CISCO-DOT11-ASSOCIATION-MIB Download

cDot11ParentAddress

This is the MAC address of the parent access point or root bridge for this device. The value is zero if this is a root access point or bridge.

cDot11ActiveDevicesTable

This table contains the list of active devices currently associated with this device on each of the IEEE 802.11 interfaces. This table has a sparse dependent relationship on the ifTable.

cDot11ActiveDevicesEntry

An entry represents a currently active device associated with this device. These active devices include: wireless clients, repeaters, and bridges.

cDot11ActiveWirelessClients

This is the number of wireless clients currently associating with this device on this interface.

cDot11ActiveBridges

This is the number of bridges currently associating with this device on this interface.

cDot11ActiveRepeaters

This is the number of repeaters currently associating with this device on this interface.

cDot11AssociationStatsTable

This table contains statistics for various devices associated with this device on each of the IEEE 802.11 interfaces since it was last re-started. These devices include: wireless clients, repeaters, and bridges. This table has a sparse dependent relatio ...

cDot11AssociationStatsEntry

Each entry provides association statistics of various devices interacting with this device on each of the IEEE 802.11 interfaces.

cDot11AssStatsAssociated

This object counts the number of stations associated with this device on this interface since device re-started.

cDot11AssStatsAuthenticated

This object counts the number of stations authenticated with this device on this interface since device re-started.

cDot11AssStatsRoamedIn

This object counts the number of stations roamed from another device to this device on this interface since device re-started.

cDot11AssStatsRoamedAway

This object counts the number of stations roamed away from this device on this interface since device re-started.

cDot11AssStatsDeauthenticated

This object counts the number of stations deauthenticated with this device on this interface since device re-started.

cDot11AssStatsDisassociated

This object counts the number of stations disassociated with this device on this interface since device re-started.

cd11IfCipherStatsTable

This table includes AES, TKIP, and security tempering attempts statistics collected by the IEEE 802.11 radio interfaces and system management. This table has a sparse dependent relationship on the ifTable. For each entry in this table, there exists an e ...

cd11IfCipherStatsEntry

Each entry provides cipher related statistics collected on each of the IEEE 802.11 interfaces.

cd11IfCipherMicFailClientAddress

This is MAC address of the client attached to this radio interface that caused the most recent MIC failure.

cd11IfCipherTkipLocalMicFailures

This object counts the number of MIC failures encountered on this radio interface since device re-started.

cd11IfCipherTkipRemotMicFailures

This object counts the number of MIC failures reported by clients on this radio interface since device re-started.

cd11IfCipherTkipCounterMeasInvok

This object counts the number of TKIP Counter Measures invoked on this interface since device re-started.

cd11IfCipherCcmpReplaysDiscarded

This object counts the number of received unicast fragments discarded by replay mechanism on this interface since device re-started.

cd11IfCipherTkipReplaysDetected

This object counts the number of TKIP replay errors detected on this interface since device re-started.

cDot11ClientConfigInfoTable

This table contains configuration information of client devices. Entries on this table are created by the device radio driver when clients establish association with the device. Entries are removed when clients disassociate with the device. These clien ...

cDot11ClientConfigInfoEntry

Each entry is the device specification of a client of this device on the IEEE 802.11 radio interfaces. Clients are grouped according to the SSIDs of the interfaces they use for associations and the MAC address of their parent devices if the clients are re ...

cDot11ClientAddress

The MAC address of the client.

cDot11ClientParentAddress

The MAC address of the parent of the client if the client is a repeater AP. If this client has no parent, the value is '00000000'h.

cDot11ClientRoleClassType

The role classification of the client.

cDot11ClientDevType

The device type of the client.

cDot11ClientRadioType

The radio classification of the client.

cDot11ClientWepEnabled

When this object is 'true', it indicates that the WEP key mechanism is used for transmitting frames of data for this client. The default value of this object is 'false'.

cDot11ClientWepKeyMixEnabled

When this object is 'true', it indicates that this client is using WEP key mixing.

cDot11ClientMicEnabled

When this object is 'true', it indicates that the MIC is enabled for this client. The default value of this object is 'false'.

cDot11ClientPowerSaveMode

The power management mode of this client. The two possible modes are: active(1) - this client is not in power-save mode and it is actively sending or receiving data. powersave(2) - this client is in power-save mode and it wakes up once a while to chec ...

cDot11ClientAid

This is the association identification number of clients or multicast addresses associating with this device. For a multicast address with clients, the cDot11ClientAid is '0'. For the uplink association from this device to its parent access point, the c ...

cDot11ClientDataRateSet

This is the set of data rates at which this client can transmit and receive data. Each client can support up to 126 rates. Each octet contains an integer value representing one of these 126 rates. Each rate shall be within the range from 2 to 127, corre ...

cDot11ClientSoftwareVersion

This is the Cisco IOS software version if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the firmware version of the client card.

cDot11ClientName

This is the Cisco IOS device hostname if the other end of the association is a bridge, access point, or repeater. If it is a wireless client, this is the configured client name.

