Out Model. The following values are defined: other(1) The Insight Agent is unable to determine the model of the Remote Insight/ Integrated Lights-Out. eisaRemoteInsightBoard(2) This is the EISA Remote Insight. pciRemoteIn ...

cpqSm2CntlrSelfTestErrorMask

Remote Insight/ Integrated Lights-Out Self Test Error Mask. Each bit in this mask corresponds to a bit in the MIB variable cpqSm2CntlrSelfTestErrors. If the mask bit is a 1, then the corresponding bit in cpqSm2CntlrSelfTestErrors is relevant to the parti ...

cpqSm2CntlrMouseCableStatus

Remote Insight Mouse Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the mouse cable is connected to the Remote Insight. connected(2) The mouse cable is connected to the Remote Insight. disconnected(3) ...

cpqSm2CntlrVirtualPowerCableStatus

Remote Insight Virtual Power Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the virtual power cable is connected to the Remote Insight. connected(2) The virtual power cable is connected to the Remote I ...

cpqSm2CntlrExternalPowerCableStatus

Remote Insight External Power Cable Status. The following values are defined: other(1) The Insight Agent is unable to determine if the External or Internal power cable connections to the Remote Insight. externallyConnected(2) Just External power cable is ...

cpqSm2CntlrHostGUID

The globally unique identifier of this server. This variable can by used by management stations to correlate the Remote Insight/ Integrated Lights-Out controller to the server containing the controller. This variable is identical to the variable 'cpqHoGU ...

cpqSm2CntlriLOSecurityOverrideSwitchState

Integrated Lights-Out Security Override Switch State. The following values are defined: notSupported(1) The iLO Security Override Switch state is not supported on this model of Integrated Lights-Out. set(2) The iLO Security Override Switch is set, which i ...

cpqSm2CntlrHardwareVer

Hardware Version of Remote Insight/ Integrated Lights-Out.

cpqSm2CntlrAction

Remote Insight/ Integrated Lights-Out Action Flags. This is a collection of flags used to indicate the various options available. ResetSupportBit: If bit-0 is set to 1, the option is available. If bit-0 is set to 0, the option is NOT available. iLOAlerts ...

cpqSm2EventLogTable

A table of event log descriptions.

cpqSm2EventLogEntry

An event log description.

cpqSm2EventLogIndex

An index that uniquely specifies this entry.

cpqSm2EventLogNumber

A number assigned by the Remote Insight/ Integrated Lights-Out firmware.

cpqSm2EventLogDate

The time and date for this event log entry. field octets contents range ===== ====== ======= ===== 1 1-2 year 0..65536 2 3 month 1..12 3 4 day ...

cpqSm2EventLogMessage

The message text for this event log entry.

cpqSm2CommSettingsTable

The list of communication settings for the Remote Insight.

cpqSm2CommSettingsEntry

A defined port's communication settings for the Remote Insight.

cpqSm2CommPort

Remote Insight Communications Port. The following values are defined: internal(1) This is the Remote Insight internal modem port. auxiliary(2) This is the Remote Insight auxiliary port.

cpqSm2CommType

Remote Insight Communications Type. The following values are defined: other(1) The Insight Agent is unable to determine the communications type. none(2) There is nothing configured on this port. modem(3) A modem is configured on this port. nulModem(4) A N ...

cpqSm2CommBaudRate

The baud rate to be used over this communication medium by the Remote Insight.

cpqSm2CommParity

Remote Insight Communications Parity. The following values are defined: other(1) The Insight Agent is unable to determine the parity setting. none(2) This port is set for no parity. odd(3) This port is set for odd parity. even(4) This port is set for even ...

cpqSm2CommDataBits

Remote Insight Communications Data Bits. The following values are defined: other(1) The Insight Agent is unable to determine the data bits setting. sevenBit(2) This port is set for seven data bits. eight(3) This port is set for eight data bits.

