CISCO-IP-RAN-BACKHAUL-MIB

CISCO-IP-RAN-BACKHAUL-MIB Download

MIBs list

This MIB provides information on the IP-RAN traffic from cell site to aggregation site in the following situations. In an GSM environment the cell site will be the Base station Transceiver System(BTS) and the aggregation site will be the Base Station Controller(BSC). In the UMTS environment the cell site will be the B-Node and the aggregation site will Radio Network Controller(RNC).

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-IP-RAN-BACKHAUL-MIB

cirbhSnmpTrafficMode
This object describes the mode of SNMP traffic for this device in relationship to connectivity to network management station. This will be used to define default behavior for the device based on the on available bandwidth for management. 'undefined' : Tra ...
cirbhLocation
This object provides information on location of the device to aid in topology display. 'undefined' : not defined. 'aggSite' : Located at Base Station Controller or or Radio Network Controller site. 'cellSite' : Located at Base Station Transceiver Syste ...
cirbhBackHaulStatsInterval
The length of the interval used to collect statistics in the cirbhBackHaulStatsTable.
cirbhBackHaulStatsEntries
The maximum number of entries in the cirbhBackHaulStatsTable table.
cirbhBackHaulAcceptableThreshold
This object is used to specify a level of traffic below which the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects are marked as 'acceptable'. All changes to this threshold will take effect at the end of the current inter ...
cirbhBackHaulWarningThreshold
This object is used to specify a level of traffic were the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects are marked as 'warning'. All changes to this threshold will take effect at the end of the current interval. The ...
cirbhBackHaulOverloadedThreshold
This object is used to specify a level of traffic were the instances of the cirbhBackHaulRcvdUtilState and cirbhBackHaulSentUtilState objects are marked as 'overloaded'. Changes to this threshold will take effect at the end of the current interval. The va ...
cirbhBackHaulUtilInterval
The length of the interval used to suppress generation of the ciscoIpRanBackHaulRcvdUtil and ciscoIpRanBackHaulSentUtil notifications. Notification will not be suppressed when zero value is specified.
cirbhInfoTable
This table provides information on interface used to establish shorthaul connection to BTS or BSC or node B site.
cirbhInfoTableEntry
Each entry describes the information used to route GSM and UMTS packets across backhaul for a single GSM or UMTS link.
cirbhInfoProtocol
Protocol used to indicate type of shorthaul.
cirbhInfoLocalAddrType
The type of address specified in the corresponding instance of cirbhConfigLocalIpAddr object.
cirbhInfoLocalAddr
The local address used to route traffic across backhaul.
cirbhInfoLocalPortNumber
The local port number used to distinguish traffic from this interface when transported over backhaul connection.
cirbhInfoRemoteAddrType
The type of address in the in the corresponding instance of the cirbhInfoRemoteAddr object.
cirbhInfoRemoteAddr
The remote IP address used to route traffic across backhaul.
cirbhInfoRemotePortNumber
The remote port number used to distinguish traffic from this interface when transported over backhaul connection.
cirbhInfoAdjectSerialNum
This object provides the serial number of the adjacent device supporting the other side of this shorthaul. This object contains the same value as the corresponding entPhysicalSerialNum object on the adjacent device. The type of object like chassis or mod ...
cirbhInfoAdjectVendorType
This object provides the vendor type of the adjacent device supporting other end of this shorthaul. This objectcontains the same value as the corresponding entPhysicalVendorType object on the adjacent device.
cirbhInfoBackhaulRxIfIndex
This object provides the ifIndex of the interface used to receive traffic from destination.
cirbhInfoBackhaulTxIfIndex
This object provides the ifIndex of the interface used to sent traffic to destination.
cirbhInfoShBulkLastIndex
The latest value of the cirbhShortHaulBulkHistory object from the cirbhShortHaulBulkHistory table.
cirbhInfoOptimizeTraffic
This object indicate whether the traffic received and sent for this shorthaul interface is optimized.
cirbhGsmAlarmTable
This table provides alarm information for GSM-Abis interfaces.
cirbhGsmAlarmTableEntry
Each entry represents the set of alarms that apply to GSM interface.
cirbhGsmAlarmConnectState
The state of the connection for GSM interface.
cirbhGsmAlarmLocalState
The local alarm state.
cirbhGsmAlarmRemoteState
The remote alarm state.
