CISCO-SWITCH-QOS-MIB Download
This MIB module extends the CISCO-CLASS-BASED-QOS-MIB
by defining configuration and statistics information
specific to the quality of service (QoS) features of
Layer2/3 switch functionality implemented in Cisco
devices. It is applicable to a device which is fully
within a single QoS domain, although one or more
boundaries with other QoS domains can be immediately
adjacent to this device.
IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges,
Firewalls, Repeaters.
OID list for CISCO-SWITCH-QOS-MIB
- csqDscpRewriteEnable
- This object specifies whether DSCP rewrite is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether DSCP rewrite is enabled at any different level of granularity, then this object's v ...
- csqPoliceRedirectedTrafficEnable
- This object specifies whether ACL-redirected traffic policing is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether ACL-redirected traffic is enabled at any different level of gran ...
- csqPortQueueingModeEnable
- This object specifies whether port-queueing mode is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether port-queueing mode is enabled at any different level of granularity, then thi ...
- csqMarkingStatisticsEnable
- This object specifies whether statistics collection for policy that sets a trust state is enabled at a device-level of granularity, i.e., 'true' = enabled and 'false' = disabled. If no other objects specify whether statistics collection for policy that se ...
- csqTenGOnlyMode
- This object specifies whether only 10-Gigabit Ethernet uplink interfaces are used exclusively. 'true' indicates that only the 10-Gigabit Ethernet uplink interfaces are used. The other uplink interfaces which are not of 10-Gigabit capacity will be in admin ...
- csqCosToDscpTable
- This table contains the mapping of CoS values to DSCP values. This mapping table consist of eight CoS values (0 through 7) and their corresponding DSCP values. The mapping given by this table is used for all packets received on an interface if and only if ...
- csqCosToDscpEntry
- Each row contains the mapping from a CoS value to a DSCP value.
- csqCosToDscpCos
- The CoS value being mapped to the DSCP value.
- csqCosToDscpDscp
- The DSCP value which the CoS value maps to.
- csqIpPrecToDscpTable
- This table contains the mapping of IP Precedence to DSCP. This mapping table consist of eight IpPrecedence values (0 through 7) and their corresponding DSCP values. The mapping given by this table is used for all packets received on an interface if and on ...
- csqIpPrecToDscpEntry
- Each row contains the mapping from an IP Precedence value to a DSCP value.
- csqIpPrecToDscpIpPrec
- The IP Precedence value being mapped to the DSCP value.
- csqIpPrecToDscpDscp
- The DSCP value which the IP Precedence value maps to.
- csqExpToDscpTable
- This table contains the mapping of MPLS-EXP values to DSCP values. This mapping table consist of eight MPLS-EXP values (0 through 7) and their corresponding DSCP values.
- csqExpToDscpEntry
- Each row contains the mapping from a EXP value to a DSCP value.
- csqExpToDscpExp
- The EXP value being mapped to the DSCP value.
- csqExpToDscpDscp
- The DSCP value which the EXP value maps to.
- csqDscpMappingTable
- This table always has 64 entries, one for each DSCP value. The table contains four mappings from the DSCP value assigned to a packet. One mapping is to the egress CoS to be stored in the layer-2 frame headers for output on 802.1Q or ISL interfaces. Anothe ...
- csqDscpMappingEntry
- Each row contains the mapping from DSCP value to CoS value, MPLS-EXP value and policed DSCP.
- csqDscpMappingDscp
- The DSCP value being mapped to the CoS, EXP and policed DSCP value.
- csqDscpMappingCos
- The CoS value which the DSCP values maps to.
- csqDscpMappingExp
- The MPLS-EXP value which the DSCP values maps to.
- csqDscpMappingNormalBurstDscp
- The normal burst policed DSCP value which the DSCP values maps to.
- csqDscpMappingMaxBurstDscp
- The maximum burst policed DSCP value which the DSCP values maps to.
- csqMaxCosMutationMap
- The maximum number of CoS mutation map that can be supported in the device.
