CISCO-SP-MIB

CISCO-SP-MIB Download

MIBs list

The MIB for managing the SS7 Signalling Point (SP) implemented in the Cisco IOS SS7 offload product. The relevant ITU documents describing this technology is the ITU Q series, including ITU Q.700: Introduction to CCITT Signalling System No. 7 and ITU Q.701 Functional description of the message transfer part (MTP) of Signalling System No. 7. This MIB models the SP as follows: The SP is associated with one or more point codes. Each pointcode is associated with: an ss7 variant, timers, and linksets. Linksets contain: destination point code linkset byte/packet statistics, accounting information per DPC and OPC violation accounting information per DPC and OPC links, reference to incoming and outgoing ACL reference to a routing table for each SS7 packet type Links contain: timers, and byte/packet statistics.

IPHost Network Monitor offer an easy way of SNMP monitoring your Cisco Servers, Routers, Switches, Bridges, Firewalls, Repeaters.

OID list for CISCO-SP-MIB

cSpSs7Variant
The SS7 variant implemented in this SP.
cSpPointCode
The point code for this SP.
cSpMtp2T01
Alignment ready timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpMtp2T02
Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType i ...
cSpMtp2T03
Aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpMtp2T4N
Proving period timer normal timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpMtp2T4E
Proving period timer emergency timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpMtp2T05
Sending SIB timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpMtp2T06
Remote congestion timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpMtp2T07
Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpMtp2T08
Interval timer for error interval monitor.
cSpMtp3T01
Delay to avoid message mis-sequencing on changeover.
cSpMtp3T02
Waiting for changeover acknowledgement.
cSpMtp3T03
Time controlled diversion-delay to avoid mis-sequencing on change back.
cSpMtp3T04
Waiting for change back acknowledgement (first attempt).
cSpMtp3T05
Waiting for change back acknowledgement (second attempt).
cSpMtp3T06
Delay to avoid message mis-sequencing on controlled rerouting.
cSpMtp3T07
Waiting for signalling data link connection acknowledgement.
cSpMtp3T08
Transfer prohibited inhibition timer (transient solution).
cSpMtp3T10
Waiting to repeat signalling routeset test message.
cSpMtp3T11
Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).
cSpMtp3T12
Waiting for uninhibit acknowledgement.
cSpMtp3T13
Waiting for force uninhibit.
cSpMtp3T14
Waiting for inhibition acknowledgement.
cSpMtp3T15
Waiting to start signalling routeset congestion test.
cSpMtp3T16
Waiting for routeset congestion status update.
cSpMtp3T17
Delay to avoid oscillation of initial alignment failure and link restart.
cSpMtp3T18
Timer within a signalling point whose MTP restarts, for supervising link and linkset activation as well as the receipt of routing information.
cSpMtp3T19
Supervision timer during MTP restart to avoid possible ping-pong of TFP, TFR2) and TRA messages.
cSpMtp3T20
Overall MTP restart timer at the signalling point whose MTP restarts. Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.
cSpMtp3T21
Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.
cSpMtp3T22
Local inhibit test timer.
cSpMtp3T23
Remote inhibit test timer.
cSpMtp3T24
Stabilizing timer after removal of local processor outage, used in LPO latching to RPO (national option)
cSpMtp3T25
Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.
cSpMtp3T26
Timer at restarting SP waiting to repeat traffic restart waiting message.
cSpMtp3T27
Minimum duration of unavailability for full restart.
cSpMtp3T28
Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.
cSpMtp3T29
Timer started when TRA sent in response to unexpected TRA or TRW.
cSpMtp3T30
Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.
cSpMtp3T31
False link congestion detection timer.
cSpMtp3T32
Link oscillation timer - Procedure A.
cSpMtp3T33
Probation timer for link oscillation - Procedure B.
cSpMtp3T34
Suspension timer for link oscillation - Procedure B.
cSpLinksetTable
A table of linksets for this SP.
cSpLinksetTableEntry
A list of SP linkset attributes for a particular SP entity.
cSpLinksetName
The name of the linkset.
cSpLinksetAdjacentPointCode
The point code to which this linkset is connected.
cSpLinksetState
The status of this linkset.
cSpLinksetInboundAcl
Packets are filtered against this access control list before they are passed to the routing function. A value of zero indicates that no access control list is present.
cSpLinksetOutboundAcl
Packets are filtered against this access control list after they have passed through the routing function. A value of zero indicates that no access control list is present.
cSpLinksetSnmmRouteTableName
The routing table for signalling network management messages.
cSpLinksetSntmRouteTableName
The routing table for signalling network test and maintenance messages.
cSpLinksetSpare2RouteTableName
This routing table has been defined as a spare routing table by the standards committee.
cSpLinksetSccpRouteTableName
The routing table for SS7 Signaling Connection Control Part(SCCP) messages.
cSpLinksetTupRouteTableName
The routing table for Telephone User Part(TUP) messages.