cirbhGsmAlarmRedundancyState
The redundancy state of the interface
cirbhUmtsConnectionTable
This table provides information associated with UMTS connection between BTS and BSC.
cirbhUmtsConnectionTableEntry
Each Entry represents the set of alarms that apply to UMTS interfaces.
cirbhUmtsConnectionState
The state of the connection between the UMTS interfaces.
cirbhUmtsConnectionRedundState
The redundancy state of the interface.
cirbhUmtsConnectionRootIfIndex
The root interface used to transport and receive UMTS traffic as follows. ATM: ATM0/0.0-aal5 layer -> ATM0/0-atm layer. IMA ATM0/IMA0.1-aal5 layer -> ATM0/IMA0
cirbhUmtsAlarmTable
This table provides information on alarm states for UMTS-ATM interfaces.
cirbhUmtsAlarmTableEntry
Each entry provides information about the alarms for each ATM interface used to configure the shorthaul UMTS interface.
cirbhUmtsAlarmRxLocalState
The local receive alarm state.
cirbhUmtsAlarmRxRemoteState
The remote receive alarm state.
cirbhUmtsAlarmTxLocalState
The local transmit alarm state.
cirbhUmtsAlarmTxRemoteState
The remote transmit alarm state.
cirbhStatsTable
This table provides measurements on bytes and packets sent or received on a per interface basis. It is important to note that this table shares the same index with the cirbhInfoTable table the ifIndex can be used to associate information from both tables.
cirbhStatsTableEntry
This entry provides measurements on shorthaul interfaces to allow compression efficency to be calculated.
cirbhStatsRcvdSamples
For GSM-Abis interfaces, the count of samples received on interface. For UMTS interfaces, the number of packets received on interface.
cirbhStatsSentSamples
For GSM-Abis interfaces, the count of samples sent on interface. For UMTS interfaces, the number of packets sent on this interface.
cirbhStatsRcvdBackHaulPackets
The count of packets received from backhaul that contained data for this interface.
cirbhStatsSentBackHaulPackets
The count of packets transmitted on backhaul that contained data from this interface.
cirbhStatsRcvdBackHaulBytes
The count of bytes received from backhaul that contained data for this interface.
cirbhStatsSentBackHaulBytes
The count of bytes transmitted on backhaul that contained data from this interface.
cirbhErrorsTable
This table provides information on the errors that can be encountered during the compression and decompression of UMTS and GSM-Abis traffic. UMTS ------------------- | GSM Links -------- --------------| | IP based Multi-link(backhaul) ------------ ...
cirbhErrorsTableEntry
Each entry provides account of various types of errors encountered on GSM and UMTS interfaces.
cirbhErrorsBhPeerNotReadyDrops
The count of packets dropped on backhaul because peer was not ready.
cirbhErrorsBhPeerNotActiveDrops
The count of packets dropped on backhaul because peer was reachable but not in active state.
cirbhErrorsBhInvalidPackets
The number of backhaul packets that were received and dropped because they contained invalid information.
cirbhErrorsBhLostRcvdPackets
The number of backhaul packets expected to be received but never arrived.
cirbhErrorsBhLostSentPackets
The number of backhaul packets sent but never were received by peer.
cirbhErrorsBhMissedPackets
The value of this object is the sum total of the values of the corresponding instances of the following objects: cirbhErrorsBhMissedLatePackets cirbhErrorsBhMissedLostPackets cirbhErrorsBhMissedNoMemPackets cirbhErrorsBhMissedResetPackets
cirbhErrorsBhMissedLatePackets
The number of packets missed on backhaul because they arrived past the allowed time frame.
cirbhErrorsBhMissedLostPackets
The number of packets missed on backhaul because they were lost on backhaul.
cirbhErrorsBhMissedNoMemPackets
The number of packets missed on backhaul for lack of available memory to allocate packet.
cirbhErrorsBhMissedResetPackets
The number of packets missed on backhaul because the of a reset event.
cirbhErrorsDecompFailures
The number of times information contained in packet could not be decompressed.
cirbhErrorsCompFailures
The number of times the information contained in the packet could not be compressed. This counter is incremented for all types of compression errors.
cirbhErrorsCompNoPacketFailures
The number of times compression failed because packet was unavailable.
cirbhErrorsCompNoIntFailures
The number of times compression failed because route to peer was not available.
