APCUPS-MIB

APCUPS-MIB Download

MIBs list

IPHost Network Monitor offer an easy way of SNMP monitoring your Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for APCUPS-MIB

tComponentid
This groupis required.
eComponentid
INDEX {DmiComponentIndex} ::= {tComponentid 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "Manufacturer of this system.
a1Product
Product name for this system.
a1Version
Version number of this system.
a1SerialNumber
Serial number for this system.
a1Installation
The time and date when this component was installed.
a1Verify
is stillinstalled and working.
tUpsBattery
UPSsystem's battery status.
eUpsBattery
INDEX {DmiComponentIndex} ::= {tUpsBattery 1} SYNTAX INTEGER { vUnknown (1), vBatteryNormal (2), vBatteryLow (3), vBatteryDepleted (4) } ACCES ...
a2SecondsOnBattery
since theUPS last switched to battery power, or the time since the UPS component software waslast restarted, whichever is less. Zero shall be returned if the UPS is not on batterypower.
a2EstimatedMinutesRemaining
under thepresent load conditions if the utility power is off and remains off, or if it were to be lostand remain off.
a2EstimatedChargeRemaining
the present load conditions if theutility power is off and remains off, or if it were to be lost and remain off. The valuerepresents a percent of full charge.
a2BatteryVoltage
DC.
a2BatteryCurrent
The present battery current in 0.1 Amps DC.
a2TemperatureProbeIndex
the ambienttemperature at or near the UPS battery casing.
a2FruGroupIndex
FRU, this providesan index into the FRU table; 'value = -1' indicates that the group is not a FRU.
a2OperationalGroupIndex
The index into the Operational State table for this device.
tTemperatureProbe
in thissystem.
eTemperatureProbe
INDEX {DmiComponentIndex} ::= {tTemperatureProbe 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Index into this temperature probe table.
a3TemperatureProbeLocation
Identifies the physical location of the temperature probe.
a3TemperatureProbeDescription
probe orprobe's location.
a3TemperatureStatus
reprobe.
a3TemperatureProbeTemperatureReading
in 1/10th degrees C. 0x8000000 denotes 'unknown' or 'unsupported'.
a3MonitoredTemperatureNominalReading
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported' ::= {eTemperatureProbe 6} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The normal maximum temperature reading of the temperature monitored by this prob ...
a3MonitoredTemperatureNormalMinimum
monitored by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureProbeMaximum
by this probe in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported' ::= {eTemperatureProbe 9} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The minimum temperature reading specified to be readable by this probe in 1/10th ...
a3TemperatureReadingUpperThreshold-Non-c
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureReadingLowerThreshold-Criti
1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureReadingUpperThreshold-Criti
/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureReadingLowerThreshold-Non-r
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureReadingUpperThreshold-Non-r
in 1/10th degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureProbeResolution
in tenths of 1/10th degrees C. '0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureProbeTolerance
in plus/minus 1/10 degrees C. 0x80000000 denotes 'unknown' or 'unsupported'.
a3TemperatureProbeAccuracy
in plus/minus hundredths of a percent. 0x80000000 denotes 'unknown' or 'unsuppor ed'.
a3FruGroupIndex
device is not an FRU.
a3OperationalGroupIndex
Index into the Operational State table
tOperationalStateTable
y status,and administrative state indicators for specific Device Group instances ::= {dmtfGroups 4} SYNTAX SOperationalStateTable ACCESS not-accessible STATUS mandatory DESCRIPTION "
a4OperationalStateInstanceIndex
The Index into the Operational State table.
a4DeviceGroupIndex
The group ID of the group referencing this instance.
a4OperationalStatus
The operational status of the Device Group instance.
a4UsageState
The usage state of the Device Group instance.
a4AvailabilityStatus
The availability status of the Device Group instance.
a4AdministrativeState
The administrative state of the Device Group instance.
a4FatalErrorCount
this DeviceGroup instance.
a4MajorErrorCount
