A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB

A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB Download

MIBs list

The Switching Systems MIB bridge group. Implementation of this group is mandatory for agents which manage bridge resources.

With the IPHost SNMP tool, you can monitor any SNMP objects of the A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB . You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB .

OID list for A3COM-SWITCHING-SYSTEMS-BRIDGE-MIB

a3ComSysBridgeCount
The count of bridges managed by this agent.
a3ComSysBridgeTable
A list of bridge entries. A single entry exists in this list for each bridge managed by this agent.
a3ComSysBridgeEntry
A bridge entry contains information about a particular bridge managed by this agent.
a3ComSysBridgeIndex
The index of the bridge identified by this entry, relative to this agent.
a3ComSysBridgePortCount
The number of bridge ports that the bridge identified by this entry controls.
a3ComSysBridgeAddressTableSize
The size of the address table for the bridge identified by this entry.
a3ComSysBridgeAddressTableCount
The current count of addresses in the address table for the bridge identified by this entry.
a3ComSysBridgeAddressTablePeakCount
The peak count of addresses in the address table for the bridge identified by this entry, since the system was last initialized.
a3ComSysBridgeAddressThreshold
A reporting threshold for the total number of addresses known for the bridge identified by this entry. When this threshold is reached, the event a3ComSysBridgeAddressThresholdEvent is generated. The range of valid values for setting this object is betwe ...
a3ComSysBridgeMode
The operational mode of the bridge identified by this entry. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
a3ComSysBridgeBackbonePort
The number of the port selected as the backbone segment port when the corresponding value of a3ComSysBridgeMode is is expressMode(1). The value of this object can range from 1 to the corresponding value of a3ComSysBridgePortCount, however, some bridges m ...
a3ComSysBridgeIpFragmentationEnabled
A flag indicating whether or not IP fragmentation is enabled on this bridge. Note that bridges which report notSupported(3) will not support sets of this object, and that the value notSupported(3) is not a valid value for a set operation.
a3ComSysBridgeTrFddiTranslationMode
The mode used to describe whether the embedded MAC addresses are byte-conjugated in order to convert them from Token Ring format to native FDDI format (and vice versa), or whether they are left alone (used for traffic flowing across a FDDI backbone to/fro ...
a3ComSysBridgeSTPGroupAddress
Spanning tree bridge group address. The address cannot be changed if the spanning tree is enabled (a3ComSysBridgeStpEnabled).
a3ComSysBridgeSTPEnable
This object indicates if spanning tree bridge feature is enabled or disabled. If enabled this value will equal true(1).
a3ComSysBridgeIpxSnapTranslationEnable
This object indicates if the IPX 802.3-FDDI SNAP Translation bridge feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.
a3ComSysBridgeLowLatencyEnable
This object indicates if the bridge low latency feature is enabled or disabled. If enabled this value will equal true(1). Note, this object may not be supported on all bridges.
a3ComSysBridgeVlanMode
This object indicates the VLAN types that this bridge will support. Open mode means that each VLAN within this bridge will be of the Open type; all VLANs within this bridge will share the same address table. Closed mode means that each VLAN within this b ...
a3ComSysBridgeRateLimitReceiveMulticast
This object limits the number of multicast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device.
a3ComSysBridgeRateLimitReceiveBroadcast
This object limits the number of broadcast frames forwarded by this port over a 1 second interval. The value is set across all ports on the device.
a3ComSysBridgeRateLimitReceiveFlood
This object limits the number of frames forwarded that would normally be flooded by this port over a 1 second interval. The value is set across all ports on the device.
a3ComSysBridgeAddressLearnMode
This object determins the behavior of address management normal(1) - The device will learn dynamic addresses and static entries can be added. secure(2) - Static, management, and control addresses can be added to a database. If a dynamic address is seen t ...
a3ComSysBridgeAddressAgingInterval
This object determines how long (in seconds) a dynamic entry is kept in the database.
a3ComSysBridgeLoopDetectMode
This object determines the behavior of loop detection enabled(1) - The DA will detect loops and disable the apporiate port. disabled(2) - No loop detection mechanism will be enabled. immediate(3) - If a BPDU is received on a front panel port then a fro ...
a3ComSysBridgeLoopDetectSrcAddress
This object returns the source address that is used to determine if a loop is present between client ports
a3ComSysBridgePortTable
A list of bridge port entries. A single entry exists in this list for each bridge port managed by this agent.
a3ComSysBridgePortEntry
A bridge port entry contains information about a particular bridge port managed by this agent.
a3ComSysBridgePortBridgeIndex
The index of the bridge identified by this entry, relative to this agent.
a3ComSysBridgePortIndex