cSpLinksetIsupRouteTableName
The routing table for ISDN User Part messages.
cSpLinksetDupcRouteTableName
The routing table for Data User Part (call and circuit-related messages).
cSpLinksetDupfRouteTableName
The routing table for Data User Part (facility registration and cancellation messages).
cSpLinksetMtupRouteTableName
The routing table for MTP Testing User Part messages.
cSpLinksetBisupRouteTableName
The routing table for Broadband ISDN User Part(BISUP) messages.
cSpLinksetSisupRouteTableName
The routing table for Satellite ISDN User Part(SISUP) messages.
cSpLinksetSpare11RouteTableName
This routing table has been defined as a spare routing table by the standards committee.
cSpLinksetSpare12RouteTableName
This routing table has been defined as a spare routing table by the standards committee.
cSpLinksetSpare13RouteTableName
This routing table has been defined as a spare routing table by the standards committee.
cSpLinksetSpare14RouteTableName
This routing table has been defined as a spare routing table by the standards committee.
cSpLinksetSpare15RouteTableName
This routing table has been defined as a spare routing table by the standards committee.
cSpLinksetAccountingEnabled
This indicates if accounting for this linkset is enabled. 'true' Indicates that the accounting function is enabled for this linkset and is being accumulated in cSpAccountingTable. 'false' Indicates that the accounting function is disabled.
cSpLinksetNumLinks
The number of links in this linkset.
cSpLinksetPacketsSent
The number of packets(message signal units) transmitted by this linkset(Q752/3.3).
cSpLinksetHCPacketsSent
The number of packets(message signal units) transmitted by this linkset(Q752/3.3). This is the 64-bit version of cSpLinksetPacketsSent.
cSpLinksetPacketsRcvd
The number of packets(message signal units) received by this linkset(Q752/3.5).
cSpLinksetHCPacketsRcvd
The number of packets(message signal units) received by this linkset(Q752/3.5). This is the 64-bit version of cSpLinksetPacketsRcvd.
cSpLinksetBytesSent
The number of bytes transmitted by this linkset(Q752/3.1).
cSpLinksetHCBytesSent
The number of bytes transmitted by this linkset(Q752/3.1). This is the 64-bit version of cSpLinksetBytesSent.
cSpLinksetBytesRcvd
The number of bytes received by this linkset(Q752/3.4).
cSpLinksetHCBytesRcvd
The number of bytes received by this linkset(Q752/3.4). This is the 64-bit version of cSpLinksetBytesRcvd.
cSpLinksetDurationInService
Time linkset was providing service related to Q752/Table 4.2.
cSpLinksetDurationOutService
Time linkset was Out-of-Service as required for Q752/Table 4.2.
cSpLinksetMtp2T01
Alignment ready timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpLinksetMtp2T02
Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.
cSpLinksetMtp2T03
Aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.
cSpLinksetMtp2T4N
Proving period timer normal timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpLinksetMtp2T4E
Proving period timer emergency timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.
cSpLinksetMtp2T05
Sending SIB timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.
cSpLinksetMtp2T06
Remote congestion timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpLinksetMtp2T07
Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of cSpSs7Variant The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial.
cSpLinksetMtp2T08
Interval timer for error interval monitor. Note that this timer is only applicable if cSpLinkType is serial.
cSpLinksetMtp3T01
Delay to avoid message mis-sequencing on changeover.
cSpLinksetMtp3T02
Waiting for changeover acknowledgement.
cSpLinksetMtp3T03
Time controlled diversion-delay to avoid mis-sequencing on change back.
cSpLinksetMtp3T04
Waiting for change back acknowledgement (first attempt).
cSpLinksetMtp3T05
Waiting for change back acknowledgement (second attempt).
cSpLinksetMtp3T06
Delay to avoid message mis-sequencing on controlled rerouting.
cSpLinksetMtp3T07
Waiting for signalling data link connection acknowledgement.
cSpLinksetMtp3T08
Transfer prohibited inhibition timer (transient solution).
cSpLinksetMtp3T10
Waiting to repeat signalling routeset test message.
cSpLinksetMtp3T11
Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).
cSpLinksetMtp3T12
Waiting for uninhibit acknowledgement.
cSpLinksetMtp3T13
Waiting for force uninhibit.
cSpLinksetMtp3T14
Waiting for inhibition acknowledgement.
cSpLinksetMtp3T15
Waiting to start signalling routeset congestion test.
cSpLinksetMtp3T16
Waiting for routeset congestion status update.
cSpLinksetMtp3T17
Delay to avoid oscillation of initial alignment failure and link restart.
cSpLinksetMtp3T18
Timer within a signalling point whose MTP restarts, for supervising link and linkset activation as well as the receipt of routing information.
cSpLinksetMtp3T19
Supervision timer during MTP restart to avoid possible ping-pong of TFP, TFR2) and TRA messages.
cSpLinksetMtp3T20
Overall MTP restart timer at the signalling point whose MTP restarts. Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.
