A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB

A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB Download

MIBs list

With the IPHost SNMP tool, you can monitor any SNMP objects of the A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB .

OID list for A3COM-SWITCHING-SYSTEMS-ROUTEPOLICY-MIB

a3ComRoutePolicyTable
This table is used to provide routing policy facilities. The implementation allows a list of policies to be set up and matched before a given route is learned or advertised by the router, which is the device being managed.
a3ComRoutePolicyEntry
An entry used to define a routing policy. A row in this table is created by setting a3ComRoutePolicyRowStatus to createAndGo(4) or createAndWait(5), indexed by the next available index (a3ComRoutePolicyNextFreeIndex). The only mandatory object in this tab ...
a3ComRoutePolicyIndex
Unique identifier of a row in the policy table. The actual number of rows that can be created on any particular device depends on the memory and processing resources available at the time.
a3ComRoutePolicyProtocolType
This mandatory object defines the protocol in which a policy will be used. Once such protocol family is defined, the agent will use this information to parse the source, route, as well as all other objects that apply. Once a policy entry is successfully m ...
a3ComRoutePolicyType
This object specifies what type of policy this is. The type import regards to ingress -- where a route advertised externally is learned by the device managed. And the type export regards to egress -- where a route is advertised by the device managed. Not ...
a3ComRoutePolicyOriginProtocol
This object is only used when a3ComRoutePolicyType is set to export(2). It makes up a mask of protocols, within the protocol suite, that matches the policy entry. If set to zero, the mask will be interpreted as a match, independent of how the route was le ...
a3ComRoutePolicySourceAddress
This DisplayString is the network address of the gateway to the route address. Note that when the policy is of the type import(1), this object will correspond to a neighboring router address, and for export(2) policies, this object will most likely corres ...
a3ComRoutePolicyRouteAddress
This DisplayString is the network address of the route to which this policy applies. Such address will be known when a route advertisement is received by the device being managed. The following formats can be used for this object: IP cccc ...
a3ComRoutePolicyRouteMask
This DisplayString is the network mask of the route to which this policy applies. The following formats can be used: IP cccc - ipAddress MIB IP nnn.nnn.nnn.nnn - decimal dotted format The agent will be smart enough to ...
a3ComRoutePolicyAction
This object specifies whether the protocol rejects a route that matches the policy or accepts it. a3ComRoutePolicyAction can be modified at any time.
a3ComRoutePolicyAdjustMetric
This object defines what type of operation that can be additionally performed at a route metric. Note that this object will be always ignored if a3ComRoutePolicyAction is of the type reject(2). Furthermore, a3ComRoutePolicyAdjustMetric will also be ignore ...
a3ComRoutePolicyMetric
This object is the value by which an additional adjustment can be performed on a matched route metric. The actual operation performed is defined by a3ComRoutePolicyAdjustMetric. If a3ComRoutePolicyMetric is zero, no metric adjustments are made. If a3ComRo ...
a3ComRoutePolicyWeight
This object assigns an administrative weight to the policy entry. A policy with a higher value takes precedence over a policy with a lower value. Usage of a3ComRoutePolicyWeight applies when an order of precedence is desired within multiple policies that ...
a3ComRoutePolicyExportType
This object describes which type of route advertisement the router will use when a given protocol can export routes in multiple ways. In situations when there is only one way routes can be exported, a3ComRoutePolicyExportType will be ignored. If a3ComRout ...
a3ComRoutePolicyRowStatus
The status column for a routing policy. This object can be set to: active(1), createAndGo(4), createAndWait(5), destroy(6) The following values may be read: inactive(2) active(1) A new policy entry in this table is created by setting this object to create ...
a3ComRoutePolicyNextFreeIndex
The value of the next available policy entry. This object is automatically increased once a new policy is successfully made active(1). A new policy entry in a3ComRoutePolicyTable is created by setting a3ComRoutePolicyRowStatus to createAndGo(4) or createA ...
a3ComRoutePolicyIpIfTable
This table is used to provide a list of ip interfaces under a given policy. Thus, the list generated under this table only applies to policies under the ip suite. Furthermore, the current mib specification resorts only two conditions: 1) a3ComRoutePolicyP ...
a3ComRoutePolicyIpIfEntry
An entry used to define an ip interface under a policy. A row in this table is created by setting a3ComRoutePolicyIpIfRowStatus with createAndGo(4), indexed by the id of an existing a3ComRoutePolicyEntry and the address of an existing ip interface at the ...
a3ComRoutePolicyIpIfIndex
The identifier of a policy entry under a3ComRoutePolicyTable that this entry belongs to. Note that it is possible to have multiple entries in this table (a3ComRoutePolicyIpIfTable) with the same a3ComRoutePolicyIpIfIndex, and that is why this table is ind ...
a3ComRoutePolicyIpIfAddressIndex
The address of an existing ip interface at the device being managed.
a3ComRoutePolicyIpIfRowStatus
The status column for an ip interface of a routing policy. This object can be set to: createAndGo(4), destroy(6) The following values may be read: active(1) A new ip interface entry in this table is created by setting this object to createAndGo(4), indexe ...

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list