- csqCosMutationTable
- This table indicates CoS mutation maps in the device.
- csqCosMutationEntry
- Each row contains the status of this instance. A row instance can be created or removed by setting the appropriate value of its RowStatus object. Once the number of entries in this table reaches the maximum number of CoS mutation map supported in the devi ...
- csqCosMutationMapName
- The name of the CoS mutation map.
- csqCosMutationRowStatus
- This object is used to manage the creation and deletion of rows in this table.
- csqCosMutationMappingTable
- This table provides management information for CoS mutation mapping. CoS mutation is applied to ingress traffic. This mutation occurs before the CoS to DSCP mapping for applicable traffic as specified in csqCosToDscpTable.
- csqCosMutationMappingEntry
- Each row contains the mapping from a CoS value to another CoS value. When the entry for csqCosMutationMapName in the csqCosMutationTable is created, corresponding entries in this table are initialized with a default mapping which is the identity function. ...
- csqCosMutationFromCos
- The input CoS value being mapped to the output CoS value in this mutation map.
- csqCosMutationToCos
- The output CoS value which the input CoS value maps to.
- csqMaxDscpMutationMap
- The maximum number of DSCP mutation map that can be supported in the device.
- csqDscpMutationTable
- This table indicates DSCP mutation maps in the device.
- csqDscpMutationEntry
- Each row contains the status of this instance. A row instance can be created or removed by setting the appropriate value of its RowStatus object. Once the number of entries in this table reaches the maximum number of DSCP mutation map supported in the dev ...
- csqDscpMutationMapName
- The name of the DSCP mutation map.
- csqDscpMutationRowStatus
- This object is used to manage the creation and deletion of rows in this table.
- csqDscpMutationMappingTable
- This table provides management information for DSCP mutation mapping. DSCP mutation is applied to egress traffic. This mutation occurs after the mappings specified in csqDscpMappingTable.
- csqDscpMutationMappingEntry
- Each row contains the mapping from an input DSCP value to an output DSCP value. When the entry for csqDscpMutationMapName in the csqDscpMutationTable is created, corresponding entries in this table are initialized with a default mapping which is the ident ...
- csqDscpMutationFromDscp
- The input DSCP value being mapped to the output DSCP value in this mutation map.
- csqDscpMutationToDscp
- The output DSCP value which the input DSCP value maps to.
- csqMaxExpMutationMap
- The maximum number of EXP mutation can be supported in the device.
- csqExpMutationTable
- This table indicates EXP mutation maps in the device.
- csqExpMutationEntry
- Each row contains the status of this instance. A row instance can be created or removed by setting the appropriate value of its RowStatus object. Once the number of entries in this table reaches the maximum number of EXP mutation map supported in the devi ...
- csqExpMutationMapName
- The name of the EXP mutation map.
- csqExpMutationRowStatus
- This object is used to manage the creation and deletion of rows in this table.
- csqExpMutationMappingTable
- This table provides management information for EXP mutation mapping. EXP mutation is applied to egress traffic. This mutation occurs after the mapping specified in csqExpToDscpTable.
- csqExpMutationMappingEntry
- Each row contains the mapping from input EXP to output EXP value. When the entry for csqExpMutationMapName in the csqExpMutationTable is created, corresponding entries in this table are initialized with a default mapping which is the identity function. Wh ...
- csqExpMutationFromExp
- The input EXP value being mapped to the output EXP value in this mutation map.
- csqExpMutationToExp
- The output EXP value which the input EXP value maps to.
- csqIfMutationConfigTable
- A table containing the mutation configuration for mutation capable interface in the device. If a mutation capable interface does not have a row in this table, there is no mutation performed at such interface.
- csqIfMutationConfigEntry
- A row instance contains the name of CoS, DSCP and EXP mutation map and RowStatus object.
- csqIfCosMutationMap
- This object specifies the name of CoS mutation map applied at this interface. If CoS mutation is not performed at the interface, then the value of this object is the zero-length string; otherwise, the value of this object must be the name of a row in the ...
