ctron-environment-mib

ctron-environment-mib Download

MIBs list

You can select a variable to monitor using the built-in IPHost MIB browser that provides you with all variables, their current values and descriptions taken from the ctron-environment-mib .

OID list for ctron-environment-mib

chEnvAmbientTemp
The ambient temperature of the room in which the chassis is located. If this sensor is broken or not supported, then this object will be set to zero. The value of this object is the actual temperature in degrees Fahrenheit * 10.
chEnvAmbientStatus
This object reflects the status of the ambient temperature reading.
chEnvHumidity
The humidity value of the air flowing thru the chassis. The value of this object is the actual humidity * 10.
chEnvHumidityStatus
This object reflects the status of the ambient humidity reading.
chEnvAmbientHot
The temperature value above which the ambient temperature is deemed to be hot.
chEnvAmbientWarm
The temperature value above which the ambient temperature is deemed to be warm, if it is below or equal the hot value.
chEnvAmbientCool
The temperature value below which the ambient temperature is deemed to be cool, if it is above or equal the cold value.
chEnvAmbientCold
The temperature value below which the ambient temperature is deemed to be cold.
chEnvHumidityMoist
The humidity value above which the chassis humidity is deemed to be moist.
chEnvHumidityDry
The humidity value below which the chassis humidity is deemed to be a static risk.
chEnvNumFans
Number of fans in a chassis.
chEnvFanTable
A list of fans installed in this chassis.
chEnvFanEntry
A slot entry containing objects for a particular module.
chEnvFanID
A unique value, in the range between 1 and and the value of chEnvNumFans.
chEnvFanStatus
This object reflects the status of the chassis fan.
chEnvFanAdmin
This object is used to select the operational mode of the fan. If the value is set to 1 (auto) then fan speed is based on temperature. If the value is set to 3 (testing) then value will return to it's previous value prior to being set at 3.
chEnvFanSpeed
The fan speed expressed as a percentage of the maximum fan speed.
boardEnvSlotTable
A list of networking modules installed in this chassis.
boardEnvSlotEntry
A slot entry containing objects for a particular module.
boardEnvSlotID
The slot number of a chassis slot in which this board is installed. This object is similiar to chSlotID in the Chassis MIB.
boardEnvTemp
The temperature of the networking board. If this sensor is broken or not supported, then this object will be set to zero. The temperature is in degrees Fahrenheit * 10.
boardEnvTempStatus
This object reflects the status of the board temperature reading.
boardEnvTempRelStatus
This object reflects the status of the board temperature reading relative to the ambient temperature.
boardEnvShutdownAdmin
This object enables or disables the auto shutdown due to a temperature condition.
boardEnvTempHot
The temperature value above which the board temperature is deemed to be hot.
boardEnvTempWarm
The temperature value above which the board temperature is deemed to be warm, if it is below or equal the hot value.
boardEnvTempCool
The temperature value below which the board temperature is deemed to be cool, if it is above or equal the cold value.
boardEnvTempCold
The temperature value below which the board temperature is deemed to be cold.
boardEnvTempRelHot
The temperature value above ambient at which the board temperature is deemed to be hot relative to ambient.
boardEnvTempRelWarm
The temperature value above ambient at which the board temperature is deemed to be warm relative to ambient, if it is below the relative hot value of boardEnvTempRelHot.
boardEnvTempMaxFanRelHot
The temperature value above ambient at which the board temperature is deemed to be hot relative to ambient, with all fans in the chassis running at there maximum speed.
boardEnvTempMaxFanRelWarm
The temperature value above ambient at which the board temperature is deemed to be warm relative to ambient, if it is below the relative hot value of boardEnvTempMaxFanRelHot, with all fans in the chassis running at there maximum speed.
psEnvSlotTable
A list of networking modules installed in this chassis.
psEnvSlotEntry
A slot entry containing objects for a particular module.
psEnvSlotID
The slot number of a chassis slot in which this power supply is installed. An unique value, in the range between 1 and and the value of chNumSlots. This object is similiar to chSlotID in the Chassis MIB.
psEnvTemp
The temperature of the power supply. If this sensor is broken or not supported, then this object will be set to zero. The temperature is in degrees Fahrenheit * 10.
psEnvTempStatus
This object reflects the status of the power supply temperature reading.
psEnvTempHot
The temperature value above which the power supply temperature is deemed to be hot.
psEnvTempWarm
The temperature value above which the power supply temperature is deemed to be warm, if it is below or equal the hot value.
psEnvTempCool
The temperature value below which the power supply temperature is deemed to be cool, if it is above or equal the cold value.
psEnvTempCold
The temperature value below which the power supply temperature is deemed to be cold.
psEnvFanStatus
This object reflects the status of the chassis fan.
psEnvFanAdmin
This object is used to select the operational mode of the fan. If the value is set to 1 (auto) then fan speed is based on temperature. If the value is set to 3 (testing) then value will return to it's previous value prior to being set at 3.
psEnvFanSpeed
The fan speed expressed as a percentage of the maximum fan speed.

You can start network devices monitoring using free 30-day trial version of IPHost Network Monitor right now. Witn IPHost SNMP monitor you can monitor network performance, audit network usage, detect network faults, or inappropriate access. The IPHost's SNMP monitor can communicate and interact with any SNMP-enabled device.

MIBs list