Groupinstance.
a4WarningErrorCount
DeviceGroup instance.
a4CurrentErrorStatus
Device Groupinstance. The most critical error status in effect should be presented. I.e. if a part of theDevice Group instance is 'Critical', while other status is 'Non-critical' then the status'Critical' should be reported.
tDiagnostics
by thiscomponent for analyzing potential failures within the component. A diagnosticfunction could be an actual test run against the component, the results of a self-test ofthe component, an analysis of failure information captured during a failure of the ...
eDiagnostics
INDEX {DmiComponentIndex, a5DiagnosticFunctionTableIndex} ::= {tDiagnostics 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "A unique identifier for this specific diagnostic function. ::= {eDiagnostics 1} SYNTAX DmiDisplaystring AC ...
a5DiagnosticFunctionDescription
A description of what this diagnostic function does.
a5ExclusiveAccessRequired
access tothe device or component, implying that the user or management applicati n must takesome action within the operating system to ensure that the device or component cannotbe used by any other function.
a5PrerequisiteConditions
functioncan be run.
a5PrerequisiteDiagnosticFunction
that must berun immediately prior to this one.
tDiagnosticRequestGroup
usesto request an actual diagnostic analysis.
eDiagnosticRequestGroup
INDEX {DmiComponentIndex} ::= {tDiagnosticRequestGroup 1} SYNTAX DmiInteger ACCESS read-write STATUS mandatory DESCRIPTION "Indicates whether the interface to this component's diagnostic functionsis reserved. A zero value returned on a get indicates t ...
a6DiagnosticFunctionRequest
requested. Ifthe interface is reserved, a set request to this attribute should also set the DiagnosticFunction Reserve Key with the reserve key value.
a6DiagnosticFunctionResult
run.
tDiagnosticResults
functionresult codes.
eDiagnosticResults
INDEX {DmiComponentIndex, a7DiagnosticFunctionId, a7DiagnosticFunctionResult} ::= {tDiagnosticResults 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "The unique ID for a specific diagnostic function.
a7DiagnosticFunctionResult
::= {eDiagnosticResults 2} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "A description of what this result code for this diagnostic functionmeans, including suggested corrective actions, where possible.
a7FaultIsolatedToThisComponent
the bounds ofthis component. A False value indicates that the fault might be caused by a failingparent component; for example, a disk test may fail because of a faulty disk controller.
tErrorControlGroup
Indication control and status for the parent group.
eErrorControlGroup
INDEX {DmiComponentIndex} ::= {tErrorControlGroup 1} SYNTAX DmiInteger ACCESS read-only STATUS mandatory DESCRIPTION "Instance id. A unique number that identifies this row.
a8NumberOfFatalErrors
Count of all fatal errors since system startup.
a8NumberOfMajorErrors
Count of all major errors since system startup.
a8NumberOfWarnings
Count of all warning errors since system startup.
a8ErrorStatus
current error status
a8ErrorStatusType
status.
a8AlarmGeneration
Controls indication generation for errors.
tMiftomib
SNMP translati n.
eMiftomib
INDEX {DmiComponentIndex} ::= {tMiftomib 1} SYNTAX DmiDisplaystring ACCESS read-only STATUS mandatory DESCRIPTION "The MIB name that defines this MIF
a99MibOid
The MIB Object Identifier that corresponds to this MIF
a99DisableTrap
from this component
tTrapGroup
definition. This group does not exist in MIF file
eTrapGroup
INDEX {DmiComponentIndex} ::= {tTrapGroup 1} SYNTAX DisplayString ACCESS read-only STATUS mandatory DESCRIPTION "The Date & Time when the error occured
a9999ErrorStatus
Error Status Code
a9999ErrorGroupId
Group ID of the errorControl Group
a9999ErrorInstanceId
Instance ID of the errorControl Group
a9999ComponentId
Component ID of the component that caused this error
a9999GroupId
Group ID of the Group that caused this error
a9999InstanceId
Instance ID of the Group that caused this error
a9999VendorCode1
Vendor specific code 1
a9999VendorCode2
Vendor specific code 2
a9999VendorText
Vendor specific octet string info
a9999ParentGroupId
Group ID of parent of Group that caused this error
a9999ParentInstanceId
Instance ID of parent of Group that caused this error

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list