cSpLinksetMtp3T21
Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.
cSpLinksetMtp3T22
Local inhibit test timer.
cSpLinksetMtp3T23
Remote inhibit test timer.
cSpLinksetMtp3T24
Stabilizing timer after removal of local processor outage, used in LPO latching to RPO (national option)
cSpLinksetMtp3T25
Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.
cSpLinksetMtp3T26
Timer at restarting SP waiting to repeat traffic restart waiting message.
cSpLinksetMtp3T27
Minimum duration of unavailability for full restart.
cSpLinksetMtp3T28
Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.
cSpLinksetMtp3T29
Timer started when TRA sent in response to unexpected TRA or TRW.
cSpLinksetMtp3T30
Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.
cSpLinksetMtp3T31
False link congestion detection timer.
cSpLinksetMtp3T32
Link oscillation timer - Procedure A.
cSpLinksetMtp3T33
Probation timer for link oscillation - Procedure B.
cSpLinksetMtp3T34
Suspension timer for link oscillation - Procedure B.
cSpLinkTable
A table of SP links for this SP.
cSpLinkTableEntry
A list of SP link attributes.
cSpLinkSlc
The Signalling Link Code for this link.
cSpLinkState
The status of this link.
cSpLinkType
The link type.
cSpLinkifIndex
If the link type specified by cSpLinkType is serial, this is the ifIndex specified in MIB-2, otherwise no significance is to be placed on this value.
cSpLinkSctpAssociation
If the link type specified by cSpLinkType is sctpIp, this is the sctpAssocId defined in the CISCO-SCTP-MIB. Where value greater than or equal to zero indicates a valid association and negative one indicates an invalid association. This value will always b ...
cSpLinkMtp3PacketsRcvd
The number of MTP3 packets received by this link. This measurement is specified in Q752/3.5
cSpLinkMtp3PacketsSent
The number of MTP3 packets sent by this link. This measurement is specified in Q752/3.3
cSpLinkHCMtp3PacketsRcvd
The number of MTP3 packets received by this link. This is the 64-bit version of cSpLinkMtp3PacketsRcvd. This measurement is specified in Q752/3.5
cSpLinkHCMtp3PacketsSent
The number of MTP3 packets sent by this link. This is the 64-bit version of cSpLinkMtp3PacketsSent. This measurement is specified in Q752/3.3
cSpLinkMtp3BytesRcvd
The number of MTP3 bytes received by this link. This measurement is specified in Q752/3.4
cSpLinkMtp3BytesSent
The number of MTP3 bytes sent by this link. This measurement is specified in Q752/3.1
cSpLinkHCMtp3BytesRcvd
The number of MTP3 bytes received by this link. This is the 64-bit version of cSpLinkMtp3BytesRcvd. This measurement is specified in Q752/3.4
cSpLinkHCMtp3BytesSent
The number of MTP3 bytes sent by this link. This is the 64-bit version of cSpLinkMtp3BytesSent. This measurement is specified in Q752/3.1
cSpLinkMtp2T01
Alignment ready timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType value is equal to 'serial'. A get on this object will return a ...
cSpLinkMtp2T02
Not aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType i ...
cSpLinkMtp2T03
Aligned timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is no ...
cSpLinkMtp2T4N
Proving period timer normal timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references.
cSpLinkMtp2T4E
Proving period timer emergency timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a ze ...
cSpLinkMtp2T05
Sending SIB timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType i ...
cSpLinkMtp2T06
Remote congestion timer. The default and valid range is dependant on the value of cSpSs7Variant. The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLink ...
cSpLinkMtp2T07
Excessive delay of acknowledgement timer. The default and valid range is dependant on the value of cSpSs7Variant The ranges are defined in the following references. This timer is only applicable if cSpLinkType is serial. A get on this object will return a ...
cSpLinkMtp2T08
Interval timer for error interval monitor. Note that this timer is only applicable if cSpLinkType is serial. A get on this object will return a zero if cSpLinkType is not serial.
cSpLinkMtp3T01
Delay to avoid message mis-sequencing on changeover.
cSpLinkMtp3T02
Waiting for changeover acknowledgement.
cSpLinkMtp3T03
Time controlled diversion-delay to avoid mis-sequencing on change back.
cSpLinkMtp3T04
Waiting for change back acknowledgement (first attempt).
cSpLinkMtp3T05
Waiting for change back acknowledgement (second attempt).
cSpLinkMtp3T06
Delay to avoid message mis-sequencing on controlled rerouting.
cSpLinkMtp3T07
Waiting for signalling data link connection acknowledgement.
cSpLinkMtp3T08
Transfer prohibited inhibition timer (transient solution).
cSpLinkMtp3T10
Waiting to repeat signalling routeset test message.
cSpLinkMtp3T11
Transfer restricted timer. (This is one way of implementing the function described in 13.4/Q.704 and mainly intended to simplify SPs.).
cSpLinkMtp3T12
Waiting for uninhibit acknowledgement.
