ctron-sfps-vlan-mib Download
You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the
ctron-sfps-vlan-mib
.
OID list for ctron-sfps-vlan-mib
- sfpsVAPIVerb
- Specifies the action to be initiated as a result of setting this leaf.
- sfpsVAPIInPort
- Specifies the ingress port of the Virtual LAN if mapping a connection. Specifies the source port of a user when mapping a user
- sfpsVAPIVlanName
- Specifies the Virtual LAN ID.
- sfpsVAPIOutPort
- Specifies the egress port of the Virtual LAN if mapping a connection.
- sfpsVAPIUserMAC
- Specifies the actual user's MAC value for the action.
- sfpsVAPIUserAliasTag
- Indicates the Alias Value of the user. Not yet supported.
- sfpsVAPIUserAlias
- Indicates the Alias Value of the user.
- sfpsVAPIAdminStatus
- Sets the administrative state of the object.
- sfpsVAPIAutoRegisterRule
- Specifies the AMR rule in which to perform the action on.
- sfpsVAPIAutoRegMask
- Indicates the mask to apply when the IP-Subnet rule is invoked.
- sfpsVAPIAutoRegValue
- Indicates the Alias Value of the user.
- sfpsVAPIUnicastPolicy
- Sets the vlan policy type.
- sfpsVAPIPortPolicy
- Sets the port mode type.
- sfpsVAPIFloodPolicy
- Sets the flood mode type.
- sfpsVAPIRouterPort
- Sets router port
- sfpsVAPIVlanId
- Indicates the Vlan Id.
- sfpsVAPINvramId
- Indicates the Nvram Id
- sfpsVAPIRelayAgent
- Indicates the Relay Agent.
- sfpsVAPILayer3Learning
- Indicates layer 3 learning enabled/disabled
- vlanNameTable
- This table contains information of each SFVlan instance. Essentially, a separate SFVlan instance exists for each Vlan. If SFVlan is not configured on a module, than an entry will not exist.
- vlanNameEntry
- Each entry specifies the configuration for the Vlan instance.
- vlanNameNHash
- The primary index to the VlanName table.
- vlanNameIndex
- The secondary index to the VlanName table.
- vlanNameVlanName
- The Virual LAN ID.
- vlanNameAdminStatus
- The administrative state of the Vlan.
- vlanNameOperStatus
- The operational state of the Vlan.
- vlanNameUniPolicy
- The communication policy with respect to other Vlans.
- vlanNameFloodPolicy
- The multicast and unknown destination flood policy.
- vlanNameStatusTime
- The amount of time that this Vlan has been in its current operational state.
- vlanNameNumUsers
- The number of users per port
- vlanNameEnabledPorts
- The list of ports which have are enabled for this Vlan.
- vlanNameMappedPorts
- The list of ports which have this Vlan mapped to it.
- vlanNameVlanRule
- .
- vlanNameFloodPorts
- vlanNameVlanId
- vlanNameRelayAgent
- vlanSystemTable
- This table contains the configuration and administrative information of each SFVlan switch instance. Essentially, a separate SFVlan switch instance exists for each switch module. If SFVlan is not configured on a module, than an entry will not exist.
- vlanSystemEntry
- Each entry specifies the VLAN configuration for the VLAN instance.
- vlanSystemSwitchInstance
- The primary index to the VLAN switch table. This identifies the VLAN switch for which the entry exists.
- vlanSystemAdminStatus
- Sets the administrative state of the VLAN switching services for this VLAN instance. This controls the VLAN state at a module level. Regardless of the per-port state of each VLAN switching port and the state of active connections, writing the value disa ...
- vlanSystemAdminReset
- Resets this VLAN switch instance. Writing a vlue of reset(2) will force a soft restart of the VLAN without any graceful shutdown. Any active connections or services will be interrupted.
- vlanSystemOperStatus
- Indicates the current operating condition of the VLAN instance.
- vlanSystemOperTime
- Indicates the amount of time (# of time ticks) that this VLAN switch instance has been in its current operational state.
- vlanSystemLastChange
- Indicates the last time a change was made to the configuration entry for this VLAN switch instance.
- vlanSystemVersion
- Indicates the current revision level of the VLAN firmware for this VLAN switch instance.
- vlanSystemMibRev
- Indicates in textual format the current revision level of the Cabletron VLAN MIB implemeted by the agent for this VLAN switch instance.
- vlanSystemAgentIP
- IP Address of VLAN Manager who owns this switch.
- vlanSystemDomainName
- Indicates domain name
- vlanSystemPollCount
- Number of polls
- vlanSystemFirstPollTime
- System time when first polled
- vlanSystemLastPollTime
- Last time polled
- vlanSystemPriorPollTime
- Poll time one before the last poll time
- vlanSystemDeltaPollTime
- Time difference between last poll time and prior poll time
- vlanTestAPIVerb
- Specifies the action to be initiated as a result of setting this leaf.
- vlanTestAPIVlanName
- Specifies the Virtual LAN to be acted upon.
- vlanTestAPIPort
- Specifies the Port to be acted upon.
- vlanTestAPIVlanId
- Specifies the ID.
- vlanTestAPIOutputTable
- This table contains the output results of the VlanAPI action.
- vlanTestAPIOutputEntry
- Each entry specifies one output result of the VlanAPI action.
- vlanTestAPIOutputIndex
- The primary index to the VLAN Test API Output table.
- vlanTestAPIOutputVlanName
- Specifies the Virtual LAN by name.
- vlanTestAPIOutputUserCnt
- Specifies the number of users on this Vlan.
- vlanTestAPIOutputStatus
- Specifies the operational state of this Vlan.
- vlanTestAPIOutputPolicy
- Specifies the uni-cast policy of this Vlan.
- vlanTestAPIOutputPort
- Specifies the Vlan port.
- vlanTestAPIOutputMap
- Specifies whether the Vlan is mapped.
- vlanTestAPIOutputAble
- Specifies whether the Vlan is enabled.
- vlanTestAPIOutputTap
- Specifies whether the Vlan is tapped.
- vlanTestAPIOutputVlanId
- Specifies the Vlan Id.
- vlanCountAPITotal
- vlanCountAPIAdmin
- vlanCountAPIAutoreg
- vlanAMRRulesTable
- This table displays the on/off status of each individual AMR Rule.
- vlanAMRRulesEntry
- vlanAMRRulesRule
- Refers to the enumerated value corresponding to each AMR rule
- vlanAMRRulesStatus
- Displays whether the rule is currently on or off
- vlanAMRStatsNumRulesEnabled
- Refers to the number of rules that are on in the AmrRules
- vlanAMRStatsSingleMask
- Displays the mask that is used with the IP-Subnet AMR rule
- vlanAMRSubnetsPrefix
- vlanAMRSubnetsMask
- vlanPortTable
- vlanPortEntry
- vlanPortPortNum
- The primary index to the VlanPort table.
- vlanPortPortStatus
- vlanPortPortPolicy
- vlanPortVlanName
- vlanPortAdminStatus
- vlanPortUniPolicy
- vlanPortFloodPolicy
- vlanPortRouterPort
- vlanPortVlanId
- vlanPortRelayAgent
- vlanPortLayer3Learning
You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