- csqIfDscpMutationMap
- This object specifies the name of DSCP mutation map applied at this interface. If DSCP mutation is not performed at the interface, then the value of this object is the zero-length string; otherwise, the value of this object must be the name of a row in th ...
- csqIfExpMutationMap
- This object specifies the name of EXP mutation map applied at this interface. If EXP mutation is not performed at the interface, then the value of this object is the zero-length string; otherwise, the value of this object must be the name of a row in the ...
- csqIfMutationRowStatus
- This object is used to manage the creation, and deletion of rows in the table.
- csqIfConfigTable
- This table provides QoS configuration for QoS manageable interface in the device.
- csqIfConfigEntry
- A row instance contains the default CoS value and trust state of a Qos manageable interface.
- csqIfDefaultCos
- This object specifies the default CoS value configured at this physical interface. This default value will be assigned to packet which does not have a CoS value in its layer-2 header when the packet arrives at this interface or if the value of csqIfTrustS ...
- csqIfTrustState
- This object is used to set the trust state of an interface. (whether the packets arriving at an interface are trusted to carry the correct data for classification.) If the object is untrusted(1), then the DSCP assigned to the packet is the layer2 CoS valu ...
- csqIfQueueModeCpb
- This object indicates the queue mode capability at this interface. 'cos' indicates that the interface is capable of queueing a packet based on the CoS value of the packet. 'dscp' indicates that the interface is capable of queueing a packet based on the DS ...
- csqIfConfigQueueMode
- Specifies the queueing mode at this interface. 'cos' indicates that the interface is queueing a packet based on the CoS value of the packet. This value can only be set if the 'cos' bit of csqIfQueueModeCpb is set. 'dscp' indicates that the interface is qu ...
- csqIfIngressPolicyMap
- Specifies the name of an existing policy-map attached to this interface in ingress direction. If there is no such policy-map attached, the value of this object is zero-length string.
- csqIfEgressPolicyMap
- Specifies the name of an existing policy-map attached to this interface in egress direction. If there is no such policy-map attached, the value of this object is zero-length string.
- csqIfIngressQueueingEnable
- This object indicates if ingress queueing is enabled at this interface. 'true' indicates ingress queueing is enabled. 'false' indicates ingress queueing is disabled.
- csqIfEgressQueueingEnable
- This object indicates if egress queueing is enabled at this interface. 'true' indicates egress queueing is enabled. 'false' indicates egress queueing is disabled.
- csqIfQueueingTrustState
- This object indicates the queueing trust state of an interface. If the object is untrusted(1), then the DSCP assigned to the packet is the layer2 CoS value denoted by csqIfDefaultCos object mapped to a DSCP by the CoS-to-DSCP mapping defined in object csq ...
- csqIfCosToQueueTable
- This table provides the information for and configuration of assigning packets to queues and thresholds based on their CoS value.
- csqIfCosToQueueEntry
- The assignment of packets at an interface to a pair of queue and threshold based on their CoS value and traffic direction.
- csqIfCosToQueueDirection
- The traffic direction of a packet.
- csqIfCosToQueueCos
- The CoS value of the packet which the queue and threshold assignment is based on.
- csqIfCosToQueueQueueNumber
- The queue number where packet whose CoS value denoted by csqIfCosToQueueCos will be assigned to.
- csqIfCosToQueueThresholdNumber
- The threshold number where packet whose CoS value denoted by csqIfCosToQueueCos will be assigned to.
- csqIfDscpToQueueTable
- This table provides the information for and configuration of assigning packets to queues and thresholds based on their DSCP value and traffic direction.
- csqIfDscpToQueueEntry
- The assignment of packets at an interface to a pair of queue and threshold based on their DSCP value and packets traffic direction.
- csqIfDscpToQueueDirection
- The traffic direction of a packet.
- csqIfDscpToQueueDscp
- The DSCP value of the packet which the queue and threshold assignment is based on.
- csqIfDscpToQueueQueueNumber
- The queue number where packet whose DSCP value denoted by csqIfDscpToQueueDscp will be assigned to.