cSpLinkMtp3T13
Waiting for force uninhibit.
cSpLinkMtp3T14
Waiting for inhibition acknowledgement.
cSpLinkMtp3T15
Waiting to start signalling routeset congestion test.
cSpLinkMtp3T16
Waiting for routeset congestion status update.
cSpLinkMtp3T17
Delay to avoid oscillation of initial alignment failure and link restart.
cSpLinkMtp3T18
Timer within a signalling point whose MTP restarts, for supervising link and linkset activation as well as the receipt of routing information.
cSpLinkMtp3T19
Supervision timer during MTP restart to avoid possible ping-pong of TFP, TFR2) and TRA messages.
cSpLinkMtp3T20
Overall MTP restart timer at the signalling point whose MTP restarts. Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.
cSpLinkMtp3T21
Overall MTP restart timer at a signalling point adjacent to one whose MTP restarts.
cSpLinkMtp3T22
Local inhibit test timer.
cSpLinkMtp3T23
Remote inhibit test timer.
cSpLinkMtp3T24
Stabilizing timer after removal of local processor outage, used in LPO latching to RPO (national option)
cSpLinkMtp3T25
Timer at Signalling Point (SP) adjacent to restarting SP, waiting for traffic restart allowed message.
cSpLinkMtp3T26
Timer at restarting SP waiting to repeat traffic restart waiting message.
cSpLinkMtp3T27
Minimum duration of unavailability for full restart.
cSpLinkMtp3T28
Timer at SP adjacent to restarting SP waiting for traffic restart waiting message.
cSpLinkMtp3T29
Timer started when TRA sent in response to unexpected TRA or TRW.
cSpLinkMtp3T30
Timer to limit sending of TFPs and TFRs in response to unexpected TRA or TRW.
cSpLinkMtp3T31
False link congestion detection timer.
cSpLinkMtp3T32
Link oscillation timer - Procedure A.
cSpLinkMtp3T33
Probation timer for link oscillation - Procedure B.
cSpLinkMtp3T34
Suspension timer for link oscillation - Procedure B.
cSpLinkXmitQueueDepth
Number of packets waiting to be sent over this link.
cSpLinkXmitQueueDepthHigh
This is the maximum number of packets waiting to be sent over this link since the last time this value was reset as indicated by cSpLinkXmitQueueDepthHighReset. Resetting this object is achieved by setting this object to 0. Attempting to set this object t ...
cSpLinkXmitQueueDepthHighReset
This indicates when cSpLinkXmitQueueDepthHigh was set to 0.
cSpLinkCongestionState
The signalling link congestion status of this link. 0 is the least congestion level, 3 is the highest congestion level.
cSpLinkCongestionAbate1
Threshold used to abate congestion level 1.
cSpLinkCongestionAbate2
Threshold used to abate congestion level 2.
cSpLinkCongestionAbate3
Threshold used to abate congestion level 3.
cSpLinkCongestionOnset1
Threshold used to mark onset of congestion level 1.
cSpLinkCongestionOnset2
Threshold used to mark onset of congestion level 2.
cSpLinkCongestionOnset3
Threshold used to mark onset of congestion level 3.
cSpLinkSigLinkTest
Indicated if signalling link test is enabled on this link. true : signalling link test is enabled. false : signalling link test not enabled.
cSpLinkQ752T1E1
Duration of link in the In-Service state Q752/1.1.
cSpLinkQ752T1E2
Count of Signalling Link failures - All reasons Q752/1.2.
cSpLinkQ752T1E3
Count of Signalling Link failures - Abnormal FIBR/BSNR Q752/1.4.
cSpLinkQ752T1E4
Count of Signalling Link failures - Excessive delay of acknowledgement Q752/1.4.
cSpLinkQ752T1E5
Count of Signalling Link failures - Excessive error rate Q752/1.5.
cSpLinkQ752T1E6
Count of Signalling Link failures - Excessive duration of congestion Q752/1.6.
cSpLinkQ752T1E7
Count of alignment or proving errors Q752/1.7.
cSpLinkQ752T1E8
Count of signal units received in error Q752/1.8.
cSpLinkQ752T1E9
Count of negative acknowledgements received Q752/1.9.
cSpLinkQ752T1E10
Count of 'local automatic changeover' events Q752/1.10.
cSpLinkQ752T1E11
Count of 'local automatic changeback' events Q752/1.11.
cSpLinkQ752T2E1
Duration of Signalling Link unavailable(for any reason) Q752/2.1.
cSpLinkQ752T2E5
Duration of Signalling Link unavailable due to local management actions Q752/2.5.
cSpLinkQ752T2E6
Duration of Signalling Link unavailable due to remote management actions Q752/2.6.
cSpLinkQ752T2E7
Duration of Signalling Link unavailable due to link failure Q752/2.7.
cSpLinkQ752T2E9
Duration of Signalling Link unavailable due to remote processor outage Q752/2.9.