cpqSm2CommStopBits

Remote Insight Communications Stop Bits. The following values are defined: other(1) The Insight Agent is unable to determine the stop bits setting. oneBit(2) This port is set for one stop data bit. twoBits(3) This port is set for two stop bits.

cpqSm2CommModemReset

The string that is sent to reset the modem.

cpqSm2CommModemInit

The string that is sent to initialize the modem.

cpqSm2CommModemDialPrefix

The string that is prepended to phone numbers before dialing.

cpqSm2CommPortInit

The string that is sent to the auxiliary port before the modem is reset.

cpqSm2CommDialin

Comm Dial-in. The following values are defined: other(1) The Insight Agent is unable to determine the status of dialin. enabled(2) Dialing in to this modem is enabled. disabled(3) Dialing in to this modem is disabled.

cpqSm2CommDialbackRequired

Remote Insight Dialback Required. The following values are defined: other(1) The Insight Agent is unable to determine the dialback required setting. required(2) Dialback is required for all users. notRequired(3) Dialback is not required. It is optional o ...

cpqSm2CommNonPppConnections

Non-PPP connections. The following values are defined: other(1) The Insight Agent is unable to determine the status of the non-PPP connections variable. enabled(2) Non-PPP connections are allowed on this port. disabled(3) Non-PPP connections are not allow ...

cpqSm2CommSnmpTrapDelivery

SNMP Trap Delivery. The following values are defined: other(1) The Insight Agent is unable to determine the status of SNMP Trap delivery. enabled(2) SNMP trap delivery is enabled. The Remote Insight firmware will use this port to deliver SNMP traps. disa ...

cpqSm2CommPageDelivery

Page Delivery. The following values are defined: other(1) The Insight Agent is unable to determine the status of page delivery. enabled(2) Page delivery is enabled. The Remote Insight firmware will use this port to deliver pages. disabled(3) Page deliver ...

cpqSm2CommPagerBaudRate

The baud rate to be used for pager communications over this medium by the Remote Insight.

cpqSm2CommPagerParity

Remote Insight Communications Pager Parity. The following values are defined: other(1) The Insight Agent is unable to determine the pager parity setting. none(2) This port is set for no parity when paging. odd(3) This port is set for odd parity when pagin ...

cpqSm2CommPagerDataBits

Remote Insight Communications Pager Data Bits. The following values are defined: other(1) The Insight Agent is unable to determine the data bits setting. sevenBit(2) This port is set for seven data bits when paging. eight(3) This port is set for eight dat ...

cpqSm2CommPagerStopBits

Remote Insight Communications Pager Stop Bits. The following values are defined: other(1) The Insight Agent is unable to determine the stop bits setting. oneBit(2) This port is set for one stop data bit when paging. twoBits(3) This port is set for two sto ...

cpqSm2CommPcmciaModel

Remote Insight Network PCMCIA Card Model. This is a NULL terminated ASCII string. If the agent cannot determine the model name, it should return a NULL string.

cpqSm2NicConfigTable

The list of network interface configuration settings for the Remote Insight/ Integrated Lights-Out.

cpqSm2NicConfigEntry

A defined nic's configuration settings for the Remote Insight/ Integrated Lights-Out.

cpqSm2NicLocation

Location of the Network Interface Controller associated with the Remote Insight/ Integrated Lights-Out. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller. embedded(2) This is an embedd ...

cpqSm2NicModel

Remote Insight/ Integrated Lights-Out Network Interface Controller Model. This is a NULL terminated ASCII string. If the agent cannot determine the model name, it should return a NULL string.

cpqSm2NicType

Remote Insight/ Integrated Lights-Out Network Interface Controller Type. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller. ethernet(2) This is an ethernet network interface controller ...

cpqSm2NicMacAddress

The MAC Address of the Network Interface Controller associated with the Remote Insight/ Integrated Lights-Out. This is a 6 octet address in the 'canonical' order defined by IEEE 802.1a, i.e., as if it were transmitted least significant bit first, even tho ...

