CISCO-LWAPP-LINKTEST-MIB

CISCO-LWAPP-LINKTEST-MIB Download

MIBs list

This MIB is intended to be implemented on all those devices operating as Central controllers, that terminate the Light Weight Access Point Protocol tunnel from Cisco Light-weight LWAPP Access Points. Link Test is performed to learn the radio link quality between AP and Client. CCX linktest is performed for CCX clients. With CCX linktest radio link can be measured in both direction i.e. AP->Client(downLink) and Client->AP(uplink). When client does not support CCX or CCX linktest fails,ping is done between AP and Client. In ping test, only uplink (client->AP) quality can be measured.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-LWAPP-LINKTEST-MIB

cLLtResponder
This object is used to control the AP's response to the linktests initiated by the client. When set to 'true', the AP is expected to respond to the linktests performed by the client. The AP won't respond to the linktests initiated by the client, when this ...
cLLtPacketSize
This object indicates the number of bytes to be sent by the AP to the client in one linktest packet.
cLLtNumberOfPackets
This object indicates the number of linktest packets sent by the AP to the client.
cLLtTestPurgeTime
This object indicates the duration for which the results of a particular run of linktest is available in cLLtClientLtResultsTable from the time of completion of that run of linktest. At the expiry of this time after the completion of the linktest, the en ...
cLLtClientLinkTestTable
This table is used to initiate linktests between an AP and one of its associated clients. CCX linktests are done on clients that support CCX. For all non-CCX clients, ping test is done. Note that ping test is also done when the CCX linktests fail. With ...
cLLtClientLinkTestEntry
Each entry in this table represents one instance of the linktest initiated by the user through a network manager.
cLLtClientLtIndex
This object uniquely identifies one particular run of the linktest initiated between the client identified by cLLtClientLtMacAddress and the AP it is currently associated with.
cLLtClientLtMacAddress
This object represents the mac address of the client involved in the particular run of linktest. This object must be set to a valid value when setting cLLtClientRowStatus to 'createAndGo' to initiate a run of linktest.
cLLtClientLtRowStatus
This object is the status column used for creating and deleting instances of the columnar objects in this table.
cLLtClientLTResultsTable
This table populates the results of the linktests initiated by the user through the cLLtClientLinkTestTable. This table has a sparse dependent relationship with cLLtClientLinkTestTable. There exists a row in this table corresponding to the row for each r ...
cLLtClientLTResultsEntry
Each entry in this table represents the results of the linktest identified by cLLtClientLtIndex.
cLLtClientLtPacketsSent
The number of packets sent to the target client specified by cLLtClientLtMacAddress by the AP it is associated to.
cLLtClientLtPacketsRx
The number of packets sent by the client specified by cLLtClientLtMacAddress to the AP it is associated to.
cLLtClientLtTotalPacketsLost
The total number of packets lost during the linktest in both the upstream and downstream directions.
cLLtClientLtApToClientPktsLost
The number of packets lost during the linktest in the downstream (direction of traffic from AP to client) direction.
cLLtClientLtClientToApPktsLost
The number of packets lost during the linktest in the upstream (direction of traffic from client to AP) direction.
cLLtClientLtMinRoundTripTime
The minimum round trip time observed on the linktest packet between the AP and the client.
cLLtClientLtMaxRoundTripTime
The maximum round trip time observed on the linktest packet between the AP and the client.
cLLtClientLtAvgRoundTripTime
The average round trip time observed on the linktest packet between the AP and the client.
cLLtClientLtUplinkMinRSSI
The minimum RSSI value as observed at the AP.
cLLtClientLtUplinkMaxRSSI
The maximum RSSI value as observed at the AP.
cLLtClientLtUplinkAvgRSSI
The average RSSI value as observed at the AP.
cLLtClientLtDownlinkMinRSSI
The minimum RSSI value as observed at the client.
cLLtClientLtDownlinkMaxRSSI
The maximum RSSI value as observed at the client.
cLLtClientLtDownlinkAvgRSSI
The average RSSI value as observed at the client.
cLLtClientLtUplinkMinSNR
The minimum SNR value as observed at the AP.
cLLtClientLtUplinkMaxSNR
The maximum SNR value as observed at the AP.
cLLtClientLtUplinkAvgSNR
The average SNR value as observed at the AP.
cLLtClientLtDownlinkMinSNR
The minimum SNR value as observed at the client.
cLLtClientLtDownlinkMaxSNR
The maximum SNR value as observed at the client.
cLLtClientLtDownlinkAvgSNR
The average SNR value as observed at the client.
cLLtClientLtTotalTxRetriesAP
The total number of linktest packet transmission retries as observed at the AP.
cLLtClientLtMaxTxRetriesAP
The maximum number of linktest packet transmission retries observed at the AP.
cLLtClientLtTotalTxRetriesClient
The total number of linktest packet transmission retries at the client.
cLLtClientLtMaxTxRetriesClient
The maximum number of linktest packet transmission retries observed at the client.
cLLtClientLtStatus
This object indicates the status of the linktest this particular entry corresponds to. The semantics as follows. 'cLLtClientLtStatusFailed' - This value indicates that this particular linktest has failed. 'cLLtClientLtCcxStatusInProgress' - This value ind ...
cLLtClientLtDataRateTable
This table provides the results of CCX Link tests classified on different data rates between AP and clients. A row is added to this table automatically by the agent corresponding to one linktest identified by cLLtClientLtIndex and deleted when the corresp ...
cLLtClientLtDataRateEntry
Each entry represents a conceptual row and populates the number of packets sent in the linktest identified by cLLtClientLtIndex. The statistics of the linktest are classified based on the respective data rates identified by cLLtClientLtDataRate.
cLLtClientLtDataRate
This object identifies the rate at which packets are transmitted. The rates are defined in Mbps with the following being the possible values. Rates - 1,2,5.5,6,9,11,12,18,24,36,48,54,108.
cLLtClientLtRateDownlinkPktsSent
The number of packets sent by the AP at the rate identified by cLLtClientLtDataRate.
cLLtClientLtRateUplinkPktsSent
The number of packets sent by the client at the rate identified by cLLtClientLtDataRate.
cLLinkTestConfigGroup
This collection of objects represent the linktest parameters for use during the various of the tests.
cLLinkTestRunsGroup
This collection of objects is used to initiate linktests and retrieve the results of the respective runs of the tests.
cLLinkTestStatusGroup
This collection of objects provide information about the linktest results.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list