The index of the bridge port identified by this entry, within the bridge identified by this entry.
a3ComSysBridgePortIfIndex
The value of the MIB-II ifIndex corresponding to the bridge port identified by this entry.
a3ComSysBridgePortReceiveMulticastLimit
This variable limits the number of multicast frames forwarded by this port over a 1 second interval. The minimum threshold limit may vary between platforms, but can be determined by multiplying this value by the swSysBridgePortReceiveMulticastLimitMultip ...
a3ComSysBridgePortAddressAction
This object, when read, always returns the value other(1). The behavior of setting this object to each of the acceptable values is as follows: freezeAddress: causes all the learned dynamic addresses to be converted into static addresses. flushAddress: ...
a3ComSysBridgePortSpanningTreeFrameReceivedCounts
The number of spanning tree frames received by the bridge port identified by this entry.
a3ComSysBridgePortReceiveBlockedDiscards
The number of frames discarded by the bridge port identified by this entry because the receiving bridge port was not in the 'forwarding' state.
a3ComSysBridgePortReceiveMulticastLimitExceededs
The number of times the value of a3ComSysBridgePortReceiveMulticastLimit was exceeded for the port identified by this entry.
a3ComSysBridgePortReceiveMulticastLimitExceededDiscards
The number of multicast/broadcast frames discarded by the bridge port identified by this entry because the corresponding value of a3ComSysBridgePortReceiveMulticastLimit was exceeded.
a3ComSysBridgePortReceiveSecurityDiscards
The number of frames discarded by the bridge port identified by this entry because they contained source addresses which were statically configured on another bridge port. A statically configured address (station), which is not allowed to move, appears t ...
a3ComSysBridgePortReceiveUnknownDiscards
The number of frames discarded by the bridge port identified by this entry because the destination address was unknown. Note that this counter is only valid for backbone ports, and only when the bridge is operating in express mode.
a3ComSysBridgePortReceiveOtherDiscards
The number of frames discarded by the bridge port identified by this entry because they contained either invalid (group) source addresses or source addresses belonging to this bridge (indicative of network loops).
a3ComSysBridgePortReceiveErrorDiscards
The number of frames discarded by the bridge port identified by this entry because of internal bridge system errors (e.g., hardware and software address table discrepencies).
a3ComSysBridgePortSameSegmentDiscards
The number of frames discarded by the bridge port identified by this entry because the destination address is known on the same network segment as the source address, i.e., the frame does not need to be bridged.
a3ComSysBridgePortTransmitBlockedDiscards
The number of frames discarded by the bridge port identified by this entry because the transmitting bridge port was not in the 'forwarding' state.
a3ComSysBridgePortReceiveAllPathFilteredFrames
The number of frames discarded by the bridge port identified by this entry due to user defined receive all path filters.
a3ComSysBridgePortReceiveMulticastPathFilteredFrames
The number of frames discarded by the bridge port identified by this entry due to user defined receive multicast path filters.
a3ComSysBridgePortTransmitAllPathFilteredFrames
The number of frames discarded by the bridge port identified by this entry due to user defined transmit all path filters.
a3ComSysBridgePortTransmitMulticastPathFilteredFrames
The number of frames discarded by the bridge port identified by this entry due to user defined transmit multicast path filters.
a3ComSysBridgePortForwardedUnicastFrames
The number of unicast frames which this port forwarded to a single destination port.
a3ComSysBridgePortForwardedUnicastOctets
The number of octets contained in unicast frames which this port forwarded to a single destination port.
a3ComSysBridgePortForwardedMulticastFrames
The number of multicast frames which this port forwarded.
a3ComSysBridgePortForwardedMulticastOctets
The number of octets contained in multicast frames which this port forwarded.
a3ComSysBridgePortFloodedUnicastFrames
The number of unicast frames which this port flooded to all other ports in the bridge.
a3ComSysBridgePortFloodedUnicastOctets
The number of octets contained in unicast frames which this port flooded to all other ports in the bridge.
a3ComSysBridgePortStpMode
The mode of the bridge port.
a3ComSysBridgePortReceiveMulticastLimitFrameType
This object identifies the frames type(s) that are to be counted when determining if the receive multicast limit has been exceeded for this bridge port. Devices attached to networks with predominantly high multicast traffic (e.g. video) should set this v ...
a3ComSysBridgePortForwardedFrames
The number of frames which this port forwarded.
a3ComSysBridgePortReceiveMulticastLimitMultiplier
This variable determines the minimum setting for the multicast limit threshold. For example if this value equals 1000, and the a3ComSysBridgePortReceiveMulticastLimit variable equals 2 then no more than 2000 multicast frames per second will be forwarded ...
a3ComSysBridgePortRateLimitReceiveMulticastEnabled
This object determines whether a port participates in multicast rate limiting set by the object a3ComSysBridgeRateLimitReceiveMulticast