cpqSm2NicIpAddress

Remote Insight/ Integrated Lights-Out Network Interface Controller IP Address. The IP address for the network interface controller associated with the Remote Insight/ Integrated Lights-Out. All octets should be set to 0xff if there is not an IP address a ...

cpqSm2NicIpSubnetMask

Remote Insight/ Integrated Lights-Out Network Interface Controller Subnet Mask.

cpqSm2NicEnabledStatus

Remote Insight/ Integrated Lights-Out Network Interface Controller Enabled Status The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller enabled status enabled(2) This network interface con ...

cpqSm2NicDuplexState

Remote Insight/ Integrated Lights-Out Network Interface Controller Enabled Status. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller duplex state. halfDuplex(2) This network interface ...

cpqSm2NicSpeed

Remote Insight/ Integrated Lights-Out Network Interface Controller Speed. The speed of the network interface controller in megabits per second.

cpqSm2NicDhcpUse

Remote Insight/ Integrated Lights-Out Network Interface Controller DHCP Usage The following values are defined: other(1) The Insight Agent is unable to determine if DHCP is supported for this network interface controller. enabled(2) DHCP usage is enabled ...

cpqSm2NicCondition

Remote Insight/ Integrated Lights-Out Network Interface Controller condition. This represents the overall condition of the Remote Insight/ Integrated Lights-Out Network Interface Controller (NIC).

cpqSm2NicMtu

Remote Insight/ Integrated Lights-Out Network Interface Maximum Transfer Unit. The maximum packet size (in bytes) of the network interface controller.

cpqSm2NicGatewayIpAddress

Remote Insight/ Integrated Lights-Out Network Interface Controller Default Gateway IP Address. The Default Gateway IP address for the network interface controller associated with the Remote Insight/ Integrated Lights-Out. If cpqSm2NicDhcpUse is enabled(2) ...

cpqSm2NicRibFullQualDnsName

Remote Insight/ Integrated Lights-Out Fully Qualified DNS Name. The Fully Qualified DNS Name assigned to this Remote Insight/ Integrated Lights-Out. This is composed of the DNS name and the Domain name associated with the Remote Insight/ Integrated Lights ...

cpqSm2NicStatsTable

The list of network interface configuration settings for the Remote Insight/ Integrated Lights-Out.

cpqSm2NicStatsEntry

A defined nic's configuration settings for the Remote Insight/ Integrated Lights-Out.

cpqSm2NicStatsLocation

Location of the Network Interface Controller associated with the Remote Insight/ Integrated Lights-Out. The following values are defined: other(1) The Insight Agent is unable to determine type of network interface controller. embedded(2) This is an embedd ...

cpqSm2NicXmitBytes

Remote Insight/ Integrated Lights-Out Network Interface Controller Bytes Transmitted.

cpqSm2NicXmitTotalPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Total Transmit Packets.

cpqSm2NicXmitUnicastPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Unicast Transmit Packets.

cpqSm2NicXmitNonUniPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Non-Unicast Transmit Packets.

cpqSm2NicXmitDiscardPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Total Transmit Discarded Packets.

cpqSm2NicXmitErrorPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Total Error Transmit Packets.

cpqSm2NicXmitQueueLength

Remote Insight/ Integrated Lights-Out Network Interface Controller Number of Outstanding Packets in Transmit Queue.

cpqSm2NicRecvBytes

Remote Insight/ Integrated Lights-Out Network Interface Controller Bytes Received.

cpqSm2NicRecvTotalPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Total Receive Packets.

cpqSm2NicRecvUnicastPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Unicast Receive Packets.

cpqSm2NicRecvNonUniPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Non-Unicast Receive Packets.

cpqSm2NicRecvDiscardPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Total Receive Discarded Packets.

cpqSm2NicRecvErrorPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Total Receive Error Packets.

cpqSm2NicRecvUnknownPackets

Remote Insight/ Integrated Lights-Out Network Interface Controller Number of Unknown Protocol Packets.