CISCO-TN3270SERVER-MIB

CISCO-TN3270SERVER-MIB Download

MIBs list

The MIB module for TN3270 Server. MIB description The PU and LU MIB are defined in RFC 1666. This MIB provides additional information on IP and LU mapping.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-TN3270SERVER-MIB

tn3270sGlobalTable
A list of TN3270 server and DLUR global information.
tn3270sGlobalEntry
Parameters values for a group.
tn3270sIndex
Index used to uniquely identify each tn3270 server instance. This index value shall not be reused when the server is shut down and a new instance invoked.
tn3270sCpuCard
The identity of the board running the server.
tn3270sMaxLus
The maximum number of LUs supported by the server.
tn3270sLusInUse
The number of LUs currently in use on the server.
tn3270sStartupTime
The timestamp when the tn3270 server started.
tn3270sGlobalTcpPort
The default TCP port of this TN3270 Server, which is inherited by the PU if it doesn't have the TCP port explicitly defined in the router configuration for this PU.
tn3270sGlobalIdleTimeout
The number of seconds of LU inactivity (from either host or client) before the TN3270 session is disconnected. Zero seconds means that LU sessions, by default, will not be disconnected when inactive, regardless of the amount of idle time spent.
tn3270sGlobalKeepAlive
The number of seconds of inactivity from client side which the TN3270 Server allows to elapse before sending DO-TIMING-MARK to the TN3270 client. If the client does not reply within thirty minutes of such a TIMING-MARK sending, the server disconnects the ...
tn3270sGlobalUnbindAction
This variable indicates whether or not a tn3270 session will be disconnected upon UNBIND. keep indicates that no automatic disconnect will be made by the server upon receipt of an UNBIND. disconnect indicates that the session will be disconnected upon rec ...
tn3270sGlobalGenericPool
This variable indicates whether or not leftover LUs will be made available to tn3270 sessions which do not request a specific LU or LU pool. A 'leftover' LU is defined as one for which all of the following conditions hold true: .the SSCP did not send an A ...
tn3270sTimingMarkSupported
This variable indicates whether to send a timing mark to solicit a response before sending a response to the host. true indicates that a timing mark is sent, false indicates that it is not sent. By using timing mark, an application can determine the respo ...
tn3270sRunningTime
Total time elapsed since start of tn3270 server.
tn3270sStatsTable
A list of statistics for each TN3270 Server Listening IP/Port pair.
tn3270sStatsEntry
The entry contains parameters which describe the statistics of the ip stacks.
tn3270sStatsServerAddr
The ip address of this TN3270 Server Listen endpoint.
tn3270sStatsServerTcpPort
The TCP port in this TN3270 Server Listen endpoint.
tn3270sStatsMaxSess
Number of Tn3270 sessions configured which are available to be used by tn3270 clients.
tn3270sStatsSpareSess
Spare number of TN3270 sessions available for connect at query time.
tn3270sStatsConnectsIn
Total number of TN3270 session connects-in received.
tn3270sStatsDisconnects
Total number of TN3270 sessions disconnected.
tn3270sStatsTN3270ConnectsFailed
Total number of attempted sessions which failed to negotiate TN3270/E or were rejected by control point.
tn3270sStatsInboundChains
Total number of inbound(from client to host) RU chains (identified by end of record (EOR)) processed. Since every inbound RU chain is accompanied by client giving host the direction(CD), it is also a count of number of client transactions.
tn3270sStatsOutboundChains
Total number of Outbound(from host to client) RU Chains (identified by EOR) processed.
tn3270sStatsSampledHostResponses
Total number of Sampled Inbound Transactions (identified by EOR) on which response time is computed since restart of last listen on ServerAddress/TcpPort. Counters get reset at that point.
tn3270sStatsNetSampledHostResponseTime
Total response time for all sampled inbound transactions for which response time is computed. Response time is the time difference between receiving EOR from the client, and receiving the response from the host. Note that the average response time is give ...
tn3270sStatsSampledClientResponses
Total number of sampled outbound timing marks on which response time computed.
tn3270sStatsNetSampledClientResponseTime
Total response time for all sampled timing marks on which response time is computed. Response time is the time diference between sending the timeing mark to the client and receiving the response from the client. Note that this is only valid if timeing mar ...
tn3270sPuTable
This table contains objects which describe the PU configuration parameters not defined in the NAU mib, APPN mib or DLUR mib
tn3270sPuEntry
A list of TN3270 server PU parameters
tn3270sPuIndex
Index used to uniquely identify each Node instance. This is the same as snaNodeAdminIndex in the NAU MIB.
tn3270sPuIpAddr
The ip address of this TN3270 server.
tn3270sPuTcpPort
The TCP port of this TN3270 server telnet session.
tn3270sPuIdleTimeout
The number of seconds of LU inactivity (from either host or client) before the TN3270 session is disconnected. Zero seconds means that LU sessions, by default, will not be disconnected when inactive, regardless of the amount of idle time spent. 65535 (not ...
tn3270sPuKeepAlive
The number of seconds of inactivity from client side which the TN3270 Server allows to elapse before sending DO-TIMING-MARK to the TN3270 client. If the client does not reply within thirty minutes of such a TIMING-MARK sending, the server disconnect the t ...
tn3270sPuUnbindAction
