CISCO-OPTICAL-PATCH-MIB

CISCO-OPTICAL-PATCH-MIB Download

MIBs list

This MIB module is used to configure and monitor the network element view of optical patches between two ports or fibers on the same network element. It is up to the user to keep the provisioned information that is reflected in this MIB module in sync with the actual patches present between ports or fibers on the network element. Provisioning of a patch does not cause a patch to be inserted; it only informs the network element that a patch has been, or is soon to be, added or removed.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-OPTICAL-PATCH-MIB

cOPatchInterfaceTable
This table lists all interfaces that are provisioned to indicate that they are patched to other interfaces on the same network element. The table is used to find patches that include a particular interface. This table is deprecated since it only includes ...
cOPatchInterfaceEntry
An entry is created only when an interface is provisioned to indicate that it is patched to another interface on the same network element (i.e. when the associated entry in the cOPatchTable has been created). An entry is deleted when the interface is remo ...
cOPatchIdentifier
The value of cOPatchIndex used in the cOPatchTable to identify a patch that includes this interface. The other interface included in that patch has an entry in this table with the same value of this object, in addition to the entry in the cOPatchTable wi ...
cOPatchIndexNext
This object contains an appropriate value to be used for cOPatchIndex when creating entries in the cOPatchTable. The value 0 indicates that no unassigned entries are available. To obtain the cOPatchIndex value for a new entry, the manager issues a manage ...
cOPatchLastChange
The value of sysUpTime at the time of the last creation, deletion or modification of an entry in the cOPatchTable. If the cOPatchTable entries has been unchanged since the last re-initialization of the local network management subsystem, then this object ...
cOPatchEventType
The event type of the patch. The use is as follows: create(1) The value of this object when cOPatchEvent is generated upon creation of a patch. delete(2) The value of this object when cOPatchEvent is generated upon deletion of a patch. modify(3) The valu ...
cOPatchTable
This table contains the network element view of optical patches between two interfaces on the same network element. It is up to the user to keep the provisioned information that is reflected in this table in sync with the actual patches present between in ...
cOPatchEntry
This entry is used to model a unidirectional or bidirectional patch between two interfaces on the same network element. An entry is created when the network element is provisioned to indicate that two interfaces on the network element have been patched to ...
cOPatchIndex
A unique value used to identify this patch. For each interface associated with this patch, the agent reports this patch index value in the cOPatchIntfPatchId object of the corresponding cOPatchIntfTable entries. When the value of this index is equal to t ...
cOPatchLowIfIndex
The value of this object is equal to MIB II's ifIndex value of the interface for this patch. The term low implies that this interface has the numerically lower ifIndex value than the other interface identified in the same cOPatchEntry. The value of this ...
cOPatchHighIfIndex
The value of this object is equal to MIB II's ifIndex value of the interface for this patch. The term high implies that this interface has the numerically higher ifIndex value than the other interface identified in the same cOPatchEntry. The value of thi ...
cOPatchType
The creation type of the patch. The use is as follows: provisioned(1) Provisioned by the user or by a management system using the Command Line Interface, SNMP, or other means of management access to the network element. automatic(2) Created automatically ...
cOPatchStatus
This object indicates the error status of the patch. The use is as follows: noError(1) This value indicates a patch with no error. otherError(2) This value indicates an unknown patch error. interfaceError(3) This value indicates one or both interfaces are ...
cOPatchCreationTime
The value of MIB II's sysUpTime object at the time this patch was created. If the current state was entered prior to the last re-initialization of the agent then this object contains a zero value.
cOPatchRowStatus
The status of this entry in the cOPatchTable. This object is used to create an entry indicating that two interfaces on the network element have been patched together, or to modify or delete an existing entry.
cOPatchDirOnLowIf
In case of an optical interface where the transmitted and received signals travel on two different strands of fiber, it is possible that each fiber is patched to a different interface. This object identifies the patch direction for this entry relative to ...
cOPatchIntfTable
This table lists all interfaces that are provisioned to indicate that they are patched to other interfaces on the same network element. The table is used to find patches that include a particular interface. An interface can be patched to another interfac ...
cOPatchIntfEntry
An entry is created only when an interface is provisioned to indicate that it is patched to another interface on the same network element (i.e. when the associated entry in the cOPatchTable has been created). An entry is deleted when the interface is remo ...
cOPatchIntfDirection
In case of an optical interface where the transmitted and received signals travel on two different strands of fiber, it is possible that each fiber is patched to a different interface. For example, the transmit and receive fibers of this interface may ha ...
cOPatchIntfPatchId
The value of cOPatchIndex used in the cOPatchTable to identify a patch that includes this interface. The other interface included in that patch has an entry in this table with the same value of this object, in addition to the entry in the cOPatchTable wi ...
cOPatchInterfaceGroup
Object needed to implement Interfaces with Patches.
cOPatchGroup
Collection of objects needed to implement Patches.
cOPatchIntfGroup
Object needed to implement Interfaces with Patches.
cOPatchGroup1
Collection of objects needed to implement Patches in transmit, receive or both directions.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list