CISCO-SYSLOG-MIB

CISCO-SYSLOG-MIB Download

MIBs list

The MIB module to describe and store the system messages generated by the IOS and any other OS which supports syslogs.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-SYSLOG-MIB

clogNotificationsSent
The number of clogMessageGenerated notifications that have been sent. This number may include notifications that were prevented from being transmitted due to reasons such as resource limitations and/or non-connectivity. If one is receiving notifications, ...
clogNotificationsEnabled
Indicates whether clogMessageGenerated notifications will or will not be sent when a syslog message is generated by the device. Disabling notifications does not prevent syslog messages from being added to the clogHistoryTable.
clogMaxSeverity
Indicates which syslog severity levels will be processed. Any syslog message with a severity value greater than this value will be ignored by the agent. note: severity numeric values increase as their severity decreases, e.g. 'error' is more severe than ...
clogMsgIgnores
The number of syslog messages which were ignored. A message will be ignored if it has a severity value greater than clogMaxSeverity.
clogMsgDrops
The number of syslog messages which could not be processed due to lack of system resources. Most likely this will occur at the same time that syslog messages are generated to indicate this lack of resources. Increases in this object's value may serve as ...
clogOriginIDType
This object identifies the type of value that will be contained in clogOriginID object. The possible value(s) are: 'none' : do not send origin identifier in syslog messages. 'other' : type that is not identified by other values specified in thi ...
clogOriginID
This object is used for configuring the origin identifier for the syslog messages. The origin identifier is useful for identifying the source of system logging messages in cases syslog messages from multiple devices are sent to a single syslog host. The o ...
clogHistTableMaxLength
The upper limit on the number of entries that the clogHistoryTable may contain. A value of 0 will prevent any history from being retained. When this table is full, the oldest entry will be deleted and a new one will be created.
clogHistMsgsFlushed
The number of entries that have been removed from the clogHistoryTable in order to make room for new entries. This object can be utilized to determine whether your polling frequency on the history table is fast enough and/or the size of your history table ...
clogHistoryTable
A table of syslog messages generated by this device. All 'interesting' syslog messages (i.e. severity <= clogMaxSeverity) are entered into this table.
clogHistoryEntry
A syslog message that was previously generated by this device. Each entry is indexed by a message index.
clogHistIndex
A monotonically increasing integer for the sole purpose of indexing messages. When it reaches the maximum value the agent flushes the table and wraps the value back to 1.
clogHistFacility
Name of the facility that generated this message. For example: 'SYS'.
clogHistSeverity
The severity of the message.
clogHistMsgName
A textual identification for the message type. A facility name in conjunction with a message name uniquely identifies a message type.
clogHistMsgText
The text of the message. If the text of the message exceeds 255 bytes, the message will be truncated to 254 bytes and a '*' character will be appended - indicating that the message has been truncated.
clogHistTimestamp
The value of sysUpTime when this message was generated.
clogMaxServers
The maximum number of syslog servers that can be configured for the system in clogServerConfigTable. A value of zero for this object indicates there is no specified limit for the system and is only dictated by system resources.
clogServerConfigTable
This table contains entries that allow application to configure syslog servers for the system. The maximum number of entries that can be created for this table is limited by the object clogMaxServers.
clogServerConfigEntry
An entry containing information about syslog servers configured for the system.
clogServerAddrType
The type of Internet address of this syslog server.
clogServerAddr
The Internet address of this syslog server. The type of this address is determined by the value of the clogServerAddrType object.
clogServerStatus
The status object used to manage rows in this table. A row may only be created by setting this object to 'createAndGo'. A row may only be deleted by setting this object to 'destroy'.
ciscoSyslogMIBGroup
A collection of objects providing the syslog MIB capability.
clogServerGroup
A collection of objects providing syslog server information for the system.
clogOriginIDGroup
A collection of objects providing information on origin of syslog messages.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list