cDot11ClientAssociationState

This object indicates the state of the authentication and association process between the two parties: initial(1) - association request received from client, authenNotAssociated(2) - 802.11 authenticated but not 802.11 associated, assocAndAuth ...

cDot11ClientIpAddressType

This is the IP address type of the cDot11ClientIpAddress.

cDot11ClientIpAddress

This is the static or DHCP assigned IP address of the client.

cDot11ClientVlanId

This is the VLAN which this wireless client is assigned to when it is successfully associated to the wireless station. The value is 0 if this wireless client is not assigned to any VLAN or this wireless station is not configured with any VLAN.

cDot11ClientSubIfIndex

This is the ifIndex of the sub-interface which this wireless client is assigned to when it is successfully associated to the wireless station. The value of this object is 0, if this wireless station is not configured with VLAN and this wireless client is ...

cDot11ClientAuthenAlgorithm

This is the IEEE 802.11 authentication methods performed between the wireless station and this client during association.

cDot11ClientAdditionalAuthen

These are the additional authentications that were performed after IEEE 802.11 Open System or Shared Key authentication had completed. If none of the bits is set, no additional MAC address or EAP authentication was performed during association.

cDot11ClientDot1xAuthenAlgorithm

This the IEEE 802.1x authentication methods performed between this wireless client and the authentication server. If none of the bits is set, no IEEE 802.1x authentication was performed during association.

cDot11ClientKeyManagement

This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed.

cDot11ClientUnicastCipher

These are all the possible unicast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any unicast data frame encryption. aesccm WPA AES CCMP encrypt ...

cDot11ClientMulticastCipher

These are all the possible multi-cast data frame cipher encryption type combinations currently supported on this IEEE 802.11 client. If none of the bits is set, the client is not performing any multi-cast data frame encryption. aesccm WPA AES CCMP e ...

cDot11ClientDevObjectID

This object indicates the authoritative identification of the associated 802.11 client as assigned by the respective vendor. A value of '0.0' shall be populated if no such identification exists for this 802.11 client.

cDot11ClientNewKeyManagement

This is the encryption key management methods employed by this client for IEEE 802.11 wireless frame encryption. If none of the bits is set, no key management method is employed.

cDot11ClientStatisticTable

This table contains statistics and status of all clients on the cDot11ClientConfigInfoTable. This table has a one-to-one relationship with the cDot11ClientConfigInfoTable.

cDot11ClientStatisticEntry

Each entry contains statistics about errors, data transmitting and receiving rates and counts information of a client.

cDot11ClientCurrentTxRateSet

This is the set current transmit data rates for this client. Each client can transmit data at all of its configured rates. There is a maximum of 126 it can configure to transmit. Each octet contains an integer value representing one of these 126 rates ...

cDot11ClientUpTime

The time in seconds that this client has been associated with this device.

cDot11ClientSignalStrength

This is a device-dependent measure of the signal strength of the most recently received packet from this client. It may be normalized or unnormalized.

cDot11ClientSigQuality

This is a device-dependent measure of the signal quality of the most recently received packet from this client.

cDot11ClientAgingLeft

The number of seconds of aging time left for this client.

cDot11ClientPacketsReceived

The number of packets received from this client.

cDot11ClientBytesReceived

The number of bytes received from this client.

cDot11ClientPacketsSent

The number of packets sent to this client.

cDot11ClientBytesSent

The number of bytes sent to this client.

cDot11ClientDuplicates

This counter increments when a packet for this client is received and the Sequence Control field in the packet header indicates the packet is a duplicate.

cDot11ClientMsduRetries

This counter increments when an MSDU is successfully transmitted after one or more retransmissions for this client.

cDot11ClientMsduFails

This counter increments when an MSDU is not transmitted successfully for this client due to the number of transmit attempts exceeding some limit.

cDot11ClientWepErrors

This is the number of packets received from this client which failed to be properly decrypted via the WEP security mechanism.

cDot11ClientMicErrors

This is the number of MIC errors for this client.

cDot11ClientMicMissingFrames

This is the number of missing MIC packets for this client.

ciscoDot11AssocGlobalGroup

This is the device association information group. This is deprecated in favor of the ciscoDot11IfAssocStatGroup.

ciscoDot11ClientConfigGroup

This is the client configuration information group.

ciscoDot11ClientStatGroup

This is the client statistics group.

ciscoDot11ClientInfoGroup

This group provides additional client specific information.

ciscoDot11ApAssocGlobalGroup

This group includes per AP or bridge global configuration information.

ciscoDot11IfAssocStatGroup

This group includes per IEEE 802.11 radio interface association statistics.

ciscoDot11IfCipherStatGroup

This group includes per IEEE 802.11 radio interface cipher related statistics collected.

ciscoDot11ClientAuthenGroup

This group includes per IEEE 802.11 radio interface cipher related statistics collected.

ciscoDot11ClientConfigExtGroup

This group provides more configuration information about a particular associated 802.11 client.

ciscoDot11ClientNewAuthenGroup

This group includes per IEEE 802.11 radio interface cipher related statistics collected.