- csqIfDscpToQueueThresholdNumber
- The threshold number where packet whose DSCP value denoted by csqIfDscpToQueueDscp will be assigned to.
- csqIfDropConfigTable
- This table maintains threshold parameters for the specified queue number and threshold number of an interface.
- csqIfDropConfigEntry
- For each threshold of a queue, there are parameters to set on the threshold. This entry contains the parameters.
- csqIfDropConfigDirection
- Indicates the queue direction.
- csqIfDropConfigQueueIndex
- Indicates queue number.
- csqIfDropConfigThresholdIndex
- Indicates threshold number.
- csqIfDropConfigDropAlgorithm
- Specifies the drop algorithm running at this queue and threshold. 'tailDrop' indicates that this queue and threshold drops packet using tail-drop algorithm. This value is configurable only if 'tailDrop' bit in the value of qosIfCapabilities object for the ...
- csqIfDropConfigDropThreshold
- This object specifies the drop threshold parameter for a pair of queue and threshold of an interface when the drop algorithm is tail drop. Once the packets in the buffer is more than the value of this object, the incoming packets of the buffer are dropped ...
- csqIfDropConfigMinWredThreshold
- This object specifies the min WRED threshold parameter of a threshold number for the specific interface when WRED drop algorithm is used. WRED (Weighted Random Early Detect) is a mechanism which drops packets fairly during congestion so that adaptive appl ...
- csqIfDropConfigMaxWredThreshold
- This object specifies the max WRED threshold parameter of a threshold number for the specific interface when WRED drop algorithm is used. This object is configurable only if 'wred' bit in the value of qosIfCapabilities object for the same ifIndex and traf ...
- csqIfDropConfigQueueBuffer
- This object specifies how the queue buffer behaves when the drop algorithm is tail drop. 'shared' indicates that the queue buffer is shared among all queues at the interface. 'dedicated' indicates that each queue will be assigned a dedicated portion of th ...
- csqIfQueueTable
- A table containing configuration parameter for each queue on a QOS managable interface.
- csqIfQueueEntry
- A set of WRR weight and queue size allocation weight for ingress or egress of a specific queue.
- csqIfQueueDirection
- Indicates the queue direction.
- csqIfQueueNumber
- Indicates queue number.
- csqIfQueueWrrWeight
- Specifies the WRR weight. This object is configurable only if the value of csqIfQueueScheduling is 'wrr'. When the value of csqIfQueueScheduling is not 'wrr', the value of this object has no effect.
- csqIfQueueSizeWeight
- Specifies the queue size weight.
- csqIfQueueStatsGranularity
- Indicates whether QoS statistics is maintained per queue or per queue per threshold. 'perQueue' indicates that QoS statistics is maintained per queue. 'perQueueThresh' indicates that QoS statistics is maintained per queue per threshold.
- csqIfQueueClassMapName
- Specifies the name of an existing class-map attached at this interface for a queue in the specified direction. If there is no such class-map attached, the value of this object is zero-length string.
- csqIfQueueScheduling
- Specifies the queue scheduling method. 'wrr' indicates that the queue scheduling method is Weight Round Robin. 'srr' indicates that the queue scheduling method is Shaped Round Robin.
- csqIfQueueSrrWeight
- Specifies the SRR weight. This object is configurable only if the value of csqIfQueueScheduling is 'srr'. When the value of csqIfQueueScheduling is not 'srr', the value of this object has no effect.
- csqIfModeConfigTable
- A table used to configure the QoS mode for layer-2 interface.
- csqIfModeConfigEntry
- An entry containing QoS mode information of layer-2 interface.
- csqIfVlanBasedQosModeEnable
- Specifies if VLAN-based mode is enabled or disabled at the specified interface. If 'true', policy map that is attached to this interface has no effect, and QoS is driven by the policy map that is attached to the corresponding VLAN interface that this inte ...
- csqIfConsistencyCheckTable
- A table used to configure the QoS-port attribute consistency check for Port Channel interface identified by ifIndex. QoS-port attribute consistency check consists of but not limited to checking for members of a Port Channel interface having the same queue ...