cirbhErrorsCompIntDownFailures
The number of times compression failed because interface was down.
cirbhErrorsCompEncapFailures
The number of times compression failed because of encapsulation errors.
cirbhErrorsCompQosDrops
The number of times compression failed because of quality of service errors or traffic load.
cirbhShortHaulHistoryTable
This table provides historical information on the amount of backhaul traffic contributed by each interface.
cirbhShortHaulHistoryTableEntry
Each entry represents the average traffic for last second. Each entry provides information on traffic rates for raw and compressed data.
cirbhShortHaulHistory
An index used to access history of cirbhShortHaulHistoryTable objects.
cirbhShortHaulRcvdRate
The rate of traffic received from this interface to be sent on backhaul prior to compression.
cirbhShortHaulSentRate
The rate of traffic sent out from this interface after traffic was decompressed.
cirbhShortHaulRcvdCompressRate
The rate of traffic received into this interface to be sent on backhaul after compression.
cirbhShortHaulSentCompressRate
The rate of traffic received from backhaul and prior to decompression.
cirbhShortHaulTimeStamp
Time when sample was collected.
cirbhShortHaulRcvdUtilization
Amount of traffic that was receive from backhaul before decompression express as load on E1 or T1.
cirbhShortHaulSentUtilization
Amount of traffic that was send on after compression express as load on E1 or T1.
cirbhCongestionTable
This table provides information on congestion mechanism for shorthaul interfaces.
cirbhCongestionTableEntry
Each entry represents single shorthaul interface.
cirbhCongestionEnabled
This object indicates congestion mechanisms have been enabled for shorthaul interface.
cirbhCongestionDrops
This object provide the number packets or cells that were dropped due to congestion. When the cirbhInfoProtocol is 'gsmAbis' object indicates the number of packets dropped. When the cirbhInfoProtocol is 'umtsIub' object indicates the number of cells dro ...
cirbhCongestionDroppedBytes
The number of bytes dropped due to congestion control mechanisms.
cirbhCongestionEvents
The number of times congestion mechanism was engaged.
cirbhCongestionActive
This object indicates whether congestion mechanism is active.
cirbhCongestionDuration
This object provides number of seconds interface was congested.
cirbhGsmErrorsTable
This table provides information on the errors that can be encountered during the compression and decompression of GSM-Abis traffic.
cirbhGsmErrorsTableEntry
Each entry represents single shorthaul interface.
cirbhGsmErrorsPeerNotReadyDrops
The count of packets dropped on backhaul because peer was not ready.
cirbhGsmErrorsPeerNotActiveDrops
The count of packets dropped on backhaul because peer was reachable but not in active state.
cirbhGsmErrorsInvalidPackets
The number of backhaul packets that were received and dropped because they contained invalid information.
cirbhGsmErrorsLostRcvdPackets
The number of backhaul packets expected to be received but never arrived.
cirbhGsmErrorsLostSentPackets
The number of backhaul packets sent but never were received by peer.
cirbhGsmErrorsMissedPackets
The value of this object is the sum total of the values of the corresponding instances of the following objects: cirbhGsmErrorsMissedLatePackets cirbhGsmErrorsMissedLostPackets cirbhGsmErrorsMissedNoMemPackets cirbhGsmErrorsMissedResetPackets
cirbhGsmErrorsMissedLatePackets
The number of packets missed on backhaul because they arrived past the allowed time frame.
cirbhGsmErrorsMissedLostPackets
The number of packets missed on backhaul because they were lost on backhaul.
cirbhGsmErrorsMissedNoMemPackets
The number of packets missed on backhaul for lack of available memory to allocate packet.
cirbhGsmErrorsMissedResetPackets
The number of packets missed on backhaul because the of a reset event.
cirbhGsmErrorsDecompFailures
The number of times information contained in packet could not be decompressed.
cirbhGsmErrorsCompFailures
The number of times the information contained in the packet could not be compressed.
cirbhGsmErrorsCompNoPacketFailures
The number of times compression failed because packet was unavailable.
cirbhGsmErrorsCompNoIntFailures
The number of times compression failed because route to peer was not available.
cirbhGsmErrorsCompIntDownFailures
The number of times compression failed because interface was down.
cirbhGsmErrorsCompEncapFailures
The number of times compression failed because of encapsulation errors.
