ctron-sfps-l4ss-mib

ctron-sfps-l4ss-mib Download

MIBs list

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ctron-sfps-l4ss-mib .

OID list for ctron-sfps-l4ss-mib

sfpsL4CPDisableTCPAckCheck
This variable indicates whether or not TCP segments whose ACK bit is off are allowed to use an existing flow table entry. When set to 2, a TCP segment whose ACK bit is off is always treated as an exception packet. This variable takes effect immediately, ...
sfpsL4CPFlowTable
This table describes each conversation between a pair or Layer 3 or Layer 4 endpoints.
sfpsL4CPFlowEntry
Each entry contains statistics and information for a pair of Layer 3 or Layer 4 endpoints.
sfpsL4CPFlowCnxIndex
Index (1-based) of the SFPSGAPI connection table entry to which this flow belongs.
sfpsL4CPFlowSecL3Address
The Layer 3 address of the secondary endpoint for this flow. The secondary endpoint is the one having the higher MAC address.
sfpsL4CPFlowPrimL3Address
The Layer 3 address of the primary endpoint for this flow. The primary endpoint is the one having the lower MAC address.
sfpsL4CPFlowSubprotocol
This value identifies the Layer 4 protocol. It corresponds to the IP 'Protocol' field as described in the 'Assigned Numbers' RFC.
sfpsL4CPFlowSecMatchAnyDyn
If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the secondary endpoint should be treated as a wildcard, able to match any port number above 1023.
sfpsL4CPFlowPrimMatchAnyDyn
If this is a TCP or UDP entry, this value specifies whether or not the protocol port of the primary endpoint should be treated as a wildcard, able to match any port number above 1023.
sfpsL4CPFlowSecProtPort
If this is a TCP or UDP entry, this value indicates the protocol port number of the secondary endpoint. Otherwise, this field is zero.
sfpsL4CPFlowPrimProtPort
If this is a TCP or UDP entry, this value indicates the protocol port number of the primary endpoint. Otherwise, this field is zero.
sfpsL4CPFlowSecSubstApplies
Indication of whether or not MAC address substitution applies to the secondary endpoint for this flow.
sfpsL4CPFlowPrimSubstApplies
Indication of whether or not MAC address substitution applies to the primary endpoint for this flow.
sfpsL4CPFlowSecInPkts
Count of packets transmitted from primary to secondary.
sfpsL4CPFlowSecInOctets
Count of octets transmitted from primary to secondary.
sfpsL4CPFlowPrimInPkts
Count of packets transmitted from secondary to primary.
sfpsL4CPFlowPrimInOctets
Count of octets transmitted from secondary to primary.
sfpsL4CPFlowFlowAge
Time elapsed since this entry was created.
sfpsL4CPFlowFlowLastUse
Time elapsed since this entry was last used to send data.
sfpsL4CPFlowID
The Call Detail Recording flow ID for this flow, or zero if CDR is not active for the flow.
sfpsL4CPMACAddrSubTable
This table provides the ability to override the default gateway for specific routes.
sfpsL4CPMACAddrSubEntry
Each entry contains the MAC address substitution information associated with a specific destination IP address.
sfpsL4CPMACAddrSubDestIP
Destination IP address for this route
sfpsL4CPMACAddrSubNextHopMAC
The next-hop MAC address to use for this route.
sfpsL4CPMACAddrSubRefCount
The number of flow table entries that reference this entry.
sfpsL4CPNetAddrUserTable
This table associates user information with network addresses.
sfpsL4CPNetAddrUserEntry
Each entry contains the user information associated with a specific network address.
sfpsL4CPNetAddrUserProtocol
The network-layer protocol associated with this entry. Values correspond to the 'aoAddressTag' enumeration (see aoproperties.h).
sfpsL4CPNetAddrUserNetAddr
The network-layer address associated with this entry.
sfpsL4CPNetAddrUserLoginID
The login ID from CSM's LoginOID. Set to zero if no user is logged into the address.
sfpsL4CPNetAddrUserUserID
The object ID from CSM's UserOID.
sfpsL4CPNetAddrUserUserName
The user name associated with this entry.
sfpsL4CPIPRouteTable
This table associates IP routes (subnets) with devices.