- csqIfConsistencyCheckEntry
- An entry containing QoS-port attribute consistency check information of Port Channel interface.
- csqIfConsistencyCheckEnable
- Specifies if QoS-port attribute consitency check is enabled or disabled at the specified channel interface. If 'true', QoS-port attribute consistency check is enabled. If 'false', QoS-port attribute consistency check is disabled.
- csqIfStatsTable
- A table containing QoS statistics counters per QoS manageable interface.
- csqIfStatsEntry
- An entry contains statistics, such as a drop packet counter, which are per interface (ifIndex), per direction, per queue and per threshold.
- csqIfStatsDirection
- Indicates traffic direction of an interface.
- csqIfStatsQueueNumber
- Indicates the queue number of the interface for which statistics are collected. For example : if the interface has a queue type of oneP2Q2t, this index value can be 1, 2, 3.
- csqIfStatsThresholdNumber
- Indicates the threshold number of a queue on the interface for which statistics are collected. For example : if the interface has a queue type of oneP2Q2t, this index value can be 1, 2. If the value of the corresponding csqIfQueueStatsGranularity for the ...
- csqIfStatsDropPkts
- The number of packets that have been received then dropped from the interface because they exceeded the threshold value configured at this queue and threshold of this interface.
- csqModuleStatsTable
- A table decribes QoS statistics counters per module that is capable of providing this information. Such module is identified by the entPhysicalIndex in ENTITY-MIB.
- csqModuleStatsEntry
- An entry contains per-module (entPhysicalIndex) statistics such as the number of dropped packets due to policing, number of IP packets with their ToS and CoS value changed, number of non IP packets with their CoS value changed, and number of MPLS packets ...
- csqModuleDropByPolicingPackets
- The number of packets that have been dropped due to policing.
- csqModuleTosChangedIpPackets
- The number of IP packets that have the ToS value changed due to policing.
- csqModuleCosChangedIpPackets
- The number of IP packets that have the CoS value changed due to policing.
- csqModuleCosChangedNonIpPackets
- The number of non IP packets that have the CoS value changed due to policing.
- csqModuleExpChangedMplsPackets
- The number of MPLS packets have the EXP value change due to policing.
- csqModuleStatsExtTable
- This table describes additional QoS statistics counters per module that is capable of providing this information. Such module is identified by the entPhysicalIndex in ENTITY-MIB.
- csqModuleStatsExtEntry
- Each entry contains additional per-module (entPhysicalIndex) QoS statistics.
- csqModuleTunnelEncapPackets
- The total number of tunnel encapsulated packets.
- csqModuleTunnelDecapPackets
- The total number of tunnel decapsulated packets.
- csqModuleDropByPolicingInOctets
- The total number of ingress octets which are dropped due to policing.
- csqModuleDropByPolicingOutOctets
- The total number of egress octets which are dropped due to policing.
- csqModuleFwdByPolicingInPackets
- The total number of policed ingress packets which are forwarded.
- csqModuleFwdByPolicingInOctets
- The total number of policed ingress octets which are forwarded.
- csqModuleFwdByPolicingOutPackets
- The total number of policed egress packets which are forwarded.
- csqModuleFwdByPolicingOutOctets
- The total number of policed egress octets which are forwarded.
- csqModuleHighExceedInPackets
- The total number of ingress packets exceeding the high level policing rate.
- csqModuleHighExceedInOctets
- The total number of ingress octets exceeding the high level policing rate.
- csqModuleHighExceedOutPackets
- The total number of egress packets exceeding the high level policing rate.
- csqModuleHighExceedOutOctets
- The total number of egress octets exceeding the high level policing rate.
- csqModuleLowExceedInPackets
- The total number of ingress packets exceeding the low level policing rate.
- csqModuleLowExceedInOctets
- The total number of ingress octets exceeding the low level policing rate.
- csqModuleLowExceedOutPackets
- The total number of egress packets exceeding the low level policing rate.
