CISCO-DYNAMIC-ARP-INSPECTION-MIB Download

cdaiLoggingEnable

This object indicates whether the Dynamic ARP Inspection logging is enabled on the device. If this object is set to 'true', Dynamic ARP Inspection logging is enabled. If this object is set to 'false', Dynamic ARP Inspection logging is disabled.

cdaiAddressValidate

This object specifies address validation criteria used by Dynamic ARP Inspection feature. 'srcMacAddress' indicates that source MAC address in ethernet header is checked against the sender MAC address in ARP packet. When this bit is on, packets with diffe ...

cdaiLogBufferSize

This object specifies the size of the logging buffer.

cdaiLoggingRate

This object specifies the maximum number of logging entries will be logged during the time period denoted by cdaiLoggingInterval object for system message generation purpose. Zero value indicates that entry is placed in the log buffer, but a system messag ...

cdaiLoggingInterval

This object specifies the logging interval for system message generation purpose. Zero value indicates that system message is immediately generated (and the log buffer is always empty). Value of this object and value of cdaiLoggingRate object cannot be ze ...

cdaiLogBufferAction

This objects specifies the action can be taken with respect to logging buffer. 'none' indicates that no operation is performed. This object always return value 'none' when read. 'clear' indicates that all entries in cdaiLoggingBufferTable will be cleared.

cdaiLogBufferTable

A table provides the information of logged ARP flows for system message generation.

cdaiLogBufferEntry

A row instance contains logged ARP flow data for system message generation. Entries in the log are cleared once system messages are generated on their behalf. A special entry will be populated for accounting drops of all flows that result in exceeding the ...

cdaiLogBufferIndex

This object uniquely identifies a logged ARP flow in the buffer.

cdaiLogBufferInterface

This object indicates the interface which sent the logged ARP flow. Zero value indicates the special entry.

cdaiLogBufferVlan

This object indicates the VLAN number which the logged ARP flow belongs to. Zero value indicates the special entry.

cdaiLogBufferSenderMacAddress

This object indicates the sender MAC address of the logged ARP flow. All zeros MAC address value indicates the special entry.

cdaiLogBufferSenderAddressType

This object indicates the sender Internet address type of the logged ARP flow.

cdaiLogBufferSenderIpAddress

This object indicates the sender Internet address of the logged ARP flow. The type of this address is determined by the value of cdaiLogBufferSenderAddressType object. All zeros IP address value indicates the special entry.

cdaiLogBufferReason

This object indicates the reason for logging this ARP flow. 'unknown' indicates unknown reason. 'deny' indicates that this ARP flow is logged because it is denied by Dynamic ARP Inspection feature. 'aclDeny' indicates that this ARP flow is logged because ...

cdaiLogBufferLastUpdate

This object indicates the timestamp when the last packet of this flow was accounted by the system.

cdaiLogBufferPacketsCount

This object indicates the number of packets of this ARP flow was accounted by the system.

cdaiVlanConfigTable

A table provides the mechanism to control Dynamic ARP Inspection per VLAN. When a VLAN is created in a device supporting this table, a corresponding entry of this table will be added.

cdaiVlanConfigEntry

A row instance contains the configuration to enable or disable Dynamic ARP Inspection at each existing VLAN.

cdaiVlanIndex

This object indicates the VLAN number on which Dynamic ARP Inspection feature is configured.

cdaiVlanDynArpInspEnable

This object indicates whether Dynamic ARP Inspection is enabled in this VLAN. If this object is set to 'true', Dynamic ARP Inspection is enabled. If this object is set to 'false', Dynamic ARP Inspection is disabled.

cdaiVlanCfgTable

A table provides the mechanism to control Dynamic ARP Inspection per VLAN. This table is populated for each existing VLAN in the device as well as non-existing VLANs which contains the Dynamic ARP Inspection configuration.

cdaiVlanCfgEntry

A row instance contains the Dynamic ARP inspection configuration for a specific VLAN in the device.

cdaiVlanId

This object indicates the VLAN number.

cdaiVlanDynArpInspAdmin

This object specifies the administrative status of Dynamic ARP Inspection feature in this VLAN. If this object value is 'enable', Dynamic ARP Inspection is enabled. If this object value is 'disable', Dynamic ARP Inspection is disabled.

cdaiVlanDynArpInspOper

This object indicates the operational status of Dynamic ARP Inspection feature in this VLAN. If this object is 'active', Dynamic ARP Inspection is operationally active. If this object is 'inactive', Dynamic ARP Inspection is operationally inactive.

cdaiVlanFilterArpAclName

This object specifies an ARP ACL name that Dynamic ARP Inspection feature uses to check the validity of the bindings information in ARP body. An emptry string indicates that no such ARP ACL is configured for this purpose.

cdaiVlanFilterArpAclStatic

This object specifies whether the ARP ACL denoted by cdaiVlanFilterArpAclName is statically applied by Dynamic ARP Inspection feature. This object does not take effect if value of cdaiVlanFilterArpAclName on the row is an empty string. 'true' indicates th ...