cSpLinkQ752T2E10
Count of 'remote processor outage' events Q752/2.10 and Q752/2.11. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
cSpLinkQ752T2E15
Duration of local busy Q752/2.15.
cSpLinkQ752T2E16
Count of local inhibition Q752/2.16 and Q752/2.17. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
cSpLinkQ752T2E18
Count of remote inhibition Q752/2.18 and Q752/2.19. The standard only requires that events are issued. The entries have been combined into a single entry to track all occurrences of these event types.
cSpLinkMtp3PacketsRetrans
The number of MTP3 packets retransmitted on this link. This measurement is specified in Q752/3.2
cSpLinkMtp3BytesRetrans
The number of MTP3 bytes retransmitted on this link. This measurement is specified in Q752/3.2
cSpLinkQ752T3E6
The number times this signalling link was marked congested. This measurement is specified in Q752/3.6
cSpLinkQ752T3E7
Cumulative duration of signalling link congestion Q752/3.7.
cSpLinkQ752T3E10L1
The number of packets(MSUs) discarded due to signalling link level 1 congestion Q752/3.10
cSpLinkQ752T3E10L2
The number of packets(MSUs) discard due to signalling link level 2 congestion Q752/3.10
cSpLinkQ752T3E10L3
The number of packets(MSUs) discard due to signalling link level 3 congestion Q752/3.10
cSpLinkQ752T3E11L1
The number times this signalling link entered congestion level 1 and packets were discarded. This measurement is specified in Q752/3.11
cSpLinkQ752T3E11L2
The number times this signalling link entered congestion level 2 and packets were discarded. This measurement is specified in Q752/3.11
cSpLinkQ752T3E11L3
The number times this signalling link entered congestion level 3 and packets were discarded. This measurement is specified in Q752/3.11
cSpRouteTable
The route table for determining the linkset that a packet must traverse to arrive at its destination node given by the destination point code.
cSpRouteTableEntry
A list statements used to route mtp3 packets. Information in packets are matched against the information in each route statements and the packet is sent on the selected linkset.
cSpRouteTableName
The configured name for this route table.
cSpRouteDpc
The destination point code.
cSpRouteDestLsCost
The cost assigned to this linkset matching this route. Higher numbers represent higher cost.
cSpRouteDestLinkset
The linkset that the packet is to be forwarded to on matching this route.
cSpRouteMask
The mask used to define which part of cSpRouteDpc is significant when comparing the cSpRouteDpc to the destination code point in the packet to be routed.
cSpRouteStatus
The status of the route from the perspective of the Signaling Point.
cSpAclTable
A table of SP access controls. The access control definition controls which packets are accepted or rejected. The access control may be applied before sending the packet to the routing table or may be applied after the packet is processed by the routing t ...
cSpAclTableEntry
A list of SP access control attributes.
cSpAclId
The identifier for this ACL.
cSpAclEntryNumber
An numeric value assigned to each access list entry. The values start with zero and increase by one.
cSpAclType
This indicates which columns are used in determining the matching criteria for this access control. 'dpc' : cSpAclDpc and cSpAclDpcMask are the relevant columns. The packet is compared to cSpAclDpc in conjunction with cSpAclDpcMask to determine if the pac ...
cSpAclDpc
The destination point code specified for this ACL.
cSpAclDpcMask
The mask used to define which part of the point code in the packet is significant when comparing the destination point code with cSpAclDpc.
cSpAclOpc
The origin point code specified in this ACL.
cSpAclOpcMask
The mask used to define which part of the origin point code in the packet is significant when comparing the origin point code with cSpAclDpc.
cSpAclSi
The Service Indicator Octet.
cSpAclPattern
The pattern used to match a packet at offset cSpAclOffset.
cSpAclOffset
The offset into the packet were we begin matching the pattern specified by cSpAclPattern is to start.
cSpAclAction
The action to be performed on the packet that matched this access control.
cSpAccountingTable
A table of packet and byte counts for packets that match an ACL in the linkset's inbound ACL and in the outbound ACL. These counters are updated no more frequently than the value specified by cSpAccCheckPointPeriod. Polling more frequently than this perio ...
cSpAccountingTableEntry
A list of accounting objects.
cSpAccTableId
The accounting table identifier. 'passed' : signifies that this table instance represents statistics for packets that matched an ACL in the linkset's inbound ACL and in the outbound ACL. 'violation' : signifies that this table instance represents stati ...
cSpAccDpc
The destination point code.
cSpAccOpc
The origin point code.
cSpAccRcvdPackets
Sum of all received packets for this linkset, DPC and OPC combination.
cSpAccHCRcvdPackets
Sum of all received packets for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccRcvdPackets .
cSpAccSentPackets
Sum of all transmitted packets for this linkset, DPC and OPC combination.
cSpAccHCSentPackets
Sum of all transmitted packets for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSentPackets .
cSpAccRcvdBytes
Sum of all received bytes for this linkset, DPC and OPC combination.