- csqModuleLowExceedOutOctets
- The total number of egress octets exceeding the low level policing rate.
- csqModuleDropByAggPolicerInPackets
- The total number of ingress packets which are dropped by aggregate policers.
- csqModuleDropByAggPolicerInOctets
- The total number of ingress octets which are dropped by aggregate policer.
- csqModuleDropByAggPolicerOutPackets
- The total number of egress packets which are dropped by aggregate policers.
- csqModuleDropByAggPolicerOutOctets
- The total number of egress octets which are dropped by aggregate policers.
- csqModuleFwdByAggPolicerInPackets
- The total number of ingress packets which are forwarded by aggregate policers.
- csqModuleFwdByAggPolicerInOctets
- The total number of ingress octets which are forwarded by aggregate policers.
- csqModuleFwdByAggPolicerOutPackets
- The total number of egress packets which are forwarded by aggregate policers.
- csqModuleFwdByAggPolicerOutOctets
- The total number of egress octets which are forwarded by aggregate policers.
- csqModuleAggHighExceedInPackets
- The total number of ingress packets (policed by aggregate policers) exceeding the high level policing rate.
- csqModuleAggHighExceedInOctets
- The total number of ingress octets (policed by aggregate policers) exceeding the high level policing rate.
- csqModuleAggHighExceedOutPackets
- The total number of egress packets (policed by aggregate policers) exceeding the high level policing rate.
- csqModuleAggHighExceedOutOctets
- The total number of egress octets (policed by aggregate policers) exceeding the high level policing rate.
- csqModuleAggLowExceedInPackets
- The total number of ingress packets (policed by aggregate policers) exceeding the low level policing rate.
- csqModuleAggLowExceedInOctets
- The total number of ingress octets (policed by aggregate policers) exceeding the low level policing rate.
- csqModuleAggLowExceedOutPackets
- The total number of egress packets (policed by aggregate policers) exceeding the low level policing rate.
- csqModuleAggLowExceedOutOctets
- The total number of egress octets (policed by aggregate policers) exceeding the low level policing rate.
- csqModuleDropByNetflowInPackets
- The total number of ingress packets which are dropped by the netflow feature.
- csqModuleDropByNetflowInOctets
- The total number of ingress octets which are dropped by the netflow feature.
- csqModuleDropByNetflowOutPackets
- The total number of egress packets which are dropped by the netflow feature.
- csqModuleDropByNetflowOutOctets
- The total number of egress octets which are dropped by the netflow feature.
- csqModuleFwdByNetflowInPackets
- The total number of ingress packets which are forwarded by the netflow feature.
- csqModuleFwdByNetflowInOctets
- The total number of ingress octets which are forwarded by the netflow feature.
- csqModuleFwdByNetflowOutPackets
- The total number of egress packets which are forwarded by the netflow feature.
- csqModuleFwdByNetflowOutOctets
- The total number of egress octets which are forwarded by the netflow feature.
- csqModuleNetflowExceedInPackets
- The total number of ingress packets exceeding the netflow policing rate.
- csqModuleNetflowExceedInOctets
- The total number of ingress octets exceeding the netflow policing rate.
- csqModuleNetflowExceedOutPackets
- The total number of egress packets exceeding the netflow policing rate.
- csqModuleNetflowExceedOutOctets
- The total number of egress octets exceeding the netflow policing rate.
- csqModuleCosChangedPackets
- The number of packets (IP and non-IP) that have the CoS value changed due to policing.
- csqModuleTrafficClassChangedPackets
- The number of packets that have the Traffic Class changed due to policing
- csqIfStatsExtTable
- A table containing QoS statistics counters per QoS manageable interface.
- csqIfStatsExtEntry
- Each entry contains statistics, such as a drop BPDU packet counter, which are per interface (ifIndex), per direction.
- csqIfBpduDropPkts
- The total number of dropped BPDU packets.
- csqPolicerUsageTable
- This table contains the usage of policers in the device.
- csqPolicerUsageEntry
- Each row contains the policer usage information for every module, denoted by its entPhysicalIndex, which is capable of providing this information.