sfpsL4CPIPRouteEntry
Each entry contains the IP route information associated with a specific device.
sfpsL4CPIPRouteSubnetMask
The subnet mask associated with this route.
sfpsL4CPIPRouteSubnet
The destination subnet of this route.
sfpsL4CPIPRouteRouteID
The object ID from CSM's RouteOID.
sfpsL4CPIPRouteRouteSubsystem
Indicates type of device route.
sfpsL4CPIPRouteDeviceID
The object ID from CSM's DeviceOID.
sfpsL4CPIPRouteDeviceName
The device name for this route.
sfpsL4CPIPRouteMACAddress
The MAC address of the device for this route.
sfpsL4CPIPRouteMetric
The metric associated with this route.
sfpsL4CPIPRouteCallable
Indicates whether or not the device associated with this route is callable for IP.
sfpsL4CPPortTable
This table lists the attributes of an access servers ports.
sfpsL4CPPortEntry
Each entry contains information about one of this access server's ports.
sfpsL4CPPortNum
The logical port number of this port.
sfpsL4CPPortID
The last four octets of CSM's PortOID for this port.
sfpsL4CPPortApplyPolicyIn
Indicates whether or not access policies are to be applied to packets arriving at this port.
sfpsL4CPPortApplyPolicyOut
Indicates whether or not access policies are to be applied to packets sent out this port.
sfpsL4CPPortDefaultUserID
The last four octets of CSM's UserOID for the default userid for this port.
sfpsL4CPPortDefaultUserName
The user name assigned to MAC addresses discovered on this port.
sfpsL4CPCallableDeviceTable
This table lists the attributes of a callable device.
sfpsL4CPCallableDeviceEntry
Each entry contains information about one of this access server's ports.
sfpsL4CPCallableDeviceDeviceID
The last four octets of CSM's DeviceOID for this callable device.
sfpsL4CPCallableDeviceDeviceName
The default device name for this callable device.
sfpsL4CPCallableDeviceDefaultUserName
The default user name for this callable device.
sfpsL4CDRActiveFlowTable
This table lists the currently active flows that have Call Detail Recording enabled.
sfpsL4CDRActiveFlowEntry
Each entry contains information about one flow that has CDR enabled.
sfpsL4CDRActiveFlowFlowID
Flow ID for this flow.
sfpsL4CDRActiveFlowSubProtocol
If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero.
sfpsL4CDRActiveFlowEtherType
The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC.
sfpsL4CDRActiveFlowSourceUser
The user name associated with the source of the flow.
sfpsL4CDRActiveFlowSourceMACAddr
The MAC address associated with the source of the flow.
sfpsL4CDRActiveFlowSourceNetAddr
The Layer 3 address associated with the source of the flow.
sfpsL4CDRActiveFlowSourceProtocolPort
If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero.
sfpsL4CDRActiveFlowSourcePPRangeEnabled
Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created.
sfpsL4CDRActiveFlowSourceConnNumber
The source connection number.
sfpsL4CDRActiveFlowDestUser
The user name associated with the destination of the flow.
sfpsL4CDRActiveFlowDestMACAddr
The MAC address associated with the destination of the flow.
sfpsL4CDRActiveFlowDestNetAddr
The Layer 3 address associated with the destination of the flow.
sfpsL4CDRActiveFlowDestProtocolPort
If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero.
sfpsL4CDRActiveFlowDestPPRangeEnabled
Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created.
sfpsL4CDRActiveFlowDestConnNumber
The destination connection number.
sfpsL4CDRActiveFlowStartTime
The time elapsed since this flow was created.
sfpsL4CDRActiveFlowLastPktTime
The time elapsed since the most recent packet was sent on this flow.
sfpsL4CDRActiveFlowEndTime
The time elapsed since this flow was terminated. This field is not meaningful for active flows.
sfpsL4CDRActiveFlowInOctets
The number of octets that have been sent from the destination to the source.
sfpsL4CDRActiveFlowOutOctets
The number of octets that have been sent from the source to the destination.
sfpsL4CDRActiveFlowInPkts
The number of packets that have been sent from the destination to the source.