cirbhGsmErrorsCompQosDrops
The number of times compression failed because of quality of service errors or traffic load.
cirbhGsmErrorsFastSendFailures
Fast send failures.
cirbhGsmErrorsTxPacketFailures
Unable to transmit GSM packet.
cirbhGsmErrorsTxNoBuffers
Unable to allocate buffer for transmission.
cirbhGsmErrorsTxResets
Transmission interface resets.
cirbhGsmErrorsOverruns
Packet was missed because backhaul jitter buffer was ran out of available space.
cirbhGsmErrorsInterruptFailures
Packet was lost because of interrupt failure.
cirbhGsmErrorsLateArrivals
Count of GSM packets that arrived later than the allowed time.
cirbhGsmErrorsEarlyArrivals
Count of GSM packets that arrived earlier than the allowed time.
cirbhUmtsErrorsTable
This table provides information on the errors that can be encountered during the compression and decompression of UMTS-Iub traffic.
cirbhUmtsErrorsTableEntry
Each entry represents single shorthaul interface.
cirbhUmtsErrorsPeerNotReadyDrops
The count of packets dropped on backhaul because peer was not ready.
cirbhUmtsErrorsInvalidPackets
The number of backhaul packets that were received and dropped because they contained invalid information.
cirbhUmtsErrorsDecompFailures
The number of times information contained in packet could not be decompressed.
cirbhUmtsErrorsCompFailures
The number of times the information contained int the packet could not be compressed.
cirbhUmtsErrorsCompNoPacketFailures
The number of times compression failed because packet was unavailable.
cirbhUmtsErrorsCompNoIntFailures
The number of times compression failed because route to peer was not available.
cirbhUmtsErrorsCompIntDownFailures
The number of times compression failed because interface was down.
cirbhUmtsErrorsCompEncapFailures
The number of times compression failed because of encapsulation errors.
cirbhUmtsErrorsCompQosDrops
The number of times compression failed because of quality of service errors or traffic load.
cirbhUmtsErrorsShorthaulPakFailures
Unable to allocate packet used to send data on shorthaul interface.
cirbhUmtsErrorsUmtsEncapFailures
The UMTS encapsulate failures.
cirbhUmtsErrorsLocalPvcDrops
Packet dropped because local PVC was unavailable.
cirbhUmtsErrorsRemotePvcDrops
Packet dropped because remote PVC was unavailable.
cirbhUmtsErrorsBackhaulDrops
Packets dropped on backhaul.
cirbhShortHaulBulkTable
This table provides historical information on the amount of backhaul traffic contributed by each interface.
cirbhShortHaulBulkTableEntry
Each entry represents the average traffic for last second. Each entry provides information on traffic rates for raw and compressed data.
cirbhShortHaulBulkHistory
An index used to access history of cirbhShortHaulBulkDataTable objects.
cirbhShortHaulBulkTimeStamp
Time when sample was collected.
cirbhShortHaulBulkBaseUnit
The Base Unit is an integer used to provide a range of bytes rates provided in the cirbhShortHaulBulkUtil object. All values in the cirbhShortHaulBulkUtil object share the same base unit.
cirbhShortHaulBulkUtil
This object provides the amount of traffic transmitted in a particular shorthaul. The object contains 1 to 128 pairs. The length of the octet string can be used to calculate number of pairs. The information is in the following format were each rate is ...
cirbhBackHaulTable
This table provides information on backHaul links.
cirbhBackHaulEntry
Each entry represents a backhaul link between BSC and a particular BTS site.
cirbhBackHaulAdjectSerialNum
This object provides the serial number of the adjacent device supporting the backhaul connection. This object contains the same value as the corresponding entPhysicalSerialNum object. The type of object like chassis or module is provided by the cirbhBackH ...
cirbhBackHaulAdjectVendorType
This object provides the vendor type of the adjacent device supporting backhaul connection. This object contains the same value as the corresponding entPhysicalVendorType object.
cirbhBackHaulRcvdUtilState
The utilization state for traffic received on backhaul multilink. The following objects will be used to calculate link utilization state: cirbhBackHaulAcceptableThreshold cirbhBackHaulWarningThreshold cirbhBackHaulOverloadedThreshold
cirbhBackHaulSentUtilState
The utilization state for traffic transmitted on backhaul multilink. The following objects will be used to calculate link utilization state: cirbhBackHaulAcceptableThreshold cirbhBackHaulWarningThreshold cirbhBackHaulOverloadedThreshold
cirbhBackHaulRcvdUtil
The average receive utilization of the link over the last second.