cdaiVlanAclLogging

This object specifies the logging configuration that Dynamic ARP Inspection feature applies to ARP packets when they are classified by the configured ACL. 'none' indicates that no logging is performed when packets are classified by the configured ACL. 'ac ...

cdaiVlanDhcpBindingLogging

This object specifies packet logging configuration performed by Dynamic ARP Inspection feature when ARP packets is compared against DHCP bindings information. 'none' indicates that no packet logging is performed. 'permit' indicates that packet logging is ...

cdaiVlanArpProbeLogging

The objects specifies if ARP-Probe packets will be logged by Dynamic ARP Inspection feature. 'true' indicates ARP-Probe packets will be logged. 'false' indicates ARP-Probe packets will not be logged.

cdaiVlanCfgStorageType

The objects specifies the storage type for this conceptual row.

cdaiVlanCfgRowStatus

The status of this conceptual row entry. This object is used to manage creation and deletion of rows in this table. Deletion of an entry in this table is only allowed if the VLAN indicated by its row index object does not exist in the device. Writable obj ...

cdaiIfConfigTable

A table provides the mechanism to configure the trust state for Dynamic ARP Inspection purpose at each physical interface capable of this feature. Some of the interfaces (but not limited to) for which this feature might be applicable are: ifType = etherne ...

cdaiIfConfigEntry

A row instance contains the configuration to enable or disable trust state for Dynamic ARP Inspection at each physical interface capable of this feature.

cdaiIfTrustEnable

This object indicates whether the interface is trusted for Dynamic ARP Inspection purpose. If this object is set to 'true', the interface is trusted. ARP packets coming to this interface will be forwarded without checking. If this object is set to 'false' ...

cdaiIfRateLimitTable

A table provides the mechanism to configure the rate limit for Dynamic ARP Inspection purpose at each physical interface capable of this feature.

cdaiIfRateLimitEntry

A row instance contains the configuration of rate limit Dynamic ARP Inspection at each physical interface capable of this feature.

cdaiIfRateLimit

This object indicates rate limit value for Dynamic ARP Inspection purpose. If the incoming rate of ARP packets exceeds the value of this object, ARP packets will be dropped.

cdaiVlanStatsTable

A table lists the Dynamic Arp Inspection statistics per VLAN.

cdaiVlanStatsEntry

A row instance contains Dynamic ARP Inspection statistics information for each VLAN.

cdaiVlanStatsIndex

This object indicates the VLAN number.

cdaiVlanForwarded

This object indicates the number of ARP packets forwarded by Dynamic Arp Inspection feature.

cdaiVlanDropped

This object indicates the number of ARP packets dropped by Dynamic ARP Inspection feature.

cdaiVlanAclPermitted

This object indicates the number of ARP packets permitted by the configured ACL.

cdaiVlanDhcpBindingsPermitted

This object indicates the number of DHCP-binding permitted ARP packets.

cdaiVlanAclDenied

This object indicates the number of ARP packets denied by the configured ACL.

cdaiVlanDhcpBindingDenied

This object indicates the number of DHCP-binding denied ARP packets.

cdaiVlanSrcMacValidationFailures

This object indicates the number of ARP packets that fail source MAC address validation.

cdaiVlanDestMacValidationFailures

This object indicates the number of ARP packets that fail destination MAC address validation.

cdaiVlanIpValidationFailures

This object indicates the number of ARP packets that fail IP validation.

cdaiVlanArpProbePermitted

This object indicates the number of ARP Probe packets that are permitted.

cdaiVlanInvalidProtocolData

This object indicates the number of ARP packets that contain invalid protocol data.

cdaiGlobalLoggingGroup

A collection of object which is used to configure Dynamic ARP Inspection logging.

cdaiVlanConfigGroup

A collection of object which are used to configure as well as show information regarding the Dynamic ARP Inspection feature per VLAN.

cdaiIfConfigGroup

A collection of object which are used to configure as well as show information regarding the interface trust state for Dynamic ARP Inspection purpose.

cdaiIfRateLimitGroup

A collection of object which are used to configure as well as show information regarding the rate limit per interface for Dynamic ARP Inspection purpose.

cdaiLoggingConfigGroup

A collection of object which provides logging configuration for Dynamic ARP Inspection feature.

cdaiAddressValidationGroup

A collection of object which provides address validation configuration for Dynamic ARP Inspection feature.

cdaiVlanCfgGroup

A collection of object which provides additional VLAN configuration for Dynamic ARP Inspection feature.

cdaiVlanStatisticsGroup

A collection of object which provides Dynamic ARP Inspection statistics per VLAN.

cdaiLogBufferGroup

A collection of object which provides logging information for Dynamic ARP Inspection feature.

cdaiVlanExtStatisticsGroup

A collection of object which provides additional Dynamic ARP Inspection statistics per VLAN.

cdaiVlanArpProbeGroup

A collection of object which provides additional VLAN configuration for ARP Probe packets.

cdaiLogBufferActionGroup

A collection of object which provides log buffer action.