sfpsL4CDRActiveFlowOutPkts
The number of packets that have been sent from the source to the destination.
sfpsL4CDRActiveFlowDemandAccessConnMade
Indicates whether or not a demand access connection had to be made for this flow.
sfpsL4CDRActiveFlowFlowRecordState
Indicates the current state of the flow record.
sfpsL4CDRTermedFlowTable
This table lists the terminated flows that had Call Detail Recording enabled.
sfpsL4CDRTermedFlowEntry
Each entry contains information about one flow that had CDR enabled.
sfpsL4CDRTermedFlowFlowID
Flow ID for this flow.
sfpsL4CDRTermedFlowSubProtocol
If this is a Layer 4 flow, this value identifies the Layer 4 protocol (for IP, this value corresponds to the 'Protocol' field as described in the 'Assigned Numbers' RFC). If this is a Layer 3 flow, this value is zero.
sfpsL4CDRTermedFlowEtherType
The Layer 3 protocol represented by this entry. Values correspond to the 'Ether Type' field as described in the Assigned Numbers RFC.
sfpsL4CDRTermedFlowSourceUser
The user name associated with the source of the flow.
sfpsL4CDRTermedFlowSourceMACAddr
The MAC address associated with the source of the flow.
sfpsL4CDRTermedFlowSourceNetAddr
The Layer 3 address associated with the source of the flow.
sfpsL4CDRTermedFlowSourceProtocolPort
If this is a Layer 4 flow, this value indicates the protocol port number of the source of the flow. Otherwise, this field is zero.
sfpsL4CDRTermedFlowSourcePPRangeEnabled
Indicates whether or not any source protocol port number greater than 1023 is considered to match the source protocol port with which this flow was created.
sfpsL4CDRTermedFlowSourceConnNumber
The source connection number.
sfpsL4CDRTermedFlowDestUser
The user name associated with the destination of the flow.
sfpsL4CDRTermedFlowDestMACAddr
The MAC address associated with the destination of the flow.
sfpsL4CDRTermedFlowDestNetAddr
The Layer 3 address associated with the destination of the flow.
sfpsL4CDRTermedFlowDestProtocolPort
If this is a Layer 4 flow, this value indicates the protocol port number of the destination of the flow. Otherwise, this field is zero.
sfpsL4CDRTermedFlowDestPPRangeEnabled
Indicates whether or not any destination protocol port number greater than 1023 is considered to match the destination protocol port with which this flow was created.
sfpsL4CDRTermedFlowDestConnNumber
The destination connection number.
sfpsL4CDRTermedFlowStartTime
The time elapsed since this flow was created.
sfpsL4CDRTermedFlowLastPktTime
The time elapsed since the most recent packet was sent on this flow.
sfpsL4CDRTermedFlowEndTime
The time elapsed since this flow was terminated.
sfpsL4CDRTermedFlowInOctets
The number of octets that have been sent from the destination to the source.
sfpsL4CDRTermedFlowOutOctets
The number of octets that have been sent from the source to the destination.
sfpsL4CDRTermedFlowInPkts
The number of packets that have been sent from the destination to the source.
sfpsL4CDRTermedFlowOutPkts
The number of packets that have been sent from the source to the destination.
sfpsL4CDRTermedFlowDemandAccessConnMade
Indicates whether or not a demand access connection had to be made for this flow.
sfpsL4CDRTermedFlowFlowRecordState
Indicates the current state of the flow record.
sfpsL4CDRFlowIndexTable
This table lists the current flows that have Call Detail Recording enabled.
sfpsL4CDRFlowIndexEntry
Each entry contains information about one flow that has CDR enabled.
sfpsL4CDRFlowIndexFlowID
Flow ID for this flow.
sfpsL4CDRFlowIndexSFPSFlowTblIndex
Index of the SFPS Flow Table entry (1-based) that corresponds to this flow.
sfpsL4CDRFlowIndexSFlowStatsPtr
Pointer to the SFlowStats object for this flow.
sfpsL4CDRFlowIndexStaticFlowInfoPtr
Pointer to the L4CDRStaticFlowInfo object for this flow.
sfpsL4CDRFlowIndexFlowTblEntryPtr
The flow table entry pointer for this flow.
sfpsL4CDRFlowIndexFlowState
Indicates the current state of the flow index record.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list