CISCO-VIRTUAL-INTERFACE-MIB

CISCO-VIRTUAL-INTERFACE-MIB Download

MIBs list

The MIB module for creation and deletion of Virtual Interfaces and Virtual Interface Groups. In addition to this MIB, interface mib (rfc2863) will also contain entries for virtual interfaces. There are two ways virtual interfaces can be created and bound to an interface. The MIB Object cvifGroupsSupported indicates if a particular system supports the Virtual Interface Group concept. If Virtual Interface Groups are supported, then a virtual interface is always created/deleted in conjunction with its associated Virtual Interface Group. The Virtual Interface Group, which may be associated to multiple virtual interfaces, is then bound to a physical interface or another virtual interface like an EtherChannel. If Virtual Interface Groups are not supported, then a virtual interface is created/deleted independently. And each virtual interface is bound to a physical interface or another virtual interface like an EtherChannel. In order for a virtual interface to become operational, it must be directly or indirectly (via its Virtual Interface Group) bound to a physical interface or possibly to another virtual interface such as an EtherChannel. The cvifGroupTable is only used if the MIB object cvifGroupsSupported indicates Virtual Interface Groups are supported.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-VIRTUAL-INTERFACE-MIB

cvifGroupsSupported
This is a boolean that indicates whether Virtual Interface Groups are supported (and enabled). Note that many agents are unlikely to support write-access for this object. If there are entries in the cvifGroupTable when this value is being set to false, th ...
cvifGroupTable
This table facilitates the creation and deletion of a Virtual Interface Group. Entries in this table exist only if cvifGroupsSupported is 'true'. A Virtual Interface Group is a collection of virtual interfaces on an adapter in a server. The virtual inter ...
cvifGroupEntry
There is one entry in this table for each created Virtual Interface Group.
cvifGroupIndex
An index that uniquely identifies an entry in the cvifGroupTable table.
cvifGroupIfIndex
The ifIndex of this Virtual Interface Group.
cvifGroupBindingIfIndex
The ifIndex of the physical interface or another virtual interface like an Etherchannel bound to this Virtual Interface Group. The binding can happen at Virtual Interface Group creation time or at a later time. In order for Virtual Interface Group to beco ...
cvifGroupMemberList
The list of Virtual interfaces in the Virtual Interface Group.
cvifGroupCreationTime
The timestamp of this entry's creation time.
cvifGroupFailureCause
The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful. After a successful bind operation, the value of cvifGroupOperState is set to 'up'.
cvifGroupOperState
Operational state of the Virtual Interface Group.
cvifGroupRowStatus
The status of this conceptual row. The RowStatus becomes active on successful creation of a Virtual Interface Group. It is not necessary for the cvifGroupBindingIfIndex to be set at the time of creation.
cvifTable
This table facilitates the creation and deletion of virtual interfaces. Virtual interfaces may or may not be associated with a Virtual Interface Group according to the value of cvifGroupsSupported. In order for a virtual interface to become operational, ...
cvifEntry
There is one entry in this table for each created virtual Interface
cvifIndex
When Virtual Interface Groups (as indicated by the cvifGroupsSupported MIB object) are supported, this is the Virtual Interface Group index. Otherwise, this index identifies the virtual interface.
cvifType
The type of virtual interface desired by the network manager. If and when a row is created in this table by using a SetRequest to cvifRowStatus, the corresponding ifTable row will be created by the agent with its ifType as specified by this object. Note t ...
cvifIfIndex
The ifIndex of this virtual interface.
cvifCreationTime
The timestamp of this entry's creation time.
cvifBindingIfIndex
This field is supported only when Virtual Interface Groups are not supported, as indicated by the cvifGroupsSupported MIB object. It identifies the ifIndex of the interface that this virtual interface is bound to. In order for a virtual interface to beco ...
cvifFailureCause
This field is supported only when Virtual Interface Groups are not supported, as indicated by the cvifGroupsSupported MIB object. The cause of failure for the last bind operation. This object will be zero length if and only if the bind is successful.
cvifRowStatus
The status of this conceptual row. The RowStatus becomes active on successful creation of a virtual interface. If Virtual Interface Groups are not supported, as indicated by the cvifGroupsSupported MIB object, the virtual interface must be bound to a phys ...
cvifGroupConformanceObjects
A collection of objects related to implementation of virtual interfaces bound to Virtual Interface Groups.
cvifCommonConformanceObjects
A collection of objects related to all implementations of virtual interfaces.
cvifPhysicalConformanceObjects
A collection of objects related to implementation of virtual interfaces bound to physical interfaces.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list