cSpAccHCRcvdBytes
Sum of all received bytes for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccRcvdBytes .
cSpAccSentBytes
Sum of all transmitted bytes for this linkset, DPC and OPC combination.
cSpAccHCSentBytes
Sum of all transmitted bytes for this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSentBytes .
cSpAccSnmmRcvdPackets
Count of Signalling Network Management (SNM) packets received on this linkset, DPC and OPC combination.
cSpAccHCSnmmRcvdPackets
Count of Signalling Network Management (SNM) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmRcvdPackets .
cSpAccSnmmRcvdBytes
Count of bytes contained in the Signalling Network Management (SNM) messages received on this linkset, DPC and OPC combination.
cSpAccHCSnmmRcvdBytes
Count of bytes contained in the Signalling Network Management (SNM) messages received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmRcvdBytes .
cSpAccSnmmSentPackets
Count of Signalling Network Management (SNM) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCSnmmSentPackets
Count of Signalling Network Management (SNM) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmSentPackets .
cSpAccSnmmSentBytes
Count of Signalling Network Management (SNM) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCSnmmSentBytes
Count of Signalling Network Management (SNM) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSnmmSentBytes .
cSpAccSntmRcvdPackets
Count of Signalling Network Testing and maintenance (MTN) packets received on this linkset, DPC and OPC combination.
cSpAccHCSntmRcvdPackets
Count of Signalling Network Testing and maintenance (MTN) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmRcvdPackets .
cSpAccSntmRcvdBytes
Count of Signalling Network Testing and maintenance (MTN) bytes received on this linkset, DPC and OPC combination.
cSpAccHCSntmRcvdBytes
Count of Signalling Network Testing and maintenance (MTN) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmRcvdBytes .
cSpAccSntmSentPackets
Count of Signalling Network Testing and maintenance (MTN) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCSntmSentPackets
Count of Signalling Network Testing and maintenance (MTN) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmSentPackets .
cSpAccSntmSentBytes
Count of Signalling Network Testing and maintenance (MTN) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCSntmSentBytes
Count of Signalling Network Testing and maintenance (MTN) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSntmSentBytes .
cSpAccSpare2RcvdPackets
Count of packets with Service Indicator value 2 received on this linkset, DPC and OPC combination.
cSpAccHCSpare2RcvdPackets
Count of packets with Service Indicator value 2 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2RcvdPackets .
cSpAccSpare2RcvdBytes
Count of bytes with Service Indicator value 2 received on this linkset, DPC and OPC combination.
cSpAccHCSpare2RcvdBytes
Count of bytes with Service Indicator value 2 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2RcvdBytes .
cSpAccSpare2SentPackets
Count of packets with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare2SentPackets
Count of packets with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2SentPackets .
cSpAccSpare2SentBytes
Count of bytes with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare2SentBytes
Count of bytes with Service Indicator value 2 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare2SentBytes .
cSpAccSccpRcvdPackets
Count of Signaling Connection Control Part (SCCP) packets received on this linkset, DPC and OPC combination.
cSpAccHCSccpRcvdPackets
Count of Signaling Connection Control Part (SCCP) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpRcvdPackets .
cSpAccSccpRcvdBytes
Count of Signaling Connection Control Part (SCCP) bytes received on this linkset, DPC and OPC combination.
cSpAccHCSccpRcvdBytes
Count of Signaling Connection Control Part (SCCP) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpRcvdBytes .
cSpAccSccpSentPackets
Count of Signaling Connection Control Part (SCCP) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCSccpSentPackets
Count of Signaling Connection Control Part (SCCP) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpSentPackets .
cSpAccSccpSentBytes
Count of Signaling Connection Control Part (SCCP) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCSccpSentBytes
Count of Signaling Connection Control Part (SCCP) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSccpSentBytes .
cSpAccTupRcvdPackets
Count of Telephone User Part (TUP) packets received on this linkset, DPC and OPC combination.
cSpAccHCTupRcvdPackets
Count of Telephone User Part (TUP) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupRcvdPackets .
cSpAccTupRcvdBytes
Count of Telephone User Part (TUP) bytes received on this linkset, DPC and OPC combination.
cSpAccHCTupRcvdBytes
Count of Telephone User Part (TUP) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupRcvdBytes .
cSpAccTupSentPackets
Count of Telephone User Part (TUP) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCTupSentPackets
Count of Telephone User Part (TUP) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupSentPackets .
cSpAccTupSentBytes
Count of Telephone User Part (TUP) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCTupSentBytes
Count of Telephone User Part (TUP) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccTupSentBytes .
cSpAccIsupRcvdPackets
Count of ISDN User Part (ISUP) packets received on this linkset, DPC and OPC combination.
cSpAccHCIsupRcvdPackets
Count of ISDN User Part (ISUP) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupRcvdPackets .
cSpAccIsupRcvdBytes
Count of ISDN User Part (ISUP) bytes received on this linkset, DPC and OPC combination.