- csqPolicerType
- This object indicates the policer type.
- csqPolicerUsed
- The number of policers that are currently used.
- csqPolicerTotal
- The total number of policers.
- csqModuleDscpRewriteEnableTable
- The table containing information of DSCP Rewrite Enable for each module. Such module is identified by the entPhysicalIndex in ENTITY-MIB. The value of each entry needs to be viewed in association with the global value, csqDscpRewriteEnable.
- csqModuleDscpRewriteEnableEntry
- An entry contains the configuration of DSCP Rewrite Enable Status for a DSCP Rewrite managable module. such module is of type entPhysicalClass module(9) in ENTITY-MIB. Entries are created by the agent at the system power-up or module insertion. Entries ar ...
- csqModuleDscpRewriteEnable
- This object specifies whether DSCP rewrite is enabled on a particular module when the value of csqDscpRewriteEnable is set to 'true'. The value of this object has no effect (DSCP rewrite will be disabled on this module) when the value of csqDscpRewriteEna ...
- ciscoSwitchQosMappingGroup
- A collection of objects which provides the QoS mapping information in the device.
- ciscoSwitchQosMutationGroup
- A collection of objects which provides the QoS mutation information in the device.
- ciscoSwitchQosIfConfigGroup
- A collection of object which provides QoS configuration at an interface.
- ciscoSwitchQosIfCosToQueueGroup
- A collection of objects which provides CoS assignment information at an interface.
- ciscoSwitchQosIfDropConfigGroup
- A collection of objects which provides drop threshold information at an interface.
- ciscoSwitchQosIfQueueGroup
- A collection of objects which provides queue information at an interface.
- ciscoSwitchQosIfStatsGroup
- A collection of object which provides drop packets information at an interface.
- ciscoSwitchQosModuleStatsGroup
- A collection of object which provides QoS statistics information at each QoS capable module.
- ciscoSwitchQosIfDscpAssignGroup
- A collection of objects which provides DSCP to queue assignment information at an interface.
- ciscoSwitchQosDscpRewriteGroup
- A collection of object which provides DSCP rewrite information.
- ciscoSwitchQosRedirectPolicingGroup
- A collection of object which provides information on policing of ACL-redirected traffic.
- ciscoSwitchQosPortQueueingGroup
- A collection of object which provides information on port-queuing mode.
- ciscoSwitchQosMarkingStatsGroup
- A collection of object which provides information on marking statistics configuration.
- ciscoSwitchQosIfCCGroup
- A collection of object which provides information on interface consistency check configuration.
- ciscoSwitchQosIfModeConfigGroup
- A collection of object which provides information on QoS mode configuration.
- ciscoSwitchQosPolicerUsageGroup
- A collection of objects which provides information on QoS policer usage.
- ciscoSwitchQosModuleStatsExtGroup
- A collection of object which provides additional QoS statistics information at each QoS capable module.
- ciscoSwitchQosIfStatsExtGroup
- A collection of objects which provides additional interface QoS statistics information.
- ciscoSwitchQosModuleDscpRewriteGroup
- A collection of object which provides DSCP rewrite information for each module.
- ciscoSwitchQosModuleClassChangedGroup
- A collection of object which provides CoS/Traffic Class changed packets count information for each module.
- ciscoSwitchQosTenGOnlyModeGroup
- A collection of object which provides 10Gigabit Ethernet only mode information.
- ciscoSwitchQosIfQueueModeGroup
- A collection of object which provides queue mode information for each QoS capable interface.
- ciscoSwitchQosIfLanQueuingGroup
- A collection of object which provides LAN queueing mapping information for each QoS capable interface.
- ciscoSwitchQosIfQueueBufferGroup
- A collection of object which provides tail drop queue buffer information for each QoS capable interface.
- ciscoSwitchQosIfQueueSchedulingGroup
- A collection of object which provides queue scheduling information for each QoS capable interface.
- ciscoSwitchQosIfQueueingGroup
- A collection of object which provides queueing information for each QoS capable interface.
Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.