cirbhBackHaulSentUtil
The average transmit utilization of the link over the last second.
cirbhBackHaulShortHaulTable
This table lists the associations between shorthaul and backhaul interfaces.
cirbhBackHaulShortHaulEntry
An entry indicates a single association between a backhaul and shorthaul interface.
cirbhBackHaulShortHaulBhIndex
This object indicates the backhaul interface.
cirbhBackHaulShortHaulShIndex
This object indicates the shorthaul interface.
cirbhBackHaulShortHaulTimestamp
This object indicates the value of sysUpTime when the entry was created.
cirbhBackHaulHistoryTable
This table provides historical information on traffic distribution on backhaul interface.
cirbhBackHaulHistoryEntry
Each entry provides information on the utilization of backhaul interface. The utilization is broken down by protocol and by direction. An entry is updated in this table every second.
cirbhBackHaulHistoryIndex
An index used to access history of cirbhBackHaulHistoryTable objects.
cirbhBackHaulHistoryRcvdUtil
The average receive utilization of link over the last second.
cirbhBackHaulHistorySentUtil
The average transmit utilization of link over the last second.
cirbhBackHaulHistoryRcvdAbisUtil
The average receive utilization of link over the last second that consisted of GSM-Abis traffic.
cirbhBackHaulHistorySentAbisUtil
The average transmit utilization of link over the last second that consisted of GSM-Abis traffic.
cirbhBackHaulHistoryRcvdUmtsUtil
The average receive utilization of link over the last second that consisted of UMTS traffic.
cirbhBackHaulHistorySentUmtsUtil
The average transmit utilization of link over the last second that consisted of UMTS traffic.
cirbhBackHaulHistoryTimeStamp
Time when sample was collected.
cirbhBackHaulStatsTable
This table provides current information on the utilization of backhaul interface. One second load samples are collected and the corresponding entry is incremented. The provides a distribution of the traffic load. At the end of an interval the information ...
cirbhBackHaulStatsEntry
Each entry contains the distribution of traffic in the current window specified by the cirbhBackHaulStatsInterval object.
cirbhStatsDirection
The direction of traffic on backhaul.
cirbhStatsTrafficType
The type of traffic.
cirbhStats000to009Seconds
The total numbers of seconds during which the backhaul link was utilized from 0 to 9 percent.
cirbhStats010to019Seconds
The total numbers of seconds during which the backhaul link was utilized from 10 to 19 percent.
cirbhStats020to029Seconds
The total numbers of seconds during which the backhaul link was utilized from 20 to 29 percent.
cirbhStats030to039Seconds
The total numbers of seconds during which the backhaul link was utilized from 30 to 39 percent.
cirbhStats040to049Seconds
The total numbers of seconds during which the backhaul link was utilized from 40 to 49 percent.
cirbhStats050to059Seconds
The total numbers of seconds during which the backhaul link was utilized from 50 to 59 percent.
cirbhStats060to069Seconds
The total numbers of seconds during which the backhaul link was utilized from 60 to 69 percent.
cirbhStats070to079Seconds
The total numbers of seconds during which the backhaul link was utilized from 70 to 79 percent.
cirbhStats080to089Seconds
The total numbers of seconds during which the backhaul link was utilized from 80 to 89 percent.
cirbhStats090to100Seconds
The total numbers of seconds during which the backhaul link was utilized from 90 to 100 percent.
cirbhStatsTimeStamp
Time when sample was collected.
cirbhStatsMaxUtilization
The maximum utilization encountered within interval.
cirbhStatsMaxTimeStamp
Time when cirbhStatsMaxUtilization was recorded.
cirbhBackHaulStatsHistoryTable
This table provides historical information of distribution of load on backhaul interfaces.
cirbhBackHaulStatsHistoryEntry
Each entry in this table is the data collected from the cirbhBackHaulStatsTable table.
cirbhStatsHistoryIndex
An index used to access each 15 minute entry.
cirbhStatsHistoryDirection
The direction of traffic on backhaul.
cirbhStatsHistoryTrafficType
The type of traffic in backhaul history table.