a3ComSysBridgePortRateLimitReceiveBroadcastEnabled
This object determines whether a port participates in broadcast rate limiting set by the object a3ComSysBridgeRateLimitReceiveBroadcast
a3ComSysBridgePortRateLimitReceiveFloodEnabled
This object determines whether a port participates in flood rate limiting set by the object a3ComSysBridgeRateLimitReceiveFlood
a3ComSysBridgePortRateLimitReceiveState
This object returns the bmfrl state of the port enabled(1) - port is up disabled(2) - port is down, but not as a result of BMFRL bmfrl-disabled(3) - port was disabled by rate limit software
a3ComSysBridgePortLoopDetectState
This object returns a reason code that will indicate why a given port was disable by the Loop Detection software.
a3ComSysBridgePortAddressMaxLimit
This object controls the maximum number of unicast addresses that can be learned or configured on a port. This value is set on a per port basis. The value can't be set lower than the current number of addresses on a port.
a3ComSysBridgePortAddressState
This object returns a reason code that will indicate why a given port was disable, when a3ComDaAddressMode is set to secure.
a3ComSysBridgePortReceiveInternalPathFilteredFrames
The number of frames discarded by the bridge port identified by this entry due to receive internal path filters.
a3ComSysBridgePortAddressTable
A list of bridge port address information. A single entry exists in this list for each learned address, accross all bridge ports and all bridges managed by this agent.
a3ComSysBridgePortAddressEntry
An bridge port address entry contains information about a particular bridge port address. To create a new entry, set an instance of a3ComSysBridgePortAddressRemoteAddress with the address index portion of the instance set to 0, to a valid value. To remo ...
a3ComSysBridgePortAddressBridgeIndex
The index of the bridge identified by this entry, relative to this agent.
a3ComSysBridgePortAddressPortIndex
The index of the bridge port identified by this entry, within the bridge identified by this entry.
a3ComSysBridgePortAddressIndex
The index of this address entry within the bridge address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of a3ComSysBridgeAddressTableSize.
a3ComSysBridgePortAddressRemoteAddress
The remote MAC address detected on the bridge port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgePortAddressIndex is determined automatically internal to the b ...
a3ComSysBridgePortAddressType
This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table.
a3ComSysBridgePortAddressIsStatic
A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations.
a3ComSysBridgePortAddressStaticPort
If the corresponding value of the object a3ComSysBridgePortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC was statically configured. If the object ...
a3ComSysBridgePortAddressAge
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge port identified by this entry.
a3ComSysBridgeVlanPortAddressTable
A list of vlan bridge port address information. A single entry exists in this list for each learned address, across all vlan bridge ports and all vlan bridges managed by this agent.
a3ComSysBridgeVlanPortAddressEntry
A bridge vlan port address entry contains information about a particular bridge vlan port address. To create a new entry, set an instance of a3ComSysBridgeVlanPortAddressRemoteAddress with the address index portion of the instance set to 0, to a valid va ...
a3ComSysBridgeVlanPortAddressBridgeIndex
The index of the bridge vlan identified by this entry, relative to this agent.
a3ComSysBridgeVlanPortAddressVlanIndex
The index of the vlan identified by this entry, within the bridge identified by this entry.
a3ComSysBridgeVlanPortAddressPortIndex
The index of the bridge vlan port identified by this entry, within the bridge vlan identified by this entry.
a3ComSysBridgeVlanPortAddressIndex
The index of this address entry within the bridge vlan address table for the bridge identified by this entry. This index ranges from 1 to the corresponding value of a3ComSysBridgeAddressTableSize.
a3ComSysBridgeVlanPortAddressRemoteAddress
The remote MAC address detected on the bridge vlan port identified by to this entry. Setting this object results in an attempt to create a new entry in the table. Since the value of a3ComSysBridgeVlanPortAddressIndex is determined automatically internal ...
a3ComSysBridgeVlanPortAddressType
This object, when read, always returns the value valid(1). Setting this object to invalid(2) will remove the corresponding address entry from the table.
a3ComSysBridgeVlanPortAddressIsStatic
A value indicating whether this MAC address was statically configured or was dynamically learned. Note that isStatic(1) is only valid for set operations.
a3ComSysBridgeVlanPortAddressStaticPort
If the corresponding value of the object a3ComSysBridgeVlanPortAddressIsStatic is isStatic(1), this object indicates the local bridge port index (as reported by a3ComSysBridgePortLocalIndex) for which this address MAC was statically configured. If the ob ...
a3ComSysBridgeVlanPortAddressAge
This object indicates the time, in seconds, elapsed since a packet containing this address as a source was last seen on the bridge vlan port identified by this entry.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list