ctron-sfps-esys-mib Download
You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the
ctron-sfps-esys-mib
.
OID list for ctron-sfps-esys-mib
- sfpsSysConfigTable
- This table contains the configuration and aministrative information of each SFPS instance. Essentially, a separate SFPS instance exists for each switch module. If SFPS is not configured on a module, than an entry will not exist.
- sfpsSysConfigEntry
- Each entry specifies the SFPS configuration for the SFPS instance.
- sfpsSysConfigSwitchInstance
- Switch Identifier to designate the instance of this entry.
- sfpsSysConfigAdminStatus
- The administrative status of the switch.
- sfpsSysConfigAdminReset
- Setting reset will cause a soft reset of the switch.
- sfpsSysConfigOperStatus
- Displays the operational status of the switch.
- sfpsSysConfigOperTime
- Displays the operation uptime of the switch.
- sfpsSysConfigLastChange
- Displays the number of time ticks since the last operational status change.
- sfpsSysConfigVersion
- Displays the version of this image.
- sfpsSysConfigMIBRev
- Displays the MIB version of the Engine component.
- sfpsSysConfigHostMgmtPort
- Displays the Host Management port.
- sfpsSysConfigHostCtrlPort
- Displays the logical port number for the Host Control Port. The Host Control Port is the port that unknown packets are sent to for call processing.
- sfpsSysConfigHostDataPort
- sfpsSysConfigHostCtrlThrottleCount
- sfpsSysConfigHostDataThrottleCount
- sfpsSysConfigTrunkSwitch
- sfpsSysConfigSwitchMode
- Displays the mode that the switch is running.
- sfpsSysConfigSwitchMAC
- Displays the Switch's Base MAC address.
- sfpsSysConfigMgmtAccessType
- Determines whether the port can be used for management only or to be also used as an Access port.
- sfpsSysConfigChassisMAC
- sfpsSysConfigChassisIP
- sfpsSysStatsTable
- This table contains the statistics information fo each SFPS switch instance. Essentially, a separate SFPS instance exists for each switch module. If SFPS is not configured on a module, than an entry will not exist.
- sfpsSysStatsEntry
- Each entry contains the SFPS statistics for the SFPS instance.
- sfpsSysStatsSwitchInstance
- The primary index to the SFPS switch table. This identifies the SFPS switch for which the entry exists.
- sfpsSysStatsAdminStatus
- Sets the administrative state of the SFPS switch statistics. Writing a value of enabled(3) causes these counters to become active for this SFPS switch instance. Writing a value of disabled(2) causes these counters to become inactive for this SFPS switch ...
- sfpsSysStatsReset
- Resets the SFPS switch counters for this SFPS switch instance. Writing a value of reset(2) resets the SFPS switch counters to 0 and causes sfpsSysStatsOperTime to also be reset to 0.
- sfpsSysStatsOperTime
- Indicates the amount of time (# of time ticks) that the SFPS switch statistics have been active for this SFPS swtich instance.
- sfpsSysStatsInPkts
- Indicates the total number of SFPS packets that have been received, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsSysStatsOutPkts
- Indicates the total number of SFPS packets that have been switched, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsSysStatsDiscardPkts
- Indicates the total number of SFPS packets that have been discarded, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsSysStatsFilteredPkts
- Indicates the total number of SFPS packets that have been filtered, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsSysStatsInOctets
- Indicates the total number of SFPS octets that have been received, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsSysStatsOutOctets
- Indicates the total number of SFPS octets that have been switched, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsSysStatsDiscardOctets
- Indicates the total number of SFPS octets that have been discarded, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsSysStatsFilteredOctets
- Indicates the total number of SFPS octets that have been filtered, on this SFPS switch instance, during the time of sfpsSysStatsOperTime.
