ctron-ssr-capacity-mib

ctron-ssr-capacity-mib Download

MIBs list

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ctron-ssr-capacity-mib .

OID list for ctron-ssr-capacity-mib

capChassisSlotCount
The maximum number of slots in the chassis, including the slot for the CPU module.
capChassisSlotsUsed
The number of slots used in the chassis. This number includes the slot used for the CPU module, if any.
capChassisSlotsFree
The number of free slots in the chassis. This includes all of the available slots not used by the CPU or redundant CPU card.
capChassisCPURedundancy
The chassis CPU redundancy capability of the SSR. This will be one of the following values: noSupport(1) -- feature not supported available(2) -- feature not in use enabled(3) -- feature in use and enabled disabled(4) -- feature in use and dis ...
capCPUEntry
An entry containing CPU statistics information.
capCPUModuleIndex
The Slot index in which the current CPU is residing.
capCPUCurrentUtilization
The CPU utilization expressed as an integer percentage. This is calculated over the last 5 seconds at a 0.1 second interval as a simple average.
capCPUL3Learned
The total number of new layer 3 flows the CPU has processed and programmed into the Layer 3 hardware flow tables. Layer 3 flows are packets for IP or IPX protocols that will be routed from one subnet to another. Bridged flows or IP and IPX flows that orig ...
capCPUL3Aged
The total number of Layer 3flows that have been removed from the layer 3 hardware flow tables across all modules by the Layer 3 aging task. This number may increase quickly if routing protocols are not stable. Removal or insertion of routes into the forwa ...
capCPUL2Learned
The number of L2 flows or addresses learned. The intended result here is to see how many stations attempt to establish switched communication through the SSR.
capCPUL2Aged
The total number of L2 addresses or flows aged out. Hosts that end switched communication through the SSR are aged out every 15 seconds.
capCPUNIAReceived
The total number of packets received by the NIA chip. This is useful in gauging how many packets are forwarded to the CPU for processing.
capCPUNIATransmitted
The total number of packets transmitted by the NIA chip. This is useful in seeing how much the CPU is communicating directory with management stations and other routers.
capCPUMinThreshold
The CPU utilization expressed as an integer percentage. This value represents the threshold minimum value for capCPUCurrentUtilization that is used to reset the threshold testing for generation of the envCPUThresholdTrap. This value is equal to 0 by defau ...
capCPUMaxThreshold
The CPU utilization expressed as an integer percentage. This value represents the threshold maximum for capCPUCurrentUtilization which causes generation of the envCPUThresholdTrap. Another trap is not generated until the capCPUCurrentUtilization value has ...
capTaskTable
A summary of the tasks running on a CPU enabled module in the chassis.
capTaskEntry
An entry containing information on a task running on a CPU enabled module in the chassis including the memory consumption and current status.
capTaskModuleIndex
The module index on which the task is running.
capTaskIndex
A unique index assigned to a task instance. This index is unique to the task for the time SSR is booted. If the task is terminated, the index will not be reused for another task that might become active in the system.
capTaskName
The encrypted name assigned to this task. This is unique for each different type of task, but there may be multiple instances of the same task running in the system.
capTaskShed
The number of times this task has been scheduled to run. This is a cumulative count from the time the SSR was started.
capTaskStatus
The current status of this task.
capTaskUsed
The size of the memory consumed by this task. This can be used to monitor any excess memory use by a particular task and is expressed in bytes.
capMemoryTable
A summary of the non-volatile storage devices in the SSR.
capMemoryEntry
An entry containing information on a non-volatile memory device in the SSR.
capMemoryType
A type of storage device from the enumerated memory types.
capMemoryIndex
An index or enumeration for the entries of a particular memory type. This index corresponds to: -- Interface index for L2Hardware Type -- Module index for L3Hardware Type -- Enumeration for everything else.
capMemoryDescr
The description of the memory device.
capMemorySize
Memory device total memory capacity expressed in blocks.
capMemoryFree
Memory device free memory in blocks. This will include any unused memory between used memory blocks and is calculated by subtracting the memory used from the size of the memory device.
capMemoryUsed
Size of used memory on the memory device. This includes the blocks of memory that are only partially used and is expressed in blocks.
capMemoryBlockSize
Size of the memory blocks on the memory device. This is the minimum block size of memory returned when memory is requested and is expressed in bytes.
capMemoryFailures
The number of times a memory allocation in this memory device has failed. In the case of L2Hardware and L3Hardware types it expresses the number of times a Full Hash Bucket condition has been met.
capMemoryRemovable
Indicates if the memory type is removable.
capConfGroupV10
A set of managed objects that make up version 1.0 of the SSR capacity mib.
capConfGroupV20
A set of managed objects that make up version 2.0 of the SSR capacity mib.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list