CISCO-CABLE-DIAG-MIB

CISCO-CABLE-DIAG-MIB Download

MIBs list

This MIB module defines objects for managing cable diagnostic test capabilites supported by the Cisco devices.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-CABLE-DIAG-MIB

ccdPrbsIfTable
A table containing information about PRBS (Pesudo Random Binary Sequence) test on the device's interfaces. An entry appears in this table for each interface which is capable to run PRBS test.
ccdPrbsIfEntry
An entry in the ccdPrbsIfTable, containing the information about PRBS test on an interface.
ccdPrbsIfAction
Indicates the PRBS test action to be executed on the interface and whether the test is currently running or not. 'start' -- start the PRBS test on the interface. 'stop' -- stop the PRBS test on the interface. 'errorReset' -- reset the object value of ccd ...
ccdPrbsIfActionStatus
Indicates the status of the last PRBS test action set on the interface.
ccdPrbsIfTestErrors
Indicates the number of errors which occurred during the current or most recent running of a test. This Gauge is reset to zero each time a test starts (e.g., when ccdPrbsIfAction is set to 'start') or each time ccdPrbsIfAction is set to 'errorReset' on an ...
ccdPrbsIfTestErrorsResetTime
Indicates the most recent time that the corresponding instance of ccdPrbsIfTestErrors is reset to zero. If the the corresponding instance of ccdPrbsIfTestErrors is never reset to zero, then the instance value for ccdPrbsIfTestErrorsResetTime will be zero.
ccdPrbsIfTestErrorsMaxValue
Indicates the maximum value of the corresponding instance of ccdPrbsIfTestErrors.
ccdTdrIfTable
A table containing information about TDR (Time Domain Reflectometery) test on the device's interfaces. An entry appears in this table for each interface which is capable to run TDR test.
ccdTdrIfEntry
An entry in the ccdTdrIfTable, containing the information about TDR test on an interface.
ccdTdrIfAction
Indicates the TDR test action to be executed on the interface and whether the test is currently running or not. 'start' -- start the TDR test on the interface. 'clear' -- clear all the TDR test results on the interface. After this action is executed on an ...
ccdTdrIfActionStatus
Indicates the status of the last TDR test action set on the interface.
ccdTdrIfLastTestTime
Indicates the timestamp when TDR test is last run on the interface. If TDR test is never run on an interface, then this object value will be zero.
ccdTdrIfResultValid
Indicates whether the TDR test result on the interface is valid for the user to retrieve or not.
ccdTdrIfResultTable
A table containing information about TDR test result on the device's interfaces. An entry appears in this table for each cable pair on an interface which has valid TDR test result, i.e., the value of ccdTdrIfResultValid for the interface is true(1).
ccdTdrIfResultEntry
An entry in the ccdTdrIfResultTable, containing the information about TDR test on an interface.
ccdTdrIfResultPairIndex
The local cable pair index. 'pair1to2' -- the pair with cable connectors 1 and 2. 'pair3to6' -- the pair with cable connectors 3 and 6. 'pair4to5' -- the pair with cable connectors 4 and 5. 'pair7to8' -- the pair with cable connectors 7 and 8.
ccdTdrIfResultPairChannel
The channels that the cable pair is connected to. 'other' -- none of the following. 'channelA' -- channel A. 'channelB' -- channel B. 'channelC' -- channel C. 'channelD' -- channel D.
ccdTdrIfResultPairLength
The length of the cable pair. A value of -1 indicates the length value is invalid. The unit of this value is indicated by ccdTdrIfResultPairLengthUnit of the same cable pair.
ccdTdrIfResultPairLenAccuracy
The length accuracy of the cable pair. This value should be added to and deducted from the value of ccdTdrIfResultPairLength of the same cable pair to form the upper and lower range of the cable pair length. A value of -1 indicates the length accuracy val ...
ccdTdrIfResultPairDistToFault
The distance to the fault point of the cable pair. A value of -1 indicates this value is invalid. The unit of this value is indicated by ccdTdrIfResultPairLengthUnit of the same cable pair.
ccdTdrIfResultPairDistAccuracy
The accuracy of the distance to the fault point for the cable pair. This value should be added to and deducted from the value of ccdTdrIfResultPairDistToFault of the same cable pair to form the upper and lower range of the distance to fault point for the ...
ccdTdrIfResultPairLengthUnit
The measurement unit on the length or the distance to fault point for the cable pair. 'unknown' -- none of the following. 'meter' -- the unit is meter. 'centimeter' -- the unit is centimeter. 'kilometer' -- the unit is kilometer.
ccdTdrIfResultPairStatus
The status of the cable pair. 'unknown' -- none of the following. 'terminated' -- the pair is properly terminated at the remote end. 'notCompleted' -- the test on this pair is not completed. 'notSupported' -- the test on this pair is not suppo ...
ccdPrbsGroup
A collection of managed objects to support PRBS cable diagnotic test on the interfaces of the device.
ccdTdrGroup
A collection of managed objects to support TDR cable diagnotic test on the interfaces of the device.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list