A3COM-SWITCHING-SYSTEMS-FDDI-MIB Download

a3ComFddiSMTTable

A list of optional SMT entries. The number of entries shall not exceed the value of snmpFddiSMTNumber.

a3ComFddiSMTEntry

An optional SMT entry containing information common to a given optional SMT.

a3ComFddiSMTIndex

A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

a3ComFddiSMTManufacturerOUI

The three octets of manufacturer data which make up the manufacturerOUI component.

a3ComFddiSMTManufacturerData

The 29 octets of manufacturer data which make up the manufacturerData component.

a3ComFddiSMTHoldState

This variable indicates the current state of the Hold function. The value 'not-holding' is the default and initial value. The value must be set to 'not-holding' as part of Active_Actions and when the conditions causing 'holding-prm' or 'holding-sec' are ...

a3ComFddiSMTSetCount

This variable is composed of a count incremented in response to a Set operation on the MIB, and the time of the change, however only the count is reported here (refer to ANSI SMT 8.4.1).

a3ComFddiSMTLastSetStationId

The Station ID of the station that effected the last change in the FDDI MIB.

a3ComFddiMACBridgeFunctionTable

A list of MAC bridge function entries.

a3ComFddiMACBridgeFunctionEntry

Bridge function information for a given MAC within a given SMT.

a3ComFddiMACBridgeFunctionSMTIndex

A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

a3ComFddiMACBridgeFunctionMACIndex

Index variable for uniquely identifying the MAC object instances.

a3ComFddiMACBridgeFunctions

Indicates the MAC's optional bridging functions. The Value -1 is used to indicate that bridging is not supported by this MAC. The value is a sum. This value initially takes the value zero, then for each function present, 2 raised to a power is added to t ...

a3ComFddiMACTPriTable

A list of MAC T-Pri entries.

a3ComFddiMACTPriEntry

A collection of T-Pri information for a given MAC within a given SMT.

a3ComFddiMACTPriSMTIndex

A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

a3ComFddiMACTPriMACIndex

Index variable for uniquely identifying the MAC object instances.

a3ComFddiMACTPri0

This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.

a3ComFddiMACTPri1

This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.

a3ComFddiMACTPri2

This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.

a3ComFddiMACTPri3

This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.

a3ComFddiMACTPri4

This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.

a3ComFddiMACTPri5

This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.

a3ComFddiMACTPri6

This attribute is an unsigned twos-complement T_pri threshold as described in the MAC standard converted to non-twos-complement form and reported in 1 ns units.

a3ComFddiPATHRingTable

A list of PATH ring entries.

a3ComFddiPATHRingEntry

Ring latency, trace status, and T-Rmode information for a given PATH within a given SMT.

a3ComFddiPATHRingSMTIndex

A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

a3ComFddiPATHRingPATHIndex

Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.

a3ComFddiPATHRingLatency

Gives the total accumulated latency of the ring associated with this path. May be measured directly by the station or calculated by a management station. Values of this object are reported in 1 ns units.

a3ComFddiPATHTraceStatus

This attribute indicates the current trace status of the path. The value is a sum which represents all of the trace status information which applies. This value initially takes the value zero, then for each condition which applies, 2 raised to a power is ...

a3ComFddiPATHT-Rmode

Used by RMT to limit the duration of restricted dialogs on a path. This object is reported in 1 ns units.

a3ComFddiPATHSbaTable

A list of PATH Sba entries.

a3ComFddiPATHSbaEntry

Sba information for a given PATH within a given SMT.

a3ComFddiPATHSbaSMTIndex

A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

a3ComFddiPATHSbaPATHIndex

Index variable for uniquely identifying the primary, secondary and local PATH object instances. Local PATH object instances are represented with integer values 3 to 255.

a3ComFddiPATHSbaPayload

The payload portion of the Synchronous Bandwidth Allocation for thi path. This value represents the maximum number of bytes of data allocated for transmission per 125 microseconds.

a3ComFddiPATHSbaOverhead

The overhead portion of the Synchronous Bandwith Allocation for this path. This value repersents the maximum number of bytes overhead (token capture, frame header, etc.) used pre negotiated Target Token Rotation Time (T_neg).

a3ComFddiPATHSbaAvailable

This value is the maximum Synchronous Bandwith available for a path in bytes per second.

a3ComFddiPORTTable

A list of optional PORT entries.

a3ComFddiPORTEntry

MAC loop time and EB error count information for a given PORT within a given SMT.

a3ComFddiPORTSMTIndex

A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

a3ComFddiPORTIndex

Index variable for uniquely identifying the PORT object instances.

a3ComFddiPORTMACLoopTime

This attribute controls the value used for T_Next(9) (see 9.4.4.2.3). This object is reported in 1 ns units.

a3ComFddiPORTEBErrorCt

A count that should as closely as possible match the times an Elasticity Buffer Error has occurred while in active line state.

a3ComFddiPORTLSTable

A list of optional PORT line state entries.

a3ComFddiPORTLSEntry

Maintenance line state and PC line state information for a given PORT within a given SMT.

a3ComFddiPORTLSSMTIndex

A unique value for each SMT. Its value ranges between 1 and the value of snmpFddiSMTNumber. The value for each SMT must remain constant at least from one re-initialization of the entity's network management system to the next re-initialization.

a3ComFddiPORTLSPORTIndex

Index variable for uniquely identifying the PORT object instances.

a3ComFddiPORTMaintLS

The PORT Maintenance Line State specifies the line state (Maint_LS) to be transmitted when the PCM state machine for the port is in state PC9 Maint.

a3ComFddiPORTPCLS

This attribute indicates the line state (PC_LS) received by the port.