CISCO-VISM-CONN-STAT-MIB

CISCO-VISM-CONN-STAT-MIB Download

MIBs list

The MIB module contain VISM channel counters information.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-VISM-CONN-STAT-MIB

vismChanCntGrpTable
vismChanCntGrpTable contains VISM channels counters. ::= { vismChanCntGrp 1 } SYNTAX VismChanCntGrpEntry MAX-ACCESS not-accessible STATUS current DESCRIPTION An entry for each voice channel. INDEX { vismCntChanNum } ::= { vismChanCntGrpTable ...
vismChanCurrentXmtCellRate
This object counts the current transmit cell rate (cells per second) for the channel.
vismChan24HrPeakRcvCellRate
This object counts the peak receive cell rate (cells per second) for the channel since midnight with reference to node time; the peak cell rate counter gets reset to 0 every 24 hours at midnight. If the node time is changed, the counter will continue to g ...
vismChanCurrentRcvCellRate
This object counts the current receive cell rate (cells per second) for the channel.
vismChanAisSuppressCount
This object holds the number of times that ATM network alarms were successfully suppressed and prevented from propagating onto the TDM side for this PVC.
vismChanXmtAisCnts
The number of instances that an ATM AIS alarm was transmitted.
vismChanRcvAisCnts
The number of instances that an ATM AIS alarm was received.
vismChanXmtFerfCnts
The number of instances that an ATM FERF alarm was transmitted.
vismChanRcvFerfCnts
The number of instances that an ATM FERF alarm was received.
vismChanAal5PduSentPkts
This object counts the number of AAL5 PDUs transmitted to the network. This is only applicable to the PVCs configured as AAL5 PVCs, VoIP (Voice Over IP) PVCs or CCS (Common Channel Signaling) PVCs in the case of VoAAL2 applications.
vismChanAal5PduRcvdPkts
This object counts the number of AAL5 PDUs received from the network. This is only applicable to the PVCs configured as AAL5 PVCs, VoIP (Voice Over IP) PVCs or CCS (Common Channel Signaling) PVCs in the case of VoAAL2 applications.
vismChanAisDelayLeft
The real-time number of seconds remaining for the AIS delay timer after which the ATM alarm will be propagated to the TDM side. This object is tied to the vismChanAisDelayTime object in the CISCO-VISM-CONN-MIB. vismChanAisDelayTime will store the configur ...
vismChanOamLpbkTimeoutCnts
The number of instances that OAM loopback timeout alarm has occurred since the system was last re-initialized.
vismChanOamLpbkTimeoutDuration
The total duration of OAM loopback timeout alarms since the system was last re-initialized.
ciscoVismConnStatGroup
The collection of objects which are used to represent VISM channel counter group.
ciscoVismConnStatGroup1
The collection of objects which are used to represent VISM channel counter group.
ciscoVismConnStatGroup2
The collection of objects which are used to represent VISM channel counter group.
ciscoVismConnStatGroup3
The collection of objects which are used to represent VISM channel counter group.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list