CISCO-APS-MIB

CISCO-APS-MIB Download

MIBs list

This management information module supports theconfiguration and management of SONET linear APS groups.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-APS-MIB

cApsConfigGroups
The count of APS groups. This count includes all rows in cApsConfigTable.
cApsConfigTable
This table lists the APS groups that have been configured on the system.
cApsConfigEntry
A conceptual row in the cApsConfigTable.
cApsConfigName
A textual name for the APS group. ::= { cApsConfigEntry 1 } SYNTAX RowStatus MAX-ACCESS read-create STATUS current DESCRIPTION The status of this APS group entry. An entry may not exist in the active state unless all objects in the entry have a ...
cApsConfigMode
The architecture of the APS group. onePlusOne The 1+1 architecture permanently bridges the working line to the protection line. oneToN The 1:n architecture allows one protection channel to protect up to n working channels. When a fault is detected on one ...
cApsConfigRevert
The revertive mode of the APS group. nonrevertive Traffic remains on the protection line until another switch request is received. revertive When the condition that caused a switch to the protection line has been cleared the signal is switched back to the ...
cApsConfigExtraTraffic
This object enables or disables the transfer of extra traffic on the protection channel in a 1:n architecture. This object must be set to disabled if the architecture is 1+1. It may be necessary to disable this in order to interwork with other SONET netwo ...
cApsConfigSdBerThreshold
The Signal Degrade Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. This object may be modified if ...
cApsConfigSfBerThreshold
The Signal Failure Bit Error Rate. The negated value of this number is used as the exponent of 10 for computing the threshold value for the Bit Error Rate (BER). For example, a value of 5 indicates a BER threshold of 10^-5. This object may be modified if ...
cApsConfigWaitToRestore
The Wait To Restore period in seconds. After clearing of a condition that necessitated an automatic switch, the wait to restore period must elapse before reverting. This is intended to avoid rapid switch oscillations. GR-253-CORE specifies a Wait To Resto ...
cApsConfigCreationTime
The value of sysUpTime at the time the row was created
cApsStatusTable
This table provides status information about APS groups that have been configured on the system.
cApsStatusEntry
A conceptual row in the cApsStatusTable. Entries in this table are created as a side effect of row addition in cApsConfigTable.
cApsStatusK1K2Rcv
The current value of the K1 and K2 bytes received on the protection channel.
cApsStatusK1K2Trans
The current value of the K1 and K2 bytes transmitted on the protection channel.
cApsStatusCurrent
The current status of the APS group. modeMismatch Modes other than 1+1 unidirectional monitor protection line K2 bit 5, which indicates the architecture and K2 bits 6-8, which indicate if the mode is unidirectional or bidirectional. A conflict between the ...
cApsStatusModeMismatches
A count of Mode Mismatch conditions.
cApsStatusChannelMismatches
A count of Channel Mismatch conditions.
cApsStatusPSBFs
A count of Protection Switch Byte Failure conditions. This condition occurs when either an inconsistent APS byte or an invalid code is detected. An inconsistent APS byte occurs when no three consecutive K1 bytes of the last 12 successive frames are identi ...
cApsStatusFEPLFs
A count of Far-End Protection-Line Failure conditions. This condition is declared based on receiving SF on the protection line in the K1 byte.
cApsStatusSwitchedChannel
This field is set to the number of the channel that is currently switched to protection. The value 0 indicates no channel is switched to protection. The values 1-14 indicate that working channel is switched to protection.
cApsChanLTEs
The count of SONET LTE interfaces on the system. Each interface that is included has an ifType value of sonet(39).
cApsMapTable
This table lists the SONET LTE interfaces on the system. Each interface that is listed has an ifType value of sonet(39).
cApsMapEntry
A conceptual row in the cApsMapTable.
cApsMapIfIndex
The Interface Index assigned to a SONET LTE. This is an interface with ifType sonet(39).
cApsMapGroupName
A textual name for the APS group which this channel is included in. If the channel is not part of an APS group this value is set to a string of size 0. When an instance of cApsChanConfigIfIndex is set equal to an instance of cApsMapIfIndex, cApsMapGroup ...
cApsChanConfigTable
This table lists the APS channels that have been configured in APS groups.
cApsChanConfigEntry
A conceptual row in the cApsChanConfigTable.
cApsChanConfigGroupName
A textual name for the APS group which this channel is included in.
cApsChanConfigNumber
This field is set to a unique channel number within an APS group. The value 0 indicates the null channel. The values 1-14 define a working channel. This field must be assigned a unique number within the group.
cApsChanConfigRowStatus
The status of this APS channel entry. An entry may not exist in the active state unless all objects in the entry have an appropriate value. A row in the cApsChanConfigTable may not be created, deleted, set to notInService or otherwise modified if the cAp ...
cApsCommandEntry
A conceptual row in the cApsCommandTable. This row exists only if the associated cApsConfigEntry is active.
cApsCommandSwitch
Allows the initiation of an APS switch command on the APS group and channel specified by the index values. If the APS switch command cannot be executed because an equal or higer priority request is in effect, an error is returned. When read this object re ...
cApsChanStatusEntry
A conceptual row in the cApsChanStatusTable. A row in this table is created as a side effect of row addition in the cApsChanConfigTable. The cApsChanStatusTable row exists as long as the cApsChanConfigTable entry exists, regardless of whether the associ ...
cApsChanStatusSignalFailures
A count of Signal Failure conditions that have been detected on the incoming signal. This condition occurs when a loss of signal, loss of frame, AIS-L or a Line bit error rate exceeding 10^-3 is detected on an incoming line.
cApsChanStatusSwitchovers
The number of times this channel has switched to the protection line. When queried with index value cApsChanConfigNumber set to 0, which is the protection line, this object will return 0.
cApsChanStatusLastSwitchover
The value of sysUpTime when this channel last completed a switch to the protection line. If this channel has never switched to the protection line, or this channel is the protection line, the value 0 will be returned.
cApsChanStatusSwitchoverSeconds
The cumulative Protection Switching Duration (PSD) time in seconds. For a working channel, this is the cumulative number of seconds that service was carried on the protection line.For the protection line, this is the cumulative number of seconds that the ...
cApsConfigGeneral
A collection of cApsConfigTable objects providing configuration information applicable to all linear APS groups.
cApsConfigWtr
The cApsConfigTable object that provides information which is applicable to groups supporting a configurable WTR period.
cApsCommandOnePlusOne
The cApsCommandTable object which is applicable to groups implementing the linear APS 1+1 architecture. Also, set operations must be supported.
cApsCommandOneToN
A collection of cApsCommandTable objects which are applicable to groups implementing the linear APS 1:n architecture. Also, set operations must be supported.
cApsStatusGeneral
A collection of cApsStatusTable objects providing status information applicable to all linear APS groups.
cApsChanGeneral
A collection of channel objects providing information applicable to all linear APS channels.
cApsChanOneToN
The cApsChanConfigTable object that provides information which is only applicable to groups implementing the linear APS 1:n architecture.
cApsTotalsGroup
A collection of objects providing optional counts of configured APS groups and SONET LTE interfaces.
cApsMapGroup
A collection of cApsMapTable objects providing a mapping from sonet(39) InterfaceIndex to group name and channel number for assigned APS channels and a list of unassigned sonet(39) interfaces.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list