- sfpsVccPortTable
- sfpsVccPortEntry
- sfpsVccPortLogPort
- sfpsVccPortPhyPort
- sfpsVccPortVpi
- sfpsVccPortVci
- sfpsVccPortPortType
- sfpsVccPortLogPortType
- sfpsVccPortPhyLinkState
- sfpsATMResolveSystemLearnTableSize
- sfpsATMResolveCountersVerb
- sfpsATMResolveCountersUptime
- sfpsATMResolveCountersQueryMACReq
- sfpsATMResolveCountersQueryMACFail
- sfpsATMResolveCountersQueryMACGood
- sfpsATMResolveCountersQueryMACDaSaChecks
- sfpsATMResolveCountersQueryMACDaSaHits
- sfpsATMResolveCountersQueryMACDaSaMissess
- sfpsATMResolveCountersQueryMACVdirChecks
- sfpsATMResolveCountersQueryMACVdirHits
- sfpsATMResolveCountersQueryMACVdirMisses
- sfpsATMResolveCountersQueryMACErrors
- sfpsATMResolveCountersQueryMACLecPortSuppress
- sfpsATMResolveCountersQueryMACStandbyDrops
- sfpsATMResolveCountersQueryDaSaRequests
- sfpsATMResolveCountersQueryDaSaHits
- sfpsATMResolveCountersQueryDaSaMisses
- sfpsATMResolveCountersQueryDaSaErrors
- sfpsATMResolveDiagAPIVerb
- sfpsATMResolveDiagAPIInDA
- sfpsATMResolveDiagAPIInSA
- sfpsATMResolveDiagAPIInSrcLecPort
- sfpsATMResolveDiagAPIOutStatus
- sfpsATMResolveDiagAPIOutPort
- sfpsPoolTable
- sfpsPoolTableEntry
- sfpsPoolTableIndex
- sfpsPoolTableName
- sfpsPoolTableRAM
- sfpsPoolTableBlockSize
- sfpsPoolTableBlockCount
- sfpsPoolTableBlockMax
- sfpsPoolTableObjSize
- sfpsPoolTableObjInUse
- sfpsPoolTableObjMax
- sfpsPoolTableObjInBlock
- sfpsAnibIfoStatsTable
- sfpsAnibIfoStatsTableEntry
- sfpsAnibIfoStatsPhysIntf
- sfpsAnibIfoStatsCtrlMessages
- sfpsAnibIfoStatsIlmiMessages
- sfpsAnibIfoStatsUniMessages
- sfpsAnibIfoStatsLaneMessages
- sfpsAnibIfoStatsPCSPoolSize
- sfpsAnibIfoStatsPCSPoolDrops
- sfpsAnibIfoStatsPoolIlmiDrops
- sfpsAnibIfoStatsPoolUniDrops
- sfpsAnibIfoStatsPoolLaneDrops
- sfpsAnibIfoStatsPCSAvail
- sfpsAnibIfoStatsPCSInUse
- sfpsAnibIfoStatsStandbyLeArpsDrops
- sfpsAnibIfoStatsStandbyUnknownsDrops
- sfpsAnibIfoStatsStandbyANIBUnknownsDrops
- sfpsMemHeapStatsHeapInit
- sfpsMemHeapStatsHeapMax
- sfpsMemHeapStatsHeapEnd
- sfpsMemHeapStatsHeapSize
- sfpsMemHeapStatsFragCount
- sfpsMemHeapStatsFragLargest
- sfpsMemHeapStatsFragBytes
- sfpsMemHeapStatsHeapUsed
- sfpsMemHeapStatsHeapAvail
- sfpsMemHeapStatsHeapUseMax
- sfpsMemHeapStatsHeapUsePercent
- sfpsATMPortsTable
- sfpsATMPortsTableEntry
- sfpsATMPortsPhysIntf
- sfpsATMPortsTotalLECPorts
- sfpsATMPortsTotalPVCPorts
- sfpsATMPortsTotalSVCPorts
- sfpsATMPortsBaseIntfNum
- sfpsATMPortsInUse
- sfpsATMPortsMgrVerb
- sfpsATMPortsMgrPhysIntf
- sfpsATMPortsMgrTotalLECPorts
- sfpsATMPortsMgrTotalPVCPorts
- sfpsATMPortsMgrTotalSVCPorts
- sfpsATMPortsMgrVerbStatus
- sfpsATMLecPortTable
- sfpsATMLecPortTableEntry
- sfpsATMLecPortLogPort
- sfpsATMLecPortPhyPort
- sfpsATMLecPortElanName
- sfpsATMLecPortPhyLinkState
- sfpsATMLecPortLECType
- sfpsATMSvcHistoryEventTable
- sfpsATMSvcHistoryEventTableEntry
- sfpsATMSvcHistoryEventIndex
- incrementing value based on number of events
- sfpsATMSvcHistoryEventATMAddr
- the atm address for the port manager port based on the lec client mib.
- sfpsATMSvcHistoryEventPortNumber
- port manager port
- sfpsATMSvcHistoryEventEvent
- state change logged to the Event Log
- sfpsATMSvcHistoryEventEventChange
- reason for the Event
- sfpsATMSvcHistoryEventVccHand
- value associated with a connection on Port Number
- sfpsATMSvcHistoryEventVpi
- vpi associated with connection on Port Number
- sfpsATMSvcHistoryEventVci
- vci associated with connection on Port Number
- sfpsATMSvcHistoryEventTime
- system time when Event occurs
- sfpsATMSvcHistoryMgrVerb
- allows you to reset the SvcHistoryEvent table disable logging so no new entries are compiled in the SvcHistoryEvent table enable logging so new entries are added to the SvcHistoryEvent table enable logging in the SvcHistoryEvent table so that when the max ...
- sfpsATMSvcHistoryMgrSvcHistoryWraps
- displays if the table is going to wrap
- sfpsATMSvcHistoryMgrLogState
- displays whether the table is enabled to log new entries or not and if it is enabled whether the table will wrap
- sfpsATMSvcHistoryMgrEntriesCount
- displays the number of current entries from the beginnning of the table (not from before it wrapped)
You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now.
Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access.
The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.
