CISCO-OAM-MIB

CISCO-OAM-MIB Download

MIBs list

A MIB module for invoking OAM loopback Ping on ATM connections.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-OAM-MIB

oamLoopbackPingTable
A table of OAM loopback request entries. (This table is similar to the CISCO-PING-MIB.)
oamLoopbackPingEntry
A OAM loopback request entry. A management station wishing to create an entry should first generate a pseudo-random serial number to be used as the index to this sparse table. The NMS should then create the associated instance of the row status and row o ...
oamLoopbackPingSerialNumber
Object which identifies a unique entry in the oamLoopbackPingTable. A management station wishing to initiate a OAM-loopback operation should use a pseudo-random value for this object when creating or modifying an instance of an oamLoopbackPingEntry. The ...
oamLoopbackPingInterface
The interface of the connection on which OAM loopbacks are to be sent. Once an instance of this object is created, its value can not be changed. The value specified for this object must equate to a value of ifIndex in the ifTable.
oamLoopbackPingVpi
The VPI of the connection on which OAM loopbacks are to be sent. Once an instance of this object is created, its value can not be changed.
oamLoopbackPingVci
Either -1 or the VCI of the connection on which F5 OAM loopback cells are to be sent. If the value of this object is -1, then an F4 OAM loopback cells will be sent on the VPC indicated by oamLoopbackPingVpi. An instance of this object cannot be created un ...
oamLoopbackPingType
The type of OAM loopback to be performed.
oamLoopbackPingLocation
The value to be placed in the 'Loopback Location ID' field of the OAM loopback cell. If this value is less than 16 octets in length, then it will be appended with zero-valued octets to form the required 96-bit value. One possibility is to set this value ...
oamLoopbackPingLocationFlag
Specifies what kind of information is embedded into the oamLoopbackPingLocation string. This flag is ignored when oamLoopbackPingType is set to segment.
oamLoopbackPingCount
Specifies the number of OAM loopback cells to send to the target in this sequence.
oamLoopbackPingTimeout
Specifies the amount of time to wait for a response to a transmitted OAM loopback cells before declaring the OAM loopback cells as 'dropped.'
oamLoopbackPingDelay
Specifies the minimum amount of time to wait before sending the next OAM loopback cell in a sequence after receiving a response or declaring a timeout for a previous OAM cell. The actual delay may be greater due to internal task scheduling.
oamLoopbackPingTrapOnCompletion
Specifies whether or not a oamLoopbackPingCompletion trap should be issued on completion of the sequence of OAM loopback cells. If such a trap is desired, it is the responsibility of the management entity to ensure that the SNMP administrative model is co ...
oamLoopbackPingSentCells
The number of OAM loopback cells that have been sent to the target in this sequence.
oamLoopbackPingReceivedCells
The number of OAM loopback cells that have been received from the target in this sequence.
oamLoopbackPingMinRtt
The minimum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received.
oamLoopbackPingAvgRtt
The average round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received.
oamLoopbackPingMaxRtt
The maximum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received.
oamLoopbackPingCompleted
Set to true when all the OAM loopback cells in this sequence have been either responded to or timed out.
oamLoopbackPingEntryOwner
The entity that configured this entry.
oamLoopbackPingEntryStatus
The status of this table entry. Once the entry status is set to active, the associate entry cannot be modified until the sequence completes (oamLoopbackPingCompleted is true).
oamLoopbackPingDir
This object set the traveling direction of the OAM segment loopback cells which are injected to the connection endpoint.
oamLoopbackPingOperStatus
This object indicates the ping test status.
oamLoopbackPingExecTime
The value of sysUpTime when the MIB object is created which triggers the loppback ping test.
oamLoopbackPingMinRttuSec
The minimum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received. Notes: this object is the same as oamLoopbackPingMinRtt but th ...
oamLoopbackPingAvgRttuSec
The average round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received. Notes: this object is the same as oamLoopbackPingAvgRtt but th ...
oamLoopbackPingMaxRttuSec
The maximum round trip time of all the OAM loopback cells that have been sent in this sequence. This object will not be created until the first OAM loopback response in a sequence is received. Notes: this object is the same as oamLoopbackPingMaxRtt but th ...
oamLoopbackSegEndPointTable
This table contains a list of OAM loopback segment endpoints. When the endpoint is an OAM segment endpoint, it is able to send ATM segment loop back cells or loop back the cells to the originator which initiates the OAM loop back ping test. The provisioni ...
oamLoopbackSegEndPointEntry
An entry in the segment endpoint table.
oamLoopSegVpi
The VPI value of a VP or VC connection.
oamLoopSegVci
The VCI value of VC connection. For a VPC connection, the VCI value is 0.
oamLoopSegRowStatus
To create, delete an OAM segment entry. Only the value 'active', 'createAndGo', and 'destroy' are supported. If the connection endpoint does not exist, the entry could not be created. If the associated ATM connection is de-routed or deleted, the connectio ...
ciscoOamPingMIBGroup
A collection of objects providing the ability to invoke the sending of OAM loopback cells.
ciscoOamPing2MIBGroup
A collection of objects providing the ability to invoke the sending of OAM loopback cells.
ciscoOamPingSegEndPointGroup
A collection of objects providing the ability to provision ATM connection endpoints to be OAM segment loopback endpoint.
ciscoOamPingMIBGroupRev3
A collection of objects providing the ability to invoke the sending of OAM loopback cells.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list