This variable indicates whether or not a tn3270 session will be disconnected upon UNBIND. keep indicates that no automatic disconnect will be made by the server upon receipt of an UNBIND. disconnect indicates that the session will be disconnected upon rec ...
tn3270sPuGenericPool
This variable indicates whether or not leftover LUs will be made available to tn3270 sessions which do not request a specific LU or LU pool. A 'leftover' LU is defined as one for which all of the following conditions hold true: .the SSCP did not send an A ...
tn3270sPuState
The value identifies the current PU state. This has a different meaning for direct or DLUR PU before the link station is established. For DLUR PU, the PU is in reset state, for direct PU, this will be either sending a TEST or XID shut (1) - The PU is ...
tn3270sPuLuSeed
For Direct PU this defines the LU name prefix (LU seed) which is concatinated with the locaddr to form a unique name.
tn3270sLocalSapAddress
SAP address of the local direct node.
tn3270sRemoteSapAddress
SAP address of the remote node; valid for direct PU only.
tn3270sRemoteMacAddress
MAC address of the remote node; valid for direct PU only.
tn3270sPuIpPrecedenceScreen
The value of the PRECEDENCE field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client screen. That is from the router to the TN3270 client screen.
tn3270sPuIpPrecedencePrinter
The value of the PRECEDENCE field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client printer. That is from the router to the TN3270 client printer.
tn3270sPuIpTosScreen
The value of the TOS field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client screen. That is from the router to the TN3270 client screen.
tn3270sPuIpTosPrinter
The value of the TOS field in the Type of Service octet in the IP header set by the TN3270 server for outbound IP packets destined to the TN3270 client printer. That is from the router to the TN3270 client printer.
tn3270sIpTable
A list of IP to LU mapping entries
tn3270sIpEntry
A list of entries to relate a client IP address to the LU
tn3270sIpClientAddr
The ip address of the TN3270 client.
tn3270sIpClientTcpPort
The TCP port of the TN3270 client.
tn3270sIpPuIndex
The PU index associated with NAU and PU objects
tn3270sIpLuIndex
The LU index associated with NAU and LU objects.
tn3270sLuTable
This helps map LU to client ip/port. Also it provides other useful parameters not available elsewhere.
tn3270sLuEntry
Parameters values for a group.
tn3270sLuPuIndex
Index used to uniquely identify each PU instance. This is the same as snaNodeAdminIndex in the NAU MIB.
tn3270sLuIndex
Index used to uniquely identify the LU instance within a PU. It is the locaddr. This is the same as snaLuAdminLuIndex in the NAU MIB.
tn3270sLuClientAddr
The ip address of the TN3270 client connected to this LU.
tn3270sLuClientTcpPort
The TCP port of the TN3270 client connected to this LU.
tn3270sLuTelnetType
This indicates whether the negotiated TN3270 session. TN3270, TN3270E or never connected.
tn3270sLuTermModel
Terminal type or model number of the incoming TN3270 client.
tn3270sLuState
The value identifies the current LU state. inactive (1) - LU didn't receive ACTLU. active (2) - LU received ACTLU and acknowledged positively. pSdt (3) - LU is bound but there is no SDT yet. act/session (4) - LU is bound and in session. ...
tn3270sLuCurInbQsize
After inbound pacing credit is exhausted, the inbound data is queued. This is the number of inbound frames queued waiting for host pacing response.
tn3270sLuCurOutQsize
The number of TCP packets in the server queued for transmission to the client
tn3270sLuIdleTime
Time since last activity was recorded on this LU.
tn3270sLuType
This indicates whether LU is dynamic or static. dynamic (1) - LU is configured as DDDLU. static (2) - LU is configured as specific. Host will send ACTLU as soon as PU is active. ::= { tn3270sLuEntry 12 } SYNTAX DisplayString (SIZE (1..8) ) MAX-ACCESS rea ...
tn3270sLuLfsid
This is the session identifier on a PU 2.1 link.
tn3270sLuLastEvent
Time at which the last data was logged for this LU.
tn3270sLuEvents
An array of octets indicating the latest events which happened in this LU. Octet 1 is the most recent event, octet 2 the next most recent and so on. Although the maximum number of events kept is 16, the actual number of events kept may be lower than that. ...
tn3270sPuNailClientIpMask
The subnet mask of the nailed TN3270 client.
tn3270sPuNailType
The nailing type configured for the range of LUs within this PU is either screen or printer. screen - The range of LUs will only be connected to TN3270 clients with a device type which is not 328*. If an LU is statically configured at the host, then it ...
tn3270sPuNailLuLast
The last LU in this range nailed to this client ip address.
tn3270sIpNailTable
A list of reserved LUs and their associated IP addresses is represented here for the containing PU. Each LU is configured for a specific client IP address. This association between the LU and the client IP Address is called nailing. The client is said to ...
tn3270sIpNailClientIpMask
The subnet mask of the nailed TN3270 client.
tn3270sIpNailType
The nailing type configured for the range of LUs within this PU is either screen or printer. screen - The range of LUs will only be connected to TN3270 clients with a device type which is not 328*. If an LU is statically configured at the host, then it ...
tn3270sIpNailLuLast
The last LU in this range nailed to this client ip address.
ciscoTn3270ServerMIBGroup
A collection of objects providing Tn3270 ability to a Cisco agent.
ciscoTn3270ServerMIBGroupObsolete
A collection of objects providing Tn3270 ability to a Cisco agent.
ciscoTn3270ServerMIBGroupRev1
A collection of objects providing LU nailing and IP precedence features.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list