CISCO-WAN-SRM-MIB Download
The MIB module for configuration of bulk distribution
(de-multiplexing of traffic from higher-bandwidth to
lower-bandwidth interfaces).
This is used for configuring bulk distribution of
T3 interfaces on T1 modules supported in MGX82xx series.
Some of the T1 modules are AUSM, FRSM,CESM.
This MIB module also contains info. on configuring
bulk distribution of SONET interfaces(VT interfaces)
on T1 Modules.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-WAN-SRM-MIB
- srm3T3CnfGrpTable
- The SRM 3T3 configuration table, it is the distribution of a T3 line. ::= { srm3T3CnfGrp 1 } SYNTAX Srm3T3CnfGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION an entry in the T3 configuration table INDEX { srmT3LineNum, srmStartT1LineNum } ::= ...
- srmStartT1LineNum
- The start T1 number to be affected. There is no default value for this object.
- srmT1RowStatus
- a command is used to add, delete, or modify one or more DS1 mapping. Default value is delete.
- srmTargetSlotNum
- specify the target slot number to be linked. There is no default value for this object. For MGX8850: SRM01 services slots 1 - 6 and 9 - 14, SRM02 services slots 17 - 22 and 25 - 30 For MGX8220: SYNTAX Integer32 (5 ..14) ::= { srm3T3CnfGrpEntry 4 } SYN ...
- srmeCnfGrpTable
- The SRME configuration table for bulk distribution of SRME lines.
- srmeCnfGrpEntry
- an entry in the SRME Distribution configuration table
- srmeLineNum
- This object identifies the SRME line number. For OC3/STM1: SYNTAX Integer32 1 There is no default value for this object.
- srmeStartVtNum
- The start T1 or E1 number (virtual tributary) to be affected. For OC3 with T1 tributaries: SYNTAX Integer32 (1 .. 84) For STM1 with E1 tributaries: SYNTAX Integer32 (1 .. 63) There is no default value for this object.
- srmeRowStatus
- Command used to add, delete, or modify one or more T1 or E1 mappings. Only the srmeVtFramingType object can be modified once the distribution link is added. To modify all other objects, user should first delete the link and add it again. Default value is ...
- srmeTargetSlotNum
- This object specifies the target slot number to be linked. There is no default value for this object. For MGX8x50: SRM01 services slots 1 - 6 and 9 - 14, SRM02 services slots 17 - 22 and 25 - 30 For MGX8x30: service slots 3-6 and 10-13.
- srmeTargetSlotLineNum
- Specify the target slot's line to be linked. The value zero means, the target line number is not assigned. There is no default value for this object.
- srmeVtFramingType
- Specifies the Framing Type of the target slot line. This is applicable only if the target module is a T1 Service Module and byte sync mapping is used on SRME. Not applicable to E1 Service Modules. sf: Superframe or D4 esf: Extended Superframe. Default is ...
- ciscoWanSrmConfGroup
- The collection of objects which are used for configuring bulk distribution for SRM module.
- ciscoWanSrmeConfGroup
- The collection of objects which are used for configuring bulk distribution for SRM-E module.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