cirbhStatsHistory000to009Seconds
The total numbers of seconds during which the backhaul link was utilized from 0 to 9 percent.
cirbhStatsHistory010to019Seconds
The total numbers of seconds during which the backhaul link was utilized from 10 to 19 percent.
cirbhStatsHistory020to029Seconds
The total numbers of seconds during which the backhaul link was utilized from 20 to 29 percent.
cirbhStatsHistory030to039Seconds
The total numbers of seconds during which the backhaul link was utilized from 30 to 39 percent.
cirbhStatsHistory040to049Seconds
The total numbers of seconds during which the backhaul link was utilized from 40 to 49 percent.
cirbhStatsHistory050to059Seconds
The total numbers of seconds during which the backhaul link was utilized from 50 to 59 percent.
cirbhStatsHistory060to069Seconds
The total numbers of seconds during which the backhaul link was utilized from 60 to 69 percent.
cirbhStatsHistory070to079Seconds
The total numbers of seconds during which the backhaul link was utilized from 70 to 79 percent.
cirbhStatsHistory080to089Seconds
The total numbers of seconds during which the backhaul link was utilized from 80 to 89 percent.
cirbhStatsHistory090to100Seconds
The total numbers of seconds during which the backhaul link was utilized from 90 to 100 percent.
cirbhStatsHistoryTimeStamp
End time when sample was collected.
cirbhStatsHistoryMaxUtilization
The maximum utilization encountered within interval.
cirbhStatsHistoryMaxTimeStamp
Time when cirbhStatsHistoryMaxUtilization was recorded.
cirbhStatsHistoryAverage
The average utilization over the specified time period.
cirbhGsmAlarmNotifEnabled
This object specifies whether the agent should generate the ciscoIpRanBackHaulGsmAlarm defined in this MIB module. 'true' Indicates that ciscoIpRanBackHaulGsmAlarm notification is to be generated. 'false' Indicates that ciscoIpRanBackHaulGsmAlarm notific ...
cirbhUmtsAlarmNotifEnabled
This object specifies whether the agent should generate the ciscoIpRanBackHaulUmtsAlarm defined in this MIB module. 'true' Indicates that ciscoIpRanBackHaulUmtsAlarm notification is to be generated. 'false' Indicates that ciscoIpRanBackHaulUmtsAlarm noti ...
cirbhUtilNotifEnabled
This object specifies whether the agent should generate the ciscoIpRanBackHaulRcvdUtil or ciscoIpRanBackHaulSentUtil defined in this MIB module. 'true' Indicates that ciscoIpRanBackHaulRcvdUtil and ciscoIpRanBackHaulSentUtil notifications are to be gener ...
ciscoIpRanBackHaulScalarsGroup
Cisco IP RAN Input Scalars Group.
ciscoIpRanBackHaulConfigGroup
Cisco IP RAN Configuration Group.
ciscoIpRanBackHaulStatsGroup
Cisco IP RAN Backhaul Statistics Group.
ciscoIpRanBackHaulAlarmGroup
Cisco IP RAN Alarm Group.
ciscoIpRanBackHaulErrorsGroup
Cisco protocol errors Group.
ciscoIpRanBackHaulHistoryGroup
Cisco IP RAN Utilization History Group.
ciscoIpRanBackHaulShortHaulGroup
Cisco IP RAN Backhaul to Shorthaul Group.
ciscoIpRanBackHaulAlarmGroupSup1
Additional objects for Cisco IP RAN Alarm Group.
ciscoIpRanBackHaulScalarsGroupRev2
Cisco IP RAN Input Scalars Group.
ciscoIpRanBackHaulConfigGroupSup2
Cisco IP RAN Configuration Group Sup2.
ciscoIpRanBackHaulHistoryGroupRev2
Cisco IP RAN Utilization History Group.
ciscoIpRanBackHaulCongestionGroup
Cisco IP RAN congestion object group.
ciscoIpRanBackHaulGsmErrorsGroup
Cisco GSM-Abis protocol errors Group.
ciscoIpRanBackHaulUmtsErrorsGroup
Cisco UMTS-Iub protocol errors Group.
ciscoIpRanBackHaulConfigGroupSup3
Cisco IP RAN Configuration Group for Optimization.
ciscoIpRanBackHaulHistoryGroupRev3
Cisco IP RAN Utilization History Group.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list