CISCO-POWER-ETHERNET-EXT-MIB Download

cpeExtDefaultAllocation

This object indicates the default inline power allocation per port. This is a global configuration parameter that applies to all inline power capable ports in the system. The system must consider this object as well as the per port configuration object, c ...

cpeExtPsePortTable

This table extends the POWER-ETHERNET-MIB pethPsePortTable for power Ethernet ports on a Powered Sourcing Equipment (PSE) device.

cpeExtPsePortEntry

A cpeExtPsePortEntry extends a corresponding pethPsePortTable entry. This entry displays and controls more characteristics of a power Ethernet port on a PSE device.

cpeExtPsePortEnable

This object is an extension of the pethPsePortAdminEnable object from RFC3621. It allows the user to be more specific when enabling the PSE functions. The states, 'auto', 'static' and 'limit' correspond to a value of 'true' for the pethPsePortAdminEnable ...

cpeExtPsePortDiscoverMode

This object indicates the discover mode used by the system to discover the PD. A value of 'unknown' indicates that the discover mode on the interface is unknown. A value of 'off' indicates that discovery is disabled on the interface. A value of 'ieee' ind ...

cpeExtPsePortDeviceDetected

This object indicates if a Powered Device (PD) has been detected on the interface. A value of 'true' indicates that a PD has been detected on the interface. A value of 'false' indicates that no PD has been detected on the interface.

cpeExtPsePortIeeePd

This object indicates whether the Powered Device attached to the interface is an IEEE compliant Powered Device or not. A value of 'true' indicates the attached Powered Device is an IEEE compliant Powered Device. A value of 'false' indicates the attached P ...

cpeExtPsePortAdditionalStatus

This object is an extension of the pethPsePortDetectionStatus object from RFC3621 and provides additional status information. deny: When set, the PD attached to the interface is being denied power due to insufficient power resources on the Power Sourcing ...

cpeExtPsePortPwrMax

This indicates the maximum amount of power that the PSE will make available to the PD connected to this interface.

cpeExtPsePortPwrAllocated

This object indicates the amount of power allocated from the PSE for the PD.

cpeExtPsePortPwrAvailable

This object indicates the amount of power available for the PD to use. This value may differ from the value cpeExtPsePortPwrAllocated due to the efficiency issues of delivering the power from the PSE to the PD. When sufficient power is available to power ...

cpeExtPsePortPwrConsumption

This indicates the actual power consumption of the PD connected to this interface. It may not necessarily be equal to the value of cpeExtPsePortPwrAvailable.

cpeExtPsePortMaxPwrDrawn

This indicates the maximum amount of power drawn by the PD connected to this interface, since it was powered on.

cpeExtPsePortEntPhyIndex

The entPhysicalIndex value that uniquely identifies the PSE port. If the PSE port does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the management system, this object has the value of zero.

cpeExtPsePortPolicingCapable

This object indicates whether the PSE port hardware is capable of policing the port for proper power consumption based on the allocated value.

cpeExtPsePortPolicingEnable

This object allows the user to turn on or turn off the power policing of the PSE port. If the instance value of cpeExtPsePortPolicingCapable is 'TRUE', the user is allowed to set this object to 'on' or 'off'. Otherwise, this object is read-only and always ...

cpeExtPsePortPolicingAction

This object specifies the power policing action that the device will take on this PSE port when the real-time power consumption exceeds its max power allocation if the value of cpeExtPsePortPolicingEnable is 'on'. 'deny' - the device will deny th ...

cpeExtPsePortPwrManAlloc

This object specifies the manual power allocation that the PSE will allocate to the PD connected to this interface regardless of the amount requested via CDP or IEEE. Setting this object value to zero disables the manual power allocation. Warning: Misconf ...

cpeExtMainPseTable

This table contains the additional information for the main PSE group in pethMainPseTable.

cpeExtMainPseEntry

A cpeExtMainPseEntry contains information about a particular pethMainPseGroupIndex. An entry is created by the agent when a main PSE group is added to the pethMainPseTable. An entry is deleted by the agent when a main PSE group is removed from the pethMai ...

cpeExtMainPseEntPhyIndex

The entPhysicalIndex value that uniquely identifies the main PSE group. If the main PSE group does not have a corresponding physical entry in entPhysicalTable or if the entPhysicalTable is not supported by the management system, then this object has the v ...

cpeExtMainPseDescr

A textual string containing information about the Power Source Equipment (PSE) group.

cpeExtMainPsePwrMonitorCapable

This object indicates if the given group is capable of monitoring the power consumption of the interfaces that belong to the group. The value 'true' means that the group is capable. The value 'false' means that the group in not capable.

cpeExtPdStatsTotalDevices

This object indicates the total number of the powered devices with any power classifications in the system. Classification is a way to tag different terminals on the Power over LAN network according to their power consumption. Devices such as IP telephone ...

cpeExtPdStatsTable

This table contains the statistics information of the powered devices fallen into different power classifications in the system.

cpeExtPdStatsEntry

A cpeExtPdStatsEntry contains the statistics information about a particular power classification defined in cpeExtPdStatsIndex.

cpeExtPdStatsClass

The power classification as the index for the statistics information for powered devices. A value of 'cisco' indicates that the powered devices are CISCO proprietary and their power classification does not fall into any class in IEEE specifications. A val ...

cpeExtPdStatsDeviceCount

This object indicates the count of the powered devices whose power classification falls into a specific value of cpeExtPdStatsIndex.

cpeExtPolicingNotifEnable

This object is used to enable/disable the the cpeExtPolicingNotif notification.

cpeExtPsePortGroup

This group provides information and configuration objects in addition to those provided in the POWER-ETHERNET-MIB (RFC3621).

cpeExtPsePortGlobalConfigGroup

This is a collection of objects which provide global configuration of the PSE interfaces.

cpeExtPsePortPwrMonitorGroup

This is a collection of objects which provide power monitoring on PD's connected to the PSE interfaces.

cpeExtMainPseGroup

This is a collection of objects which provide additional information for the PSE group.

cpeExtPortEntityIndexGroup

This is a collection of objects which provide entity physical index information for PSE port.

cpeExtPortPolicingGroup

This is a collection of objects which provide the hardware power consumption policing information for PSE port.

cpeExtPdStatsGroup

This is a collection of objects which provide the statistics information for powered devices.

cpeExtMainPseGroup2

This is a collection of objects which provide additional information to identify the PSE group.

cpeExtPseGrpPwrGroup

This is a collection of objects which provide power monitoring information for the PSE group.

cpeExtPortPolicingActionGroup

This is a collection of objects which provide control of the power policing action of the PSE port.

cpeExtPortPwrManAllocGroup

This is a collection of objects which provide manual power allocation for the PSE port.

cpeExtPolicingNotifEnableGroup

A collection of object that provides control over power consumption policing status notification.