cSpAccHCIsupRcvdBytes
Count of ISDN User Part (ISUP) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupRcvdBytes .
cSpAccIsupSentPackets
Count of ISDN User Part (ISUP) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCIsupSentPackets
Count of ISDN User Part (ISUP) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupSentPackets .
cSpAccIsupSentBytes
Count of ISDN User Part (ISUP) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCIsupSentBytes
Count of ISDN User Part (ISUP) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccIsupSentBytes .
cSpAccDupcRcvdPackets
Count of Data User Part (call and circuit-related messages) - Dupc packets received on this linkset, DPC and OPC combination.
cSpAccHCDupcRcvdPackets
Count of Data User Part (call and circuit-related messages) - Dupc packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcRcvdPackets .
cSpAccDupcRcvdBytes
Count of Dupc bytes received on this linkset, DPC and OPC combination.
cSpAccHCDupcRcvdBytes
Count of Dupc bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcRcvdBytes .
cSpAccDupcSentPackets
Count of Dupc packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCDupcSentPackets
Count of Dupc packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcSentPackets .
cSpAccDupcSentBytes
Count of Dupc bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCDupcSentBytes
Count of Dupc bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupcSentBytes .
cSpAccDupfRcvdPackets
Count of Data User Part (facility registration and cancellation messages) - Dupf packets received on this linkset, DPC and OPC combination.
cSpAccHCDupfRcvdPackets
Count of Data User Part (facility registration and cancellation messages) - Dupf packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfRcvdPackets .
cSpAccDupfRcvdBytes
Count of Dupf bytes received on this linkset, DPC and OPC combination.
cSpAccHCDupfRcvdBytes
Count of Dupf bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfRcvdBytes .
cSpAccDupfSentPackets
Count of Dupf packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCDupfSentPackets
Count of Dupf packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfSentPackets .
cSpAccDupfSentBytes
Count of Dupf bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCDupfSentBytes
Count of Dupf bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccDupfSentBytes .
cSpAccMtupRcvdPackets
Count of Reserved for MTP Testing User Part (Mtup) packets received on this linkset, DPC and OPC combination.
cSpAccHCMtupRcvdPackets
Count of Reserved for MTP Testing User Part (Mtup) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupRcvdPackets .
cSpAccMtupRcvdBytes
Count of Reserved for MTP Testing User Part (Mtup) bytes received on this linkset, DPC and OPC combination.
cSpAccHCMtupRcvdBytes
Count of Reserved for MTP Testing User Part (Mtup) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupRcvdBytes .
cSpAccMtupSentPackets
Count of Reserved for MTP Testing User Part (Mtup) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCMtupSentPackets
Count of Reserved for MTP Testing User Part (Mtup) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupSentPackets .
cSpAccMtupSentBytes
Count of Reserved for MTP Testing User Part (Mtup) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCMtupSentBytes
Count of Reserved for MTP Testing User Part (Mtup) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccMtupSentBytes .
cSpAccBisupRcvdPackets
Count of Broadband ISDN User Part (Bisup) packets received on this linkset, DPC and OPC combination.
cSpAccHCBisupRcvdPackets
Count of Broadband ISDN User Part (Bisup) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupRcvdPackets .
cSpAccBisupRcvdBytes
Count of Broadband ISDN User Part (Bisup) bytes received on this linkset, DPC and OPC combination.
cSpAccHCBisupRcvdBytes
Count of Broadband ISDN User Part (Bisup) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupRcvdBytes .
cSpAccBisupSentPackets
Count of Broadband ISDN User Part (Bisup) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCBisupSentPackets
Count of Broadband ISDN User Part (Bisup) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupSentPackets .
cSpAccBisupSentBytes
Count of Broadband ISDN User Part (Bisup) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCBisupSentBytes
Count of Broadband ISDN User Part (Bisup) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccBisupSentBytes .
cSpAccSisupRcvdPackets
Count of Satellite ISDN User Part (Sisup) packets received on this linkset, DPC and OPC combination.
cSpAccHCSisupRcvdPackets
Count of Satellite ISDN User Part (Sisup) packets received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupRcvdPackets .
cSpAccSisupRcvdBytes
Count of Satellite ISDN User Part (Sisup) bytes received on this linkset, DPC and OPC combination.
cSpAccHCSisupRcvdBytes
Count of Satellite ISDN User Part (Sisup) bytes received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupRcvdBytes .
cSpAccSisupSentPackets
Count of Satellite ISDN User Part (Sisup) packets transmitted on this linkset, DPC and OPC combination.
cSpAccHCSisupSentPackets
Count of Satellite ISDN User Part (Sisup) packets transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupSentPackets .
cSpAccSisupSentBytes
Count of Satellite ISDN User Part (Sisup) bytes transmitted on this linkset, DPC and OPC combination.
cSpAccHCSisupSentBytes
Count of Satellite ISDN User Part (Sisup) bytes transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSisupSentBytes .
cSpAccSpare11RcvdPackets
Count of packets with Service Indicator value 11 received on this linkset, DPC and OPC combination.
cSpAccHCSpare11RcvdPackets
Count of packets with Service Indicator value 11 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11RcvdPackets .
cSpAccSpare11RcvdBytes
Count of bytes with Service Indicator value 11 received on this linkset, DPC and OPC combination.
cSpAccHCSpare11RcvdBytes
Count of bytes with Service Indicator value 11 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11RcvdBytes .
cSpAccSpare11SentPackets
Count of packets with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare11SentPackets
Count of packets with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11SentPackets .
cSpAccSpare11SentBytes
Count of bytes with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare11SentBytes
Count of bytes with Service Indicator value 11 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare11SentBytes .
cSpAccSpare12RcvdPackets
Count of packets with Service Indicator value 12 received on this linkset, DPC and OPC combination.
cSpAccHCSpare12RcvdPackets
Count of packets with Service Indicator value 12 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12RcvdPackets .
cSpAccSpare12RcvdBytes
Count of bytes with Service Indicator value 12 received on this linkset, DPC and OPC combination.
cSpAccHCSpare12RcvdBytes
Count of bytes with Service Indicator value 12 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12RcvdBytes .
cSpAccSpare12SentPackets
Count of packets with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare12SentPackets
Count of packets with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12SentPackets .
cSpAccSpare12SentBytes
Count of bytes with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare12SentBytes
Count of bytes with Service Indicator value 12 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare12SentBytes .
cSpAccSpare13RcvdPackets
Count of packets with Service Indicator value 13 received on this linkset, DPC and OPC combination.
cSpAccHCSpare13RcvdPackets
Count of packets with Service Indicator value 13 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13RcvdPackets .
cSpAccSpare13RcvdBytes
Count of bytes with Service Indicator value 13 received on this linkset, DPC and OPC combination.
cSpAccHCSpare13RcvdBytes
Count of bytes with Service Indicator value 13 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13RcvdBytes .
cSpAccSpare13SentPackets
Count of packets with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare13SentPackets
Count of packets with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13SentPackets .
cSpAccSpare13SentBytes
Count of bytes with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare13SentBytes
Count of bytes with Service Indicator value 13 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare13SentBytes .
cSpAccSpare14RcvdPackets
Count of packets with Service Indicator value 14 received on this linkset, DPC and OPC combination.
cSpAccHCSpare14RcvdPackets
Count of packets with Service Indicator value 14 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare14RcvdPackets .
cSpAccSpare14RcvdBytes
Count of bytes with Service Indicator value 14 received on this linkset, DPC and OPC combination.
cSpAccHCSpare14RcvdBytes
Count of bytes with Service Indicator value 14 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare14RcvdBytes .
cSpAccSpare14SentPackets
Count of packets with Service Indicator value 14 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare14SentPackets
Count of packets with Service Indicator value 14 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare14SentPackets .
cSpAccSpare14SentBytes
Count of bytes with Service Indicator value 14 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare14SentBytes
Count of bytes with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15SentBytes .
cSpAccSpare15RcvdPackets
Count of packets with Service Indicator value 15 received on this linkset, DPC and OPC combination.
cSpAccHCSpare15RcvdPackets
Count of packets with Service Indicator value 15 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15RcvdPackets .
cSpAccSpare15RcvdBytes
Count of bytes with Service Indicator value 15 received on this linkset, DPC and OPC combination.
cSpAccHCSpare15RcvdBytes
Count of bytes with Service Indicator value 15 received on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15RcvdBytes .
cSpAccSpare15SentPackets
Count of packets with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare15SentPackets
Count of packets with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15SentPackets .
cSpAccSpare15SentBytes
Count of bytes with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination.
cSpAccHCSpare15SentBytes
Count of bytes with Service Indicator value 15 transmitted on this linkset, DPC and OPC combination. This is the 64 bit version of cSpAccSpare15SentBytes .
cSpLsStateChangeNotifEnabled
The SP linkset notification truth value. 'true' Indicates that ciscoSpLinksetStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that ciscoSpLinksetStateChange notificatio ...
cSpLnkStateChangeNotifEnabled
The SP link notification truth value. 'true' Indicates that ciscoSpLinkStateChange notification is to be generated when the state changes. That is, the notification generation is enabled. 'false' Indicates that ciscoSpLinkStateChange notification generat ...
ciscoSpSwitchGroup
SP main objects.
ciscoSpLinksetGroup
SP linkset objects.
ciscoSpLinkGroup
SP link objects.
ciscoSpRouteGroup
SP route table objects.
ciscoSpAccessListGroup
SP access control list objects.
ciscoSpAccountingGroup
SP accounting objects.
ciscoSpNotificationsEnableGroup
SP enable notification objects.

Download IPHost Network Monitor (500 monitors for 30 days, 50 monitors free forever) to start monitoring network